Stainless Steel 304 Custom Metal Grates , Bearing Bar Trench Grate Covers

Product Specification

Stainless Steel 304 316 304L 316L Steel Bar Grating for Drain or Trench Cover

Description:

Stainless Steel Bar Grating is manufactured from alloy types 304, 304L, 316, or 316L and available in grating types "WS" (welded stainless), "DTS" (dovetail stainless pressure locked), and "SLS" (swage locked stainless). Popular for highly corrosive environments and long-lasting architectural applications, stainless steel bar gratings are available with bearing bar spacing ranging from 19/16" (1-3/16") to 7/16" on center and with cross bars at 4" or 2" on center. Each product is available with standard plain or optional serrated or Algrip surfaces. Finish options are diverse and should be carefully considered.

As produced, stainless steel products typically display discoloration caused by the introduction of heat during welding, cutting, or grinding processes. If appearance is important to your application, consideration should be given to secondary cleaning or electro-polishing.

1. Mill Finish

Products will display discoloration from welding, cutting, and grinding. Satisfactory for industrial or process applications where appearance is not a consideration.

2. Commercial Clean

A uniform, matte finish is achieved by abrasive blasting followed by passivation to remove manufacturing contaminants.

3. Electro-polished

A bright, chrome-like appearance achieved by immersion in chemicals that clean and “polish” the base metal.

Bearing Bars – Load carrying main elements made from steel, aluminum, or stainless steel, extending in the direction of the grating span.

Bearing Bar Centers – The distance center-to-center of the bearing bars.

Carriers – Flats or angles which are welded to the grating panel and nosing of a stair tread and are bolted to a stair stringer to support the tread.

Clear Opening – The distance between faces of bearing bars in rectangular gratings, or between a bent connecting bar and a bearing bar in a riveted grating.

Cross Bars – The connecting bars which extend across the bearing bars, usually perpendicular to them. They may be bent into a corrugated or sinuous pattern and, where they intersect the bearing bars, are welded, forged or mechanically locked to them.

Cross Bar Centers – The distance center-to-center of the cross bars.

1. Bearing Bar (Load Bar) Specifications (mm):
The specification of plain type and serrated type bearing bar is 25 x 3 to 100 x 8; The specification of I-section type is 25 x 5 x 3, 32 x 5 x 3, 38 x 5 x 3, 40 x 5 x 3, 50 x 5 x 3, 50 x 7 x 4, 55 x 7 x 4, 60 x 7 x 4, 65 x 7 x 4, 70 x 7 x 4, 75 x 7 x 4, etc.

2. Bearing Bar Pitch (center to center):
12.5, 25, 30, 30.16, 32.5, 34, 40, 41.25, 45, 50, 60, 60.32, 80, 100 mm etc, also be according to client's requirement and 30, 40, 60mm are recommended, America standard is available <1'' x 3/16'', 1 1/4'' x 3/16'', 1-1/2'' x 3/16'', 1'' x 1/4'', 1-1/4'' x 1/4'', 1 1/2'' x 1/4''(19-w-4) and so on. >

3. Material:
Mild Steel (Low Carbon Steel) or Stainless Steel

4. Steel grating standards:
A) China: YB/T4001-1998
B) USA: ANSI/NAAMM (MBG531-88)
C) UK: BS4592-1987
D) Australia: AS1657-1985
E) Japan: JJS

Grating Standardizations:

steel grating specification- Grating Metal galvanized grating
panel size available(black grating): 1000x5800mm or 1000x6000mm ,7315*1000mm
 

Steel grating advantage

The products enjoy the features of high strength, light structure, high bearing, convenience for loading and other properties. 

Products Picture;