Carbonated Drink / Beer Tunnel Pasteurization Equipment For Bottled Beverage

Product Specification

Carbonated Drink / Hot Juice / Beer Pasteurizer Tunnel Machine For Bottled Beverage Production Line​

General Description

Function 1

Spraying Water Cooling Tunnel for Hot Filling Bottled Juice (PL-1) adopts a three section cooling water recycling cooling design. The first section uses water at 85-65 degrees Celsius. The second part is at 50-35 degrees Celsius, and the third part adopts aseptic water spray. The outlet bottle temperature is below 35-40 degrees Celsius.

Function 2

Due to the low temperature filling (4 degree), while the normal temperature is higher than in such an environment, the water in the air is easily condensed in the outer surface of the bottle, which causes inconvenience to the labeling and wrapping.

Bottle warming machine is tunnel-type spray equipment, spray water through the circulation of heat exchanger, divided to three temperature zones (which can also design more zones), to be increased to room temperature(30-35degree).

Running video for ref

Working principle

1, The inverter puts needle reducer and drives initiative square axles rotate through roller chain. The sprocket on the square axle drives the chain board of plastic to be moved, form the board organization of the chain. The in-feed bottle comes into the hot water area, and is arranged orderly, warming the bottle by hot water heated by steam.

2, Section I is the rising temperature by hot water, the temperature controlling precision is ± 2. When the water comes to regulated level, the water flows out of overfall. Section II is the permanent temperature of hot water. The hot water feeds into the launching trough, while the level of troughs is lower than the liquid level, the water circulation is supplied water supply. When the water comes to regulated level, the water flows out of the overfall.
 

3, Section III is the spraying device of pure water, in order to keep the anhydrous mark of appearance after the cooled bottle dry.
 

4, Under the automatic condition, all of pumps run automatically, protected by low liquid level. Low liquid level can postpone a certain second(it is can designed in local).
 

5, No matter what it is manually or automatically controlling, the steam metering needle would work, under the condition of Trough No. 1 and No. 2 start-up; It shuts off up to the designed temperature, and the steam metering needle turns off; It turns on, while it is lower than the designed temperature.

Machine configurations

Process of juice production line

1) water purification system

Source water tank → Source water pump → Quartz sand filter → Active carbon filter → Ion soften machine → Fine filter → Reverse Osmosis → Ozone sterilizer → pure water tank

2) Juice processing system

1 High-shear emulsifying tank + Plate heat exchanger
2 Mixing tank
3 UHT sterilizer + homogenizer machine + Buffer tank
4 Hot water system + Hot water tank
5 CIP cleaning system

3) Bottle filling & packing system

Pure water tank→Bottle blower→Air conveyor →Washing, filling & capping 3-in-1→ Light check → Full-automatic labeling machine → Ink jet machine →Full automatic PE film packing machine→ warehouse

4) Bottle making system

PET preform → Autoloader → reheater  → molding → bottles

Customized service

We can design the machines according your requirements(material,power,filling type,the kinds of the bottles,and so on),at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.

After-sales service

1. We will delivery the machine and provide the bill of load on time to make sure you can get the machine quickly
2. When you finish the Preparation conditions,our fast and professional aftersales service engineer team will go to your factory to install the machine,give you the operating manual,and train your employee until they can operate the machine well.
3. We often ask feedback and offer help to our customer whose machine have been used in their factory for some time.
4. We provide one year warranty
5. Well-trained & experienced staff are to answer all your inquiries in English and Chinese
6. 24 hours for engineer response (all services part 5days in customer hand by Intl' courier).
7. 12 Months guarantee and life-long technical support.
8. Your business relationship with us will be confidential to any third party.
9. Good after-sale service offered, please get back to us if you got any questions.

Quality Control

We have separate quality control department, which make sure the raw materials are qualified,also ensure the machine running smoothly.
If you want to know more information about the product,Send inquiry to us, we will solve any of your problems and send you running video for reference.

> . > . > WELCOME TO VISIT MY FACTORY < . < . <

Contact: Vickie Sun

Email: sunpiu2012@gmail.com

Skype: vickiesunqiu

MOB (whatsapp): 0086 13584426100