Henan Hongtai Kiln Refractory Co.,Ltd.
| Application | Liners Of Industrial Furnace |
| Thickness | 6/10/15/20/25/30/40/50 Mm |
| Width | 1000/700/600 Mm |
| Length | 1200/1000/900 Mm |
| Grade | HP (High Pure) |
| Chemical Composition | AL2O3+SIO2 |
| Ultimate Strength (≥ MPa) | 0.5MPa |
| Working Temperature | 1100C |
| Fiber Diameter | 3-5um |
| Thermal Conductivity | 0.085(400C)/0.132(800C) |
| Shrinkage (1800℉, 3h) | 3%(24h) |
| Product name | HP1260, HA1400alumina ceramic fiber board |
| Color | White |
| Type | Factory |
| samples | free |
| Size | Customer's Requirements |
| Place of Origin | Henan, China |
| Model Number | 1260 STD |
| Brand Name | Hongtai |
| Certification | ISO9001:2008 |
View Detail Information
Explore similar products
Furan Resin Adhesive Motar Cathode Paste for Aluminum Reduction Cell in
SiC Content % Chrome Oxide Brick Refractory for Density Industrial Furnace
Purging Plug Ladle Well Block with Competitive Al2O3 Content % 90 Certificate
Steel Furnace Zirconia Insert Nozzle 50MPa Cold Crushing Strength for Tundish
Product Specification
| Application | Liners Of Industrial Furnace | Thickness | 6/10/15/20/25/30/40/50 Mm |
| Width | 1000/700/600 Mm | Length | 1200/1000/900 Mm |
| Grade | HP (High Pure) | Chemical Composition | AL2O3+SIO2 |
| Ultimate Strength (≥ MPa) | 0.5MPa | Working Temperature | 1100C |
| Fiber Diameter | 3-5um | Thermal Conductivity | 0.085(400C)/0.132(800C) |
| Shrinkage (1800℉, 3h) | 3%(24h) | Product name | HP1260, HA1400alumina ceramic fiber board |
| Color | White | Type | Factory |
| samples | free | Size | Customer's Requirements |
| Place of Origin | Henan, China | Model Number | 1260 STD |
| Brand Name | Hongtai | Certification | ISO9001:2008 |
HP1260, HA1400alumina ceramic fiber board
Ceramic fiber board,also known as aluminum silicate fiber board, a refractory material. Even after heating, it can maintain good mechanical strength. Comparing with fiber blanket and felt, ceramic fiber board is rigid insulation products and has support strength.
characteristics of HP1260, HA1400alumina ceramic fiber board:
In addition to the corresponding bulk ceramic fiber cotton excellent performance, HP1260, HA1400alumina ceramic fiber board has good characteristics of hard quality, toughness and fine strength, with excellent resistance to the wind erosion. With not inflated in heating, light weight, easy construction, can be arbitrarily shear bending, ceramic fiber board is the ideal energy-saving materials for kiln, pipes and other insulation equipment.
1, high compressive strength, long service life;
2, low heat capacity, low thermal conductivity;
3, non-brittle material, good toughness;
4, the size of precision, good flatness;
5, easy to cut and installation, construction convenience;
6, excellent anti-wind erosion performance;
7, continuous production, fiber distribution, performance and stability.
Common ceramic fiber board:1050 COM
Standard ceramic fiber board:1260 STD
High purity ceramic fiber board:1260 HP
High alumina ceramic fiber board:1400 HA
High Zircon ceramic fiber board:1450 HZ
| Item | 1050 COM | 1260 STD | 1260 HP | 1400 HA | 1450 HZ | |
| working temperature | 950℃(1742℉) | 1050℃(11942℉) | 1100℃(2012℉) | 1200℃(21922℉) | 1350℃(2462℉) | |
| density (kg/m3) | 250 | 280-450 | ||||
| permanent linear change on heating(%) | 950℃*24h | 1050℃*24h | 1100℃*24h | 1200℃*24h | 1350℃*24h | |
| chemical
| AL2O3 | 37% | 46% | 47-49% | 52-55% | 39-40% |
| ZrO2 | —— | —— | —— |
| 15-17% | |
| AL2O3+SiO2 | 96% | 97% | 99% | 99% | —— | |
| AL2O3+SiO2+ZrO2 | —— | —— | —— | —— | 99% | |
| Fe2O3 | ≤1.0% | ≤0.8% | ≤0.2% | ≤0.2% | ≤0.2% | |
| Na2O+k2o | ≤0.8% | ≤0.5% | ≤0.2% | ≤0.2% | ≤0.2% | |
Application of HP1260, HA1400alumina ceramic fiber board
1. cement and other building materials industry kiln back insulation;
2. petrochemical, metallurgical, ceramics, glass industry, the furnace backlash insulation;
3. heat treatment furnace backlash insulation;
4. non-ferrous metal industry back insulation;
5. high temperature reaction, heating equipment back insulation insulation
HP1260, HA1400alumina ceramic fiber board
Use jet fiber (fiber short, thin, easy to break and mixed) as ceramic fiber board raw materials, add a certain proportion of binder, filler-level additives, through the beater, fully dispersed into a slurry in the pulp pool. Pump into the molding tank and stir with compressed air. Put mold into the molding pool, the fiber slurry adsorption on the mold by using principle of vacuum. Precise control the adsorption time, wet fiber material dehydration, stripping, placed in the tray sent to the drying oven drying for 10-24 hours. After drying, the fiberboard is processed through a special grinding machine, trimming machine,to control of the size.
HP1260, HA1400alumina ceramic fiber board
New high efficient drying technology
Because of Ceramic fiber board’s poor thermal conductivity, the traditional hot air drying takes a long time, and the energy consumption is too large, poor drying uniformity. Microwave drying technology is to bypass the problem of poor heat transfer performance, improve the production Efficiency, meet the high efficient energy-saving environmental protection requirements of modern industrial production, solve the traditional ceramic fiberboard drying technology with a long time, slow cash flow , and dry uneven problem.
1. Strong professional:
Our company has thirty years producing experience in refractory product. Our manager will supervise on a various refractory' s production materials, process control, quality supervision and package delivery, and ensure the products are 100% qualified.
2. Annual exports:
Now we have gained a global sales network reaching Taiwan, Russia, Mongolia, South Korea, Vietnam, Pakistan, Bulgaria, Finland, Greece, Spain, Congo, Angola, South Africa, and Maldives, Jordan and so on. The export figure is more than USD 4 million.
3. Production equipment:
Production and testing equipments are new, complete and automated or semi- automated. Such modern facilities and equipments have provided the fine technical guarantee for the production and testing.
4. Testing equipment;
Our company's testing equipments as follows:
High Temperature RUL Tester
Bulk Density Tester
The Pressure Tester
Refractoriness Tester
Company Details
Business Type:
Manufacturer
Year Established:
2012
Total Annual:
10000000-50000000
Employee Number:
100~200
Ecer Certification：
Verified Supplier
Henan Hongtai Kiln Refractory Co., Ltd. is established in 2012, located in Xinmi City, 40 kilometers southwest of Zhengzhou City in Henan Province, close to Jingguang, Longhai railway lines, with road transport facilities. Rich resources of Refractory materials, adequate and qualified fuel in this a... Henan Hongtai Kiln Refractory Co., Ltd. is established in 2012, located in Xinmi City, 40 kilometers southwest of Zhengzhou City in Henan Province, close to Jingguang, Longhai railway lines, with road transport facilities. Rich resources of Refractory materials, adequate and qualified fuel in this a...
Get in touch with us
Leave a Message, we will call you back quickly!