Hotdisplay Technology Co.Ltd
| Payment Terms | L/C, D/A, T/T, D/P, Western Union, MoneyGram |
| Supply Ability | 99999 |
| Delivery Time | 25 days |
| Product Type | TFT Landscape |
| Display Content | 800x480 |
| Dimensions (mm) | 105.5x67.2x2.95 |
| Viewport Window Size | 4.3" |
| Effective size (mm) | 95.040x53.856 |
| Special Instructions | with RTP |
| Brand Name | HOTHMI |
| Model Number | TFT-H043A12SVILT4R40 |
| Place of Origin | dongguan,China |
View Detail Information
Explore similar products
LCM TFT OLED Custom Display Solutions Anti Glare Anti Reflective
Custom STN 8X2 Character LCD Display Yellow Green 16PIN Standard COB
1.3 Inch TFT SPI LCD Custom Display Solutions 240x240 Square
Electronic Tobacco LCD Display Module , HTM68228 Custom TFT Display
Product Specification
| Payment Terms | L/C, D/A, T/T, D/P, Western Union, MoneyGram | Supply Ability | 99999 |
| Delivery Time | 25 days | Product Type | TFT Landscape |
| Display Content | 800x480 | Dimensions (mm) | 105.5x67.2x2.95 |
| Viewport Window Size | 4.3" | Effective size (mm) | 95.040x53.856 |
| Special Instructions | with RTP | Brand Name | HOTHMI |
| Model Number | TFT-H043A12SVILT4R40 | Place of Origin | dongguan,China |
| High Light | 4.3 Inch Custom Display Solutions ，Resistive Custom Display Solutions ，800x480 Resistive Touch Panel | ||
4.3 Inch TFT LCD Display/Resistive Touch Panel/800x480 Dots/TFT-H043A12SVILT4R40
Product parameters
Display Size - 4.3"
Product Application - Instrumentation
Perspective - Full Perspective
Backlight type or brightness - 400cd/m2
Connection method PIN number - FPC-40PIN
Interface - MCU 8/16 Bit
Operating temperature - (-20~70℃)
Supply Voltage - 3.3V
Driver IC Model - ST7262
General Feature:
| Item | Standard Value | Unit |
| Display Size | 4.3 | Inch |
| Number of Pixels | 800(H)*3(RGB)* 480(V) | dots |
| Active Area | 95.040(H)* 53.856(V) | mm |
| Outline Dimension | 105.42(H) * 67.07(V) * 4.20(D) <TFT+RTP> | mm |
| Viewing Direction | Full O'clock | - |
| TFT Interface | MCU 8 bit/SPI/I2C | - |
| TFT Driver IC | ST7262+HT7381 | - |
| TFT Driver Condition | VCI=3.3V(Typ) | V |
| Backlight-1 | White LED/10 PCS/5 LEDs in series, 2 in parallel | - |
| Touch Panel | With RTP | - |
| CTP Driver IC | - | |
| CTP Driver Condition | VDD=3.3V(Typ) | V |
| Operation Temperature | -30 ～ 80 | ℃ |
| Storage Temperature | -30 ～ 85 | ℃ |
TFT Pin Description
| Pin NO. | Symbol | Description |
| 1～2 | LEDK | LED Cathode |
| 3～4 | LEDA | LED Anode |
| 5～6 | GND | Ground |
| 7～8 | VCI | Digital Power |
| 9～11 | PSM[2～0] | MCU interface settings. |
|
12 |
RESX | Reset input signal When RESX = 0 and maintain the length of 256 clock cycles, chip will generate a reset action. |
|
13 |
CS | Chip select signal. If the MCU interface is set to the serial mode, this pin can be set to GPIB [0], internal pull-up resistor. |
|
14 |
RD | Read control signals. In parallel mode of 8080, this pin is RD# signal, RD#=0, which means MCU reads data or status read cycle to the chip. In the 6800 parallel mode, this pin is the EN signal, EN=1, indicating that the MCU's control of the chip is in the enable cycle. If the MCU interface is set to serial mode, this pin can be set to GPIB[1] with an internal pull-up resistor. |
|
15 |
WR | write control signal In 8080 parallel port mode, this pin is the WR# signal, WR# = 0, representing the MCU A command write or data write cycle is performed on the chip. In 6800 parallel port mode, this pin is RW# signal, RW# = 1, representing MCU Data read or status read cycle is performed on the chip. RW# = 0, representing The MCU performs a command write or data write cycle to the chip. If the MCU interface is set to serial mode, this pin can be set to GPIB[2],There are internal pull-up resistors. |
|
16 |
RS/A0 | command or data select signal A0 = 0, which means that the MCU reads the status of the chip or the command write cycle. A0 = 1, which means the MCU reads or writes data to the chip. |
|
17 |
WAIT | waiting for output signal When the MCU reads and writes the chip, if the chip is busy, it turns WAIT into a low level to notify the MCU to enter the waiting period. |
|
18～25 |
DB[0～7] |
|
| 26～33 | NC | Not Connect |
|
34 |
INT | Interrupt output signal When the set interrupt condition occurs, this pin becomes a low level, which is used to generate an interrupt output to inform the MCU. |
| 35 | NC | Not Connect |
| 36 | GND | Ground |
| 37 | RTP_XR | Resistive TP function pin,If not used, let this pin open. |
| 38 | RTP_YD | Resistive TP function pin,If not used, let this pin open. |
| 39 | RTP_XL | Resistive TP function pin,If not used, let this pin open. |
| 40 | RTP_YU | Resistive TP function pin,If not used, let this pin open. |
Company Details
Business Type:
Manufacturer
Year Established:
2004
Total Annual:
500-700
Employee Number:
50~100
Ecer Certification：
Site Member
Company Profile A reliable LCD display manufacturer, designer and supplier, HOTDISPLAY Technology Co.Ltd has been serving many industries since 2004. We manufacture LCD modules including monochrome TN STN FSTN LCM, COG LCD, TFT LCD display, TFT color LCD, graphic LCD module an... Company Profile A reliable LCD display manufacturer, designer and supplier, HOTDISPLAY Technology Co.Ltd has been serving many industries since 2004. We manufacture LCD modules including monochrome TN STN FSTN LCM, COG LCD, TFT LCD display, TFT color LCD, graphic LCD module an...
Get in touch with us
Leave a Message, we will call you back quickly!