Functions

• Provides 10M/100M Ethernet electrical interfaces and 100M optical interfaces, whose electrical characteristics, such as the flow control function, comply with IEEE 802.3x.

• Supports the working modes of auto-negotiation, 100M full-duplex/half-duplex and 10M full-duplex/half-duplex.

• Supports the ML-PPP encapsulation protocol with the encapsulation granularity of VC-12.

• Provides bandwidth sharing and statistical multiplexing based on virtual local area network (VLAN) and port to improve the bandwidth utilization.

• Supports Ethernet layer 2 switching.

• Supports isolation among different users, and VLAN isolation within one user.

• The ET1 and ET1D boards support Ethernet private line (EPL) services. The ET1O, ET1D, and EF1 boards support Ethernet private LAN (EPLAN) services.

• Supports multicast and broadcast.

• Supports the Rapid Spanning Tree Protocol (RSTP) to prevent broadcast storms.

Table 1 lists the functions of the ET1, ET1O, ET1D, and EF1 boards.

Application

The ET1, ET1O, ET1D, and EF1 boards are interconnected with PCs, routers or Ethernet switches to transmit Ethernet services. Pay attention to the following points:

• The ET1 and ET1D boards support transparent transmission of services and are applicable to EPL services.

• The ET1O, ET1D, and EF1 boards support layer 2 switching of services and are applicable to EPLAN services.

• The EF1 board provides 100M optical interfaces and can be interconnected with the data equipment that provides 100M optical interfaces.

• The ET1, ET1O, ET1D, and EF1 boards use the same encapsulation protocol and mapping granularity. Hence, they can be interconnected with each other.

Parameters Specified for Electrical Interfaces

Table 1 lists the parameters specified for the electrical interfaces of the ET1/ET1O/ET1D/EF1.

Parameters Specified for Optical Interfaces

Table 2 lists the parameters specified for the optical interfaces of the EF1.

Mechanical Specifications

The mechanical specifications of the ET1/ET1O are as follows:

• Dimensions (width x depth x height): 321.0 mm x 218.5 mm x 24.0 mm
• Weight: 0.74 kg

The mechanical specifications of the EF1 are as follows:

• Dimensions (width x depth x height): 321.0 mm x 218.5 mm x 24.0 mm
• Weight: 0.68 kg

The mechanical specifications of the ET1D are as follows:

• Dimensions (width x depth x height): 89.0 mm x 218.5 mm x 24.0 mm
• Weight: 0.26 kg

Power Consumption

• The maximum power consumption of the ET1/ET1O at room temperature (25°C) is 26.1 W.

• The maximum power consumption of the ET1D at room temperature (25°C) is 16 W.
• The maximum power consumption of the EF1 at room temperature (25°C) is 25 W.

Notice:

Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:

Deliver to port:

Uonel is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Uonel will recommend trustworthy local freight forwarders to you.Uonel can facilitate the progress under buyer's permission and at buyer's expense.

Deliver to door:

Uonel will quote all destination charge prior once we have confirmed order.
Uonel is responsible for transporting goods to door after you have made the payment.

Standard Hardware Warranty Policy:

Original new sealed  product: 1 Year

The Support Contacts:

If your  products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.