Ypg Nozzel Pressure 25kg/H Industrial Spray Dryer

Product Specification

YPG Nozzel Pressure Cooling Spray Dryer Drying Machine Industrial Drying Machine

YPG Model Nozzle Pressure Spray Dryer

1, YPG model spray dryer/ pressure spray dryer /nozzle spray dryer

2, Liquid or slurry drying processor

3, Easy operation and control

4, Stainless steel

Principle

The working of the pressure spray dryer as follows:

the liquid of raw material is pumped in through diaphragm pump. The liquid of raw material can be atomized into tiny droplets. Then it gathers with hot air and falls off. Most parts of powder material will be collected from the the outlet of the main tower bottom . for the fine powder , we will still continuously collect them by the cyclone separator and cloth bag filter or water scrupper . but it should depend on the material property .

For the pressure spray dryer , it simply has bellow system :

1. Air inlet system it consists of air filter (such as Pre&post filter&Sub-high efficiency filter and high efficiency filter) , air heater (such as electrical heater ,steam radiator ,gas furnace and so on ) draft fan and relative air inlet duct .
2. Liquid delivery system it consists of diagraph pump or screw pump ,material stirring tank and relative pipe .
3. Atomizing system : pressure pump with inverter
4. Main tower. it consists of the conical sections , straight sections , air hammer , lighting device , manhole and so on .
5. Material collecting system. it consists of cyclone separator and cloth bag filter or water scraper .this parts should be equipped based on customer needs .
6. Air outlet system . it consists of suction fan ,air outlet duct and post filter or High efficiency filter.(for the filter chose , it is based on the customer request.)

The tower body, pipes and separator of set where will contact with the product are made of AISISUS304 or AISISUS304L or AISISUS316L or AISISUS316. There is enough layer of heat preservation between inner and outer case of the drying tower body. The filled material is fine glass cotton. The tower body we also equipped with observation door, sight glass, lamp-house and control meters and instruments that is controlled and displayed through electric control panel.

The air steam contains dust goes to low box through air inlet.Some dust deposits.When light particle dust floats,it is blocked in the bag.The purified air penetrates the filtrating bag and passes into the up box through venture tube and exhausts from outlet.The accumulated powder dust on filtering bag will be collected.

Main Application:

The equipment is widely applied for ventilation and dedusting and recovering powder dust of metallurgy industry,casting industry,mine,chemical industry pharmaceutical industry,construction material industry,feedstuff and grain process industry.

Nowadays, Changzhou Jiasheng Machinery Co.,Ltd has customers both in China and abroad.Foreign customers such as Russian,East Europe,Middle East,South America,North America,East Asia,Southeast Asia, Africa,etc.

Applications

The machine is drying materials for food industry,medicine,plastics and resin,detergent,chemical industry.

Nowadays, Changzhou Jiasheng Machinery Co.,Ltd has customers both in China and abroad.Foreign customers such as Russian,East Europe,Middle East,South America,North America,East Asia,Southeast Asia, Africa,etc.

FAQ

Q: How can I visit your factory?
A: Our company is in Changzhou city, and it is very near Shanghai city. It takes about 1 hour to get to Changchou. Or we can even visit you in Shnghai.

Q: What’s the quality of your products?
A: Our products come with best quality, and passed CE certification. And exported to lots countries around the world, such as Australia, Malaysia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured with the quality absolutely.

Q: What to do if the machine has a problem?
A: 24 hours timely response of mail and phone calls. If the parts broken belong to non-artificial factors within 12 months, we offer free replacement. If beyond 12 months, customers should bear the freight back and forth and accessories cost.

Q: How long is the warranty of your equipment?
A: One year.

Q: What is your payment term?
A: Our usual payment term is: 30% TT in advance, 70% TT before shipment. Other ways can also be received after we both sides discussion and agreement.

Q: Does your price include freight?
A: Our usual price is based on FOB Shanghai. If you request CIF, please give us your delivery port, and we will give you CIF price.