A2FE80/61W-VAL100 Rexroth Fixed Plug-In Motor Type A2FE Rexroth Hydraulic Pump

Product Specification

A2FE80/61W-VAL100 Rexroth Fixed Plug-In Motor Type A2FE

Hydraulic fixed motor A2FE28, A2FE32, A2FE45, A2FE56, A2FE63, A2FE80, A2FE90, A2FE107, A2FE125, A2FE160, A2FE180,A2FE250, A2FE355

Open and closed circuits
Series 61 and 60
Pressure:
Size 28 to180 Nominal pressure 5800 psi (400 bar)/ Peak pressure 6500 psi (450 bar)
Size 250 to 355 Nominal pressure 5100 psi (350 bar)/ Peak pressure 5800 psi (400 bar)

Features:
The A2FE fixed plug-in motor with axial tapered piston rotary group of bent-axis design, for hydrostatic drives in open and closed circuits
–Far-reaching integration in mechanical gearbox due to recessed mounting flange loSAARed in the center of the case (extremely space-saving construction)
–The output speed is dependent on the flow of the pump and the displacement of the motor.
–The output torque increases with the pressure differential between the high-pressure and the low-pressure side.
–Small dimensions.
–High total efficiency.
–Complete unit, ready-assembled and tested.
–Easy to install, simply plug into the mechanical gearbox.
–No configuration specifiSAARions to be observed when installing.

* Variable axial piston pump of swashplate design for hydrosta- tic drives in open circuit hydraulic
* Designed primarily for use in mobile
* The pump operates under self-priming conditions, with tank pressurization, or with an optional built-in charge pump (impeller).
* Acomprehensive range of control options is available matching any application
* Power control option is externally adjustable, even when the pump is
* The through drive is suitable for adding gear pumps and axial pistonpumps up to the same, e. 100% through drive.
* Theoutput flow is proportional to the drive speed and infinitely variable between qV max and qV min =

Technical Data

Table of values (theoretical values, without efficiency and tolerances; values rounded)