17.5*9.5cm Medical Consumable Products , 98 BFE 3 Ply Face Mask

Product Specification

Medical Consumable Item Disposable Medical Face Mask 3 Ply Flat Type

Contraindications
 

People with allergies to materials are prohibited from using

Matters needing attention, warning
 

1. This product is a disposable medical product;
2. Do not use after expiration;
3. The use of damaged packaging is prohibited;
4. Check the tightness before each wearing;
5. Replace the mask in time when it is wet;
6. Dispose of the product as medical waste after use;
7. The product should be used as soon as possible after opening;
8. It is suitable for medical environment with non-protective isolation requirements, medical environment without special purification requirements, and is not suitable for aseptic operation.

Storage and transportation conditions
 

Store at room temperature, relative humidity no more than 80%, no corrosive gas and well ventilated room. The means of transportation should be clean and hygienic, and the fire source should be isolated.

Scope of application
 

Various clinical personnel wear it during non-invasive operations, covering the mouth, nose and jaw of the user, and providing a certain physical barrier to prevent the direct penetration of pathogenic microorganisms and particles.

Instructions
 

1. Check whether the packaging is in good condition before use, and confirm the packaging mark and production date, and use it within the validity period.
2. When using, open the package, put the mask with the nose clip side up, the blue side outwards, and the white side inwards, gently pull the ear straps to hang the mask on both ears; when wearing the mask, avoid touching the inside of the mask with your hands. Prevent degradation; wash hands before wearing the mask and before and after removing the mask.
3. Gently press the nose clip to make it fit the bridge of the nose, bend and adjust the nose clip, then press the nose clip, and pull the lower end of the mask to the lower jaw;
4. Arrange the wearing position of the mask so that it covers the entire face, and check the tightness of the edges to obtain the best protection effect. When removing the mask, try to avoid touching the outer part of the mask.

Main Performance

Company Information

Jinan K-Flying Technology Co.,Ltd was established in 2009.The company has strong technical force, modern professional production management unit and advanced production equipment. With years of professional experience accumulation, it continuously optimizes product upgrades and innovations, improves product quality and service quality, and enables the company to grow healthily and rapidly. The products are well received and trusted by domestic and foreign customers, and the products are sold well all over the country and exported to many countries.

Our factory is located in Chaozhou City,Guangdong Province,two hours' drive from Guangzhou City,near the Shantou Port,Shenzhen Port.Our main products include:Medical hospital nursing beds,Hospital medical trolley cart,Operation Tables,Shadowless Operating Lamp and Other Medical Equipment products like Mattress/waiting chair and hospital bedside cablinets etc.Besides,according to your specific requirements,the OEM service could be offered.

We always insist on the aim: Competition and initial,quality first, customers supreme and maintenance of prestige. We will continue to provide the best products and perfect service to our clients