Shanghai Jaour Adhesive Products Co.,Ltd
| Payment Terms | L/C, D/A, D/P, T/T |
| Supply Ability | 4000 tons per month |
| Delivery Time | 5-8 work days |
| Packaging Details | 1kg block wrapped with meltable film, 20-25kg/box |
| Product | Hot melt adhesives, hot melt glue production for waterproof coil material |
| Odor | Low to no |
| Strength | High Binding Strength |
| Material | Rubber based |
| Sample | Free and available |
| Lead time | 7-10days |
| Brand Name | Shanghai Jaour |
| Model Number | JM-2036C/2036J/2036L/2036LH |
| Certification | ISO 14000 ISO 9001 ROHS REACH FDA VOC |
| Place of Origin | Shanghai China |
View Detail Information
Explore similar products
Hot melt PSA Pressure Sensitive Adhesive for wooden roof water-proofing
Surgical Dressing Pressure Sensitive Hot Melt Rubber Oil Resistance
Transparent PE / OPP Film Hot Melt Adhesive with Rubber base, Transparent Hot
Hot Melt Rubber Adhesive，Hot Melt Pressure Sensitive Glue for tapes application
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T | Supply Ability | 4000 tons per month |
| Delivery Time | 5-8 work days | Packaging Details | 1kg block wrapped with meltable film, 20-25kg/box |
| Product | Hot melt adhesives, hot melt glue production for waterproof coil material | Odor | Low to no |
| Strength | High Binding Strength | Material | Rubber based |
| Sample | Free and available | Lead time | 7-10days |
| Brand Name | Shanghai Jaour | Model Number | JM-2036C/2036J/2036L/2036LH |
| Certification | ISO 14000 ISO 9001 ROHS REACH FDA VOC | Place of Origin | Shanghai China |
| High Light | hot melt spray adhesive ，low temp hot glue | ||
Hot melt adhesives, hot melt glue production for waterproof coil material
DESCRIPTION
The Jaour this kind glue is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed
for high performance product assembly applications where good tack and adhesion are required, such as
waterproofing materials for construction.
SUGGESTED USES
Waterproofing materials assembly for construction, or other pressure sensitive adhesive applications that high
tack , peel and flexibility are required.
TYPICAL PROPERTIES
Appearance : Yellow translucent solid
Color (Gardner) : ≤ G6
Softening Point (R&B) : approx. 100 ℃
Viscosity (Brookfield) :@180 ℃ approx. 5,600 cps
OPERATING GUIDES
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 145 – 175 0 C
for both, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
| Composition | Resin and thermoplastic rubber |
| Gardner Color | ≤ G1 |
| Appearance | Light yellow translucent solid |
| Brookfield Viscosity | 6200 mPa.s at@200°C |
| 10100 mPa.s at@180°C | |
| 19500 mPa.s at@160°C | |
| 43000 mPa.s at@140°C | |
| Softening point | Approx. 101°C |
| Application Instruction | 1. Suggested operation temperature: 150°C-180°C. |
| 2. Application methods : slot or roll coating. | |
| 3. Substrates, release paper and application environment will affect its adhesion performance, so trial use is recommended. | |
| 4. There should be no dust and oil on substrates and release paper. Substrates should be well conditioned under standard temperature and humidity | |
| Package | 6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. |
| Storage | The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented. |
PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35 ℃ and above 5 ℃
Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal
protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is
suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
FAQ
Q: Are you the factory or trading company?
A: We are professional manufacturer for Hot Melt Glue Since 2006;We have three factories.
Q: What is your Minimum Order Quantity of your Product?
A: Normally the MOQ is 1Ton;
Q: What's your payment term?
A: Normally we do 30% T/T IN ADVANCE, 70% balance before shipment. Other payment terms can be discussed case by case;
Q: What's your after-sales service?
A: Free online technology services 24h hours or engineers are available to serve adhesive application overseas and travel cost will be born by our side;
Q: Where is the factory location?
A: Our head office is in Shanghai and have two branches in Jiangsu province.
Q: How Arrive to the factory?
A: You can arrive to Shanghai Hongqiao Airport or Hongqiao railway station, we will pick up you when you arrive.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Seller
Year Established:
2006
Total Annual:
400 million-450 million
Employee Number:
200~260
Ecer Certification：
Verified Supplier
Shanghai Jaour attracts a team of experienced elitists in hot melt adhesive industry. The company is specialized in pressure sensitive hot melt adhesive for nonwoven disposables, medicals, industrial tapes & labels, and waterproofing membranes, including the research & development,... Shanghai Jaour attracts a team of experienced elitists in hot melt adhesive industry. The company is specialized in pressure sensitive hot melt adhesive for nonwoven disposables, medicals, industrial tapes & labels, and waterproofing membranes, including the research & development,...
Get in touch with us
Leave a Message, we will call you back quickly!