Shenzhen Greenfair Electronics Co., Limited
| Packaging Details | carton box, plastic blister box |
| core | UU16 R10K |
| windings | two winding |
| inductance value | UU16 - 7mH MIN at 1KHz 0.25V |
| function | EMI/RFI filters |
| wire | 0.55mm copper wire |
| turns | 56 turns REF |
| CLIP | steel |
| varnish | vacuum varnish |
| Brand Name | Greenfair |
| Model Number | UU16 filter |
| Certification | CE, UL, ISO14001 |
| Place of Origin | China |
View Detail Information
Explore similar products
CMC Vertical Type Chip Power Inductor Big Current Two Winding For Power Suply
UU10.5 Power Filter Inductor Vertial Horizontal Common Mode Choke Custom
100V 50Hz Power Filter Inductor Multi - Functional ISO14001 CQC Approved
50 - 400KHz Switching Power Supply Inductor 0.7mm Copper Wire ET20 / 24
Product Specification
| Packaging Details | carton box, plastic blister box | core | UU16 R10K |
| windings | two winding | inductance value | UU16 - 7mH MIN at 1KHz 0.25V |
| function | EMI/RFI filters | wire | 0.55mm copper wire |
| turns | 56 turns REF | CLIP | steel |
| varnish | vacuum varnish | Brand Name | Greenfair |
| Model Number | UU16 filter | Certification | CE, UL, ISO14001 |
| Place of Origin | China | ||
| High Light | chip power inductor ，power through inductor | ||
Line Filter common mode choke UU16 - 7mH Suppresses noise in DC circuits for switching regulators
Function:
1. Suppresses noise in DC circuits for switching regulators.
2. Protects primary AC side form being affected by switching regulators.
3. Filters electors tic noise from power and signal lines.
4. Eliminates contact noise.
5. Filters incoming spike noise for Ics and equipment using microcomputers.
6. Minimizes noise emissions for conforming to FCC,VCCI,FTZ,CISPR,JTTC and VDE.
7. Minimizes noise emissions from inverters.
Parameter:
Operating temperature: -55 to 105°C
Power: 200, 250, 300 and 500W
Voltage: 100V/230, 50Hz
Inductance value is UU16 - 7mH MIN at 1KHz 1V
PF value: greater than 98%
Tested at 100kHz, 0.1Vrms inductance of 10%uH
DC current at which the inductance drops 10% (type) from itsvalue without current
Electrical characteristics at 25°C
Insulation: class B (130°C), class F (155°C), class H(180°C), class N (200°C) and class R (220°C)
Certifications: UL, CQC and CE
Excellent utilization of electricity, good for environment protection
Customized specifications are accepted
| Type | Specification | Inductance Error | Work Frequency |
| ET | ET35 | ±1% | 50-400KHz |
| ET29 | ±1% | 50-400KHz | |
| ET28 | ±1% | 50-400KHz | |
| ET24 | ±1% | 50-400KHz | |
| ET20 | ±1% | 50-400KHz | |
| UIUUUF | UI100 | ±2% | 50-400KHz |
| UI93 | ±2% | 50-400KHz | |
| UI67 | ±2% | 50-400KHz | |
| UF33 | ±2% | 50-400KHz | |
| UF25 | ±2% | 50-400KHz | |
| UF20 | ±2% | 50-400KHz | |
| UYF16 | ±2% | 50-400KHz | |
| UU10.5 | ±2% | 50-400KHz | |
| UU9.8 | ±2% | 50-400KHz |
| WINDING PARAMETER: | |||||||
| WINDING ORDER | MATERIAL SPEC. | S--F | TURNS | WINDING FASHION |
ISOLATION BETWEEN WINDING | ||
| N1 | 2UEW Φ0.55*1P | 1---2 | 56(REF) | CLOSED | |||
| N2 | 2UEW Φ0.55*1P | 4---3 | 56(REF) | CLOSED | |||
| ELECTRICAL CHARACTERISTIC: | ||||||||
| NO. | ITEM | MEASURE POINT | TECHNICAL DATA | REMARK | ||||
| 1 | INDUCTANCE | N1=N2 | 7.08mH MIN | 1KHz/0.25V | ||||
| 2 | HI-POT | N1--N2 | 1.0KVAC | 3mA/5sec | ||||
| 3 | HI-POT | N1,N2--C | 0.5KVAC | 3mA/5sec | ||||
| MATERIAL LIST: | |||||||||
| NO. | MATERIAL NAME | MATERIAL SPEC. | PROVIDER | UL·NO | |||||
| 1 | CORE | UU16 R10K | NANTONG ZHONGXING MAGNETIC INDUSTRIAL CO.,LTD OR EQUIVALENT | ||||||
| 2 | BOBBIN | PHENOLIC | CHANG CHUN | E59481 | |||||
| 3 | WIRE | 2UEW | JIANSU DARTONG QING JIANG M&E CO.LTD OR EQUIVALENT | E237377 | |||||
| 4 | CLIP | UU16 | Shenzhen Shuangmulin Electron Co.,Ltd OR EQUIVALENT | ||||||
| 5 | VARNISH | 8562(a) | HANG CHEUNG OR EQUIVALENT | E200154 | |||||
Notes:
1. Wire:130°C or150°C.
2. The above specifications for the common specifications, customers can request custom design.
General information:
It is recommended that the temperature of the part does not exceed +125°C under worst case conditions.
Storage Temperature: -40°C to 85°C
Operating Temperature: -40°C to 125°C
Test conditions of Electrical Properties: 20°C, 33% RH if not specified differently
| OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT | |||||
| Temperature range | Humidity range | Standard test conditions | |||
| Operating temperature* | Storage temperature | Operating temperature** | Storage temperature** | Operating temperature** | Storage temperature** |
| ( ℃) | ( ℃) | ( % RH) | ( % RH) | ( ℃) | ( % RH) |
| -30 to +120 | -40 to +80 | 10 to +95 | 10 to +95 | 25 ± 10 | 25 to +75 |
* With self-heating
** Maximum wet-bulb temperature 38°C, without dewing
*** Without dewing
Company Details
Business Type:
Manufacturer,Exporter,Trading Company
Year Established:
2006
Total Annual:
2000000-4000000
Employee Number:
100~400
Ecer Certification：
Active Member
Greenfair Electronics is one of the key electric enterprises in Shenzhen., professional in design and manufacture High Frequency Transformer, Power Transformer, Inductors, EMI equipment, SMT Magnetic Components, Network and Telecommunication Transformers, Automotive and Telecommunication Application... Greenfair Electronics is one of the key electric enterprises in Shenzhen., professional in design and manufacture High Frequency Transformer, Power Transformer, Inductors, EMI equipment, SMT Magnetic Components, Network and Telecommunication Transformers, Automotive and Telecommunication Application...
Get in touch with us
Leave a Message, we will call you back quickly!