Semi - Automatic 1L Drinking Liquid Water Bottle Filling Machine / Bottling

Product Specification

Semi - Automatic 1L Drinking Liquid Water Bottle Filling Machine / Bottling Packing Line

Video Link in Youtube: Please go to download:  Video link in youtube.pdf

Description

1. Adaptability is wide: because all parts have a height adjust device.

2. Production capacity can be adjusted continuously: using a frequency inverter to control the speed.

3. So it works more reliable.

4. This machine has a complete set of reliable protection system to protect the machine itself and the operator.

5. Compare with similar type of machine, it has following performances:

a. More compact in structure, more beautiful in appearance

b. The structure of bottle rinsing clamp is more delicate

c. Screw head uses magnetic parts

Bottle Rinsing Machine

The CFG12-12-1 is designed to effectively internally rinse up to 3,000 small bottles per hour/50 bottles per minute. It's ideal for rinsing bottles ranging in size from 12 oz (300ml) up to 2 liters. The change over from one size bottle to another couldn't be easier. It takes literally minutes and no tools are required nor are there any special molds or adapters required for the change overs. The stainless steel construction ensures years of a long and durable life for the system and since there are a minimum of moving parts maintenance to keep the system operating and maximum efficiency is a snap.

Water Filling Machine

The CFG12-12-1 is designed to automatically fill up to 3,000 bottles per hour and provides maximum versatility to keep pace with the demands of your operation. The CFG12-12-1 is designed and built to operate multiple shifts with a minimum of the maintenance and does not require highly skilled operators. The state-of-the-art design and components offer maximum performance, reliability and versatility to fill from 330ml up to 2L bottle. The main 24foot conveyor automatically moves the pre-labeled bottle to the Rinser , then on to the Filler, the further down the track for manual cap application and for final cap tightening by the CFG12-12-1 Cap tightner.

Bottle Capping Machine

The CFG12-12-1 is also one of the most unique capping systems available. To begin with, the filled bottles first enter the build-in Bottles Spacing Mechanism. The bottles spacer allows for precise and constant bottle spacing while entering the Cap Applier. This correct spaceing ensures that your caps are applied evenly and consistently with the most accurate alignment possible. In preparation for cap application, caps are first moved, from the shipping carton, into the Cap Hopper. The Cap Hopper is located at approximately 48" above floor level for easy loading. After the caps have been moved into the hopper, they are elevated to the upper level "Cap Disbursement Chute".

NOTE:

Make It Easy To Start Bottled Water Business.

1. Supply Completely Bottled Water Plant Machinery;
2. Supply Bottled Water Materials Like PET Preform, Bottle Cap and Label, Packing Roll PE Film;
3. Bottle Design For Choice, Free Drawing Factory Layout.

4. Oversea Installation.(80 USD Per Day)

Production line

1)water purification system
Source water tank →Source water pump→ Quartz sand filter→ Active carbon filter→ Ion soften machine→ Fine filter →Reverse Osmosis → Ozone sterilizer → pure water tank

2)Bottle filling & packing system
Pure water tank→Bottle blower→Air conveyor →Washing, filling & capping 3-in-1→ Light check → Full-automatic labeling machine → Ink jet machine →Full automatic PE film packing machine→ warehouse

3).Bottle making system
PET preform→Autoloader→reh