Sugar cane juicer 1 ton sugar cane juice extractor machines sugar cane mill

 Product advantages:

1.Use a deceleration motor,The reduction motor wave box is precise in processing,
the transmission efficiency is over 98%, and the power consumption of the whole
mechanical and electrical power is greatly saved.The structure is more compact and
the equipment is lighter.

2.Double bearing double seal design, can not let the juice contact bearings, as far as
possible to reduce the possibility of contact between the design of double bearing
double sealing of the products, each bearing a double seal assembly, and each bearing
assembly 2 bearing double insurance, greatly improve the reliability. Three rollers are
different, three kinds of division of labor, three roller surface treatment using 3
processes, respectively, split, pull, rolling three different processing effect. Split a roll
into several pieces of sugarcane, which can avoid the machine, second roller when
squeezed more dry; pull the pattern of a roller to pull the cane, cane smoothly dragged
into the roller pattern; third rollers are shallow lines of sugarcane for the final press,
this product squeeze the juice rate as high as 80%.

Operation instructions:

1.Before use should check the machine, remove the dirt inside the machine, the gear
and the oil cup add lubricating oil.
2.Determine the diesel engine or power supply and the use of the requirements of the
machine, to determine the correct direction of rotation.
3.First start the sugarcane machine, run for 1 minutes, until the machine running
properly, then add sugar cane.

Safety instructions:
1.Cleaning, maintenance, moving the machine, we must cut off the power supply.
2.Wet hands can not contact the plug, the beginning of careful electric shock.
3.The use of this product, not to allow children to approach.
4.Please put the machine in a smooth place to use.
5. Do not touch the running parts of the machine by hand.
6.Such as in the use of the process of failure, should immediately shut down the
power supply, stop using, for inspection.
7.Such as product failure, in order to avoid danger, please don't open repair, please
promptly with our company or local dealer contact.
8.Pay attention to the switch of the positive and negative direction signs, prohibit the
fingers into the body.
9.Not the nails, needles and other metal objects into the machine is running, so as not
to damage parts.

1.Help you choose the most suitable machine.

2.Do design for you according to your request.

3.Supply machine information explain and show video for you

4.Normally the service life of our machines can be 5-8 years.

5.We offer full set of easy-spoiled spare parts and tools for back up.

6.We can send our engineer abroad to training you how to operate the machine

7.We can provid service in 24hours on line

We are a manufacture to export and import for Machinery from 1990 to today,and have more than 10agents office in Nigeria ,Vietnam, Mongolia, Russia, Tanzania, and so on and every month have more than 10continer export , and your satisfied is our best service , welcome join us .

Frequently Asked Question

1.Q:Are you a factory or trading company?
A:Our factory founded in 1990 ,and our export and import department founded in 2006 .

2.Q:Where's your factory located? How can i visit there?
A:Our factory is located in Zhengzhou city,Henan province,China,about 2 hours by fly from Guangzhou. here have more stock and machine for your test , welcome to vist us!!

3.Q:What's quality of your machinery ?
A:Our machine is international standard ,every machine make be from spare parts,painting ,test ,adjust and packing department ,so all step is be carefull ,and we also can according to your requested to design to make it ,and here have the enginner can go abroad for installed for you .

4.Q:How does your factory do regarding quality control?
A:We have the person check the machine from beginning to end.Our factory has gained BV,Intertek,SGS authentication.

5.Q:What is your payment terms?
A:30%T/T in advance,70% before shipping .or IRREVOCABLE L/C.

6.Q:What is your lead time?
A:With 3-10days after receiving deposit or original L/C.

Contact Information of Sugar cane juicer 1 ton sugar cane juice extractor machines sugar cane mill