Hot Melt Adhesive For Medical Products / High Tack Hot Melt Adhesive For Elastic

Product Specification

Hot Melt Glue For Medical Tape Plaster High Tack Hot Melt Adhesive For Elastic Bandage

DESCRIPTION
The Jaour this kind adhesive is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed for
medical tapes, plasters and bandages applications. The product is featured high tack and peel, high shear, and
good ageing performance.

SUGGESTED USES
Medical tapes, plasters and bandages, sports tapes.
Other pressure sensitive adhesive applications that high bond strength and tack, high shear are required.

OPERATING GUIDES
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 160 – 180 0 C
for both, depending on machines, substrates, and plant conditions.

FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.

PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.
Please consult the sales representative for special requirements.

STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35 0 C and above 5 0 C.
Direct sunlight and moisture condensation must be prevented.

OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal
protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is
suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.

More about Jaour

Shanghai Jaour attracts a team of experienced elitists in hot melt adhesive industry. The company is specialized in pressure sensitive hot melt adhesive for nonwoven disposables, medicals, industrial tapes & labels, and waterproofing membranes, including the research & development, manufacturing, sales and after-sales services.

The company ’s core value is to deliver high performance and the right products, and full services to meet customer performance requirements. That includes tailored products for customers with rapid response. Our wide product range provides you with versatile choices of adhesive performance in demanding environments.

The corporate business philosophy of “Value-creation, high efficiency and constant enterprise.” supports the company to keep on moving forward actively. Our business team is prepared and ready to serve you, and you can rely on JAOUR to be your consistent and long-term partner in adhesive technology.

FAQ

Q: Are you the factory or trading company?

A: We are professional manufacturer for Hot Melt Glue Since 2006;We have three factories.

Q: What is your Minimum Order Quantity of your Product?

A: Normally the MOQ is 1Ton;

Q: What's your payment term?

A: Normally we do 30% T/T IN ADVANCE, 70% balance before shipment. Other payment terms can be discussed case by case;

Q: What's your after-sales service?

A: Free online technology services 24h hours or engineers are available to serve adhesive application overseas and travel cost will be born by our side;

Q: Where is the factory location?

A: Our head office is in Shanghai and have two branches in Jiangsu province.

Q: How Arrive to the factory?

A: You can arrive to Shanghai Hongqiao Airport or Hongqiao railway station, we will pick up you when you arrive.