Small Stainless Steel Magnetite Iron Removed Swimming Pool / Shower Water

Product Specification

Small Stainless Steel Magnetite Iron Removed Swimming Pool / Shower Water Filtration System

>Reverse osmosis is an equipment to purify the saltine water with the action of pressure difference of semi permeable membrane. RO is also effective with asbestos, many taste, colour and odour producing chemicas, particulates, total dissolved solids, turbidity and radium. RO system is widely used in water supply treatment, purification for tap water, seawater and brackish water, pure water and ultra-pure drinking water production, power stations, electronic industries, medicine manufactories, and medical treatment. It is key equipment of pure water plant.

At initial status, both of the the  and ‚ are full, and tƒ is empty, after sometime for using of fluxing solution and it needs treatment, open “pump 2”, at this time the fluxing solution in ƒis pumped into , when it is full, the fluxing solution overflow into ‚through overflow pipe, when the ‚is full, “pump 2 “can be closed, then blow the fluxing solution in ‚, add air and chemicals, leave it calm for sometime, open “pump 1”, fluxing solution in treating tank ‚is pumped into pressure filter by “pump 1”, after filter it flows into transition tankƒ, the precipitation is carried out of factory, this process is repeated, which can achieve fluxing recycling and regeneration.

> Features:

1. Automatic backwash and manual backwash

2. Automatic switch on when low water level, and switch off when high water level

3. Water shortage protection for multi-stage pump

4. Protection when no voltage, under-voltage, over-current, short circuit and creepage

5. Full stainless steel structure, durable and easy to clean.

6. Integrating water flow indicator, conductivity indicator, pressure indicator, control panel

7. China Top Brand or world famous brand electrical, switch and valve systems

8. Core components of RO system are imported, USA Filmtec Dow membranes

9. Run and produce water continuously, high degree automation

Technological process

Pickling——Rinsing——Fluxing——Dring——Galvanizing——Cooling——Passivation

If the flux not treated before hot galvanizing , the Fe2+ and HCl solution will attached to the workpiece surface, and then put into zinc tank with workpiece together, it will not only affect the galvanizing quality but also increase the zinc consumption, produce a large number of zinc slag(zincilate), zinc ash and zinc powder, this result in the galvanizing quality declined.so it is necessary to remove Fe2+ and HCl from the flux.

Fluxing is a process before galvanizing.

After rinsing put the black workpieces into the fluxing tank, keep them in ZnCI₂—NH₄CL double salt aqueous solution about 0.5～1min, heating to keep the temperature during 50～70℃.

Zinc ash is mainly composed of ZnO, Zn and metal chloride etc..

Per 1kg zinc ash contains Zinc >800g .

Zinc consumption that caused by ash occupied 20〜30% of total amount of zinc.