Wuxi Octetally Tech Co., Ltd
| Packaging Details | WOODEN PALLET |
| Delivery Time | 10-15 DAYS |
| Payment Terms | L/C, T/T |
| Supply Ability | 100SETS/MONTH |
| Place of Origin | PR.CHINA |
| Brand Name | OTA |
| Certification | CE, ISO |
View Detail Information
Explore similar products
Flame Cutting Machine ZG Strip Cutting Machine Cut Longitudinal And Transverse
H Beam Automatic CO2 Assembly Machine Hydraulic System With High Strength And
H Beam Gantry Welding Machine / Arc Gantry Welder
Cantilever H Beam Welding Machine Electrical Control System
Product Specification
| Packaging Details | WOODEN PALLET | Delivery Time | 10-15 DAYS |
| Payment Terms | L/C, T/T | Supply Ability | 100SETS/MONTH |
| Place of Origin | PR.CHINA | Brand Name | OTA |
| Certification | CE, ISO | ||
| High Light | integrated h beam welding machine ，h beam welding machine arc ，phj h beam straightening machine | ||
PHJ Integrated H beam Welding machine is a high efficient equipment for producing H beam. The assembling, submerged arc welding and straightening can be finished on one machine. It process beam at I position and is suitable for light H beam with fillet size less than 8mm.
The model has light duty and heavy duty for options.
Model: PHJ-15
- Flange thickness T:6-25mm
- Flange width B:200-800mm
- Web thickness A:4-40mm
- Web height H:200-1500mm
- Beam length L:4000-15000mm
- Welding method: flat SAW (single wire)
- Max fillet height: 8mm
- Input conveyor: total 12m, three pieces, one of them is driver
- Output conveyor: total 12m, two of them are elevated
- Main motor: 7.5kW
- Working speed: 0.2-2m/min
- Conveyor motor: 0.75kWx2
- Welding power: Lincoln PP-1000
- flux recycler: ZH-100(3kWx2)
- Hydraulic system motor: 5.5kW
- Rated working pressure: 6-8Mpa
- Max system pressure: 10Mpa
Assembly part:
There are four sets of centering and location fixtures, synchronized working, adjusted by hand wheel, centered by lead screw and clamped by hydraulic cylinder.
There is initial centering hand at input conveyor end. When the flange and web is lifted into the main body, it center the plates primarily, and supports the web from tilting over.
There is one set of manual centering fixture for flange at output conveyor end, to stable the center by adjusting it.
There is align block at input side, to align the web and flange.
-Welding part:
One set of welding torch on both side to weld the I beam at flat fillet at the same time.
Welding power is CHENGDU HUAYUAN MZ-1000 with automatic wire feeder.
Two sets of automatic flux recycling system. Flux is feed to seam automatically, and there is suck mouth after the torch to recycle the flux for repeat using.
Welding speed is variable by inverter. The user can decide reasonable speed freely.
-Straightening part:
The H beam will have deformation after welding. Use the straightening part, the beam can be straightened.
The upper roll can give suitable pressure through the hydraulic cylinder according to the flange thickness and deformation.
All rolls are made by qualified alloyed metal and heat treated to avoid defects, to assure the stability and long life.
Straightening speed is same as assembly speed, driven by one motor and gear box, controlled by inverter.
There is hydraulic elevated conveyor. It can elevate according to the deformation, to support the beam completing assembly, welding and straightening.
The process is controlled by MITSUBISHI PLC. Driven motor is controlled by AC inverter. There is fine filter for hydraulic system which can give long life to electromagnetic valve.
The straightening part is working to reduce the deformation when welding at cross section.
| Model | PHJ15 | PHJ18 | PHJ20 |
| Flange thickness | 6-25mm | 6-25mm | 6-25mm |
| Flange width | 200-800mm | 200-800mm | 200-800mm |
| Web thickness | 5-20mm | 5-20mm | 5-20mm |
| Web height | 200-1500mm | 200-1800mm | 200-2000mm |
| Beam length | 4000-15000mm | 4000-15000mm | 4000-15000mm |
| Model | PHJ15-HD | PHJ18-HD | PHJ20 |
| Flange thickness | 6-40mm | 6-40mm | 6-40mm |
| Flange width | 200-1000mm | 200-1000mm | 200-1000mm |
| Web thickness | 5-28mm | 5-28mm | 5-28mm |
| Web height | 200-1500mm | 200-1800mm | 200-2000mm |
| Beam length | 4000-15000mm | 4000-15000mm | 4000-15000mm |
Company Details
Year Established:
2005
Total Annual:
2800000-5100000
Employee Number:
150~200
Ecer Certification：
Verified Supplier
We are a professional high-tech company engaged in designing and manufacturing automatic welding equipment, welding robot system, laser machines and material handling equipment. Established in 2005, we are a leading supplier for automatic welding system, covering handheld laser welder, welding ro... We are a professional high-tech company engaged in designing and manufacturing automatic welding equipment, welding robot system, laser machines and material handling equipment. Established in 2005, we are a leading supplier for automatic welding system, covering handheld laser welder, welding ro...
Get in touch with us
Leave a Message, we will call you back quickly!