Shanghai Pullner Filtration Technology Co., Ltd.
| Payment Terms | T/T, Western Union, L/C, D/A, D/P, MoneyGram |
| Supply Ability | 1500 pcs per week |
| Delivery Time | 5 days |
| Packaging Details | Individual packing in carton box after poly bag, then 50pcs per carton. 12 cartons each pallet. |
| OD | 2.7"(68.5 mm) |
| Length | 5"127mm), 10",(254mm)',20"(508mm), 30"(762mm), 40"(1016mm) |
| Material | PP |
| Flow rate | 1.2 m³/h/10" |
| Micron | 0.3μm,0.5μm,1.0μm,3.0μm,5.0μm |
| Connection type | 226/222 |
| Filtration Efficiency | >95% |
| Max working temperature | 80℃ |
| Max forward differential pressure | 4 bar/21℃, 2.4 bar/80℃ |
| Brand Name | PULLNER |
| Model Number | PLM |
| Certification | FDA |
| Place of Origin | Shanghai China |
View Detail Information
Explore similar products
1 - 100 Micron PP Pleated Filter Diameter 2.7" Length 10"/20"/30" Filter
222/226 PP Pleated filters diameter 2.7" Length 10"/20"/30"/40" competitive
Pleated PES Membrane 10 Inch Water Filter Cartridges With 0.2 Micron High
Power Station Condensate Water CPP/CPU Filter Element Iron Remove 70" String
Product Specification
| Payment Terms | T/T, Western Union, L/C, D/A, D/P, MoneyGram | Supply Ability | 1500 pcs per week |
| Delivery Time | 5 days | Packaging Details | Individual packing in carton box after poly bag, then 50pcs per carton. 12 cartons each pallet. |
| OD | 2.7"(68.5 mm) | Length | 5"127mm), 10",(254mm)',20"(508mm), 30"(762mm), 40"(1016mm) |
| Material | PP | Flow rate | 1.2 m³/h/10" |
| Micron | 0.3μm,0.5μm,1.0μm,3.0μm,5.0μm | Connection type | 226/222 |
| Filtration Efficiency | >95% | Max working temperature | 80℃ |
| Max forward differential pressure | 4 bar/21℃, 2.4 bar/80℃ | Brand Name | PULLNER |
| Model Number | PLM | Certification | FDA |
| Place of Origin | Shanghai China | ||
| High Light | 0.3μM pleated polyester filter cartridge ，Microporous pleated polyester filter cartridge ，High Viscosity pleated filter element | ||
Pleated polyester filter cartridge with 0.3μm/0.5μm/1μm/3μm/5μm micron in high viscosity working environment
General Description:
Microporous pleated filter element, the main filter material is : Polypropylene, Hydrophobic PTFE, Hydrophilic PTFE,Polyether sulfone, Nylon, etc.
Most of the raw materials are imported from abroad.Pleated filter element is a kind of deep filtration filter,it is usuaslly used as liquid overheating,clarification, filtration and terminal filter.
It has the following characteristics: the superfine polypropylene fiber membrane as the filtration medium, low pressure differential, high flux, good filtration precision, lower economic cost.
The whole structure of polypropylene, end cover, housing and center pole adopts polypropylene material; It adopts the hot melt welding process, PP and PP melt bonding,without any binder.
It has wide range of chemical compatibility, and also has a series of pore size and form a variety of interface.Material: Pleated filter, Support layer, End-cover, Inside & Outside cylinder are polypropylene.
Welding: It adopts the uniquehot melting methods, no glue, no foreign body fall off.
Typical use: Pharmaceutical, Food, Chemical, Electronics, Environmental protection, etc.
Microporous membrane pleated filter cartridge main features: High interception rate, high liquidity, low pressure differential and a wide range of chemical compatibility;
The production process adopts unique hot melting process technology, no any adhesive, no foreign body release.
It can meet the food,beverage, beer, chemical, pharmaceutical and other industries production requirements.
Specifications:
| Item | Technical Parameters |
| Micron | 0.3μm,0.5μm,1.0μm,3.0μm,5.0μm |
| Filtration area | 0.4-0.7m² |
| Filter Medium | Polypropylene (PP) |
| Support/Drainage | Polypropylene (PP) |
| Core/Cage/End Cap | Polypropylene (PP) |
| Outside diameter | 2.7" (68.5mm) |
| Max. operating differential pressure | ΔP≤0.35MPa at 25℃ |
| Max. operating differential pressure (reverse direction) | ΔP≤0.28MPa at 60℃ |
| Max. operating temperature | 80℃(Stainless steel support is recommended for temperature exceeds 50℃) |
| Sterilization temperature | 30 minute cycles @121℃ |
| Max. operating pressure | 4.0bar/21℃ |
| 2.4bar/80℃ |
Ordering info:
|
Series
| Filter Fineness | Length | Connection Type | Seal Material |
|
PPM
| 0030=0.3μm | 05=5" | C1=226/tripod | E=EPDM |
| PPM |
0050=0.5μm
| 10=10" | C3=222/tripod | S=silicone rubber |
| PPM |
0100=1.0μm
| 20=20" | C5=222/flat head | V=fluororubber |
| PPM |
0300=3.0μm
| 30=30" | C6=226/flat head | P=FEPsleeved |
| PPM |
0500=5.0μm
| 40=40" | C9=the two end |
Products details:
High-quality raw material with precise designs. Pleated material combines deep filtration technology and pleated technology to promising filtration efficiency. Skeleton is using PP material with hollow-caved design, through testing, it meet the requirements of working conditions.
Certificate document:
Our Factory:
FAQ
1. MOQ
As manufacturer, 1 piece is acceptable.
2.Payment Term
Flexible payment method. We can accept L/C, T/T, Western Union, Money Gram, etc.
3.Certification:
We had ISO9001, FDA, certificate, filters test report.
4.Shipping :
Courier service: TNT, DHL, FedEx, UPS, etc.
By sea, by Air, according to customer's request.
5.Sample:
FREE, in 1-3 working days after confirmed.
6. Delivery time:
General 5-10days.
Company Details
Business Type:
Manufacturer
Year Established:
2013
Total Annual:
5,000,000.00-8,000,000.00
Employee Number:
130~150
Ecer Certification：
Verified Supplier
Shanghai Pullner Filtration Technology Co., Ltd. is a well-known enterprise integrating R&D, production and sales of micro membrane filtration equipment and filtration systems. Our Main products: Membrane pleated filter cartridge, High flow filte... Shanghai Pullner Filtration Technology Co., Ltd. is a well-known enterprise integrating R&D, production and sales of micro membrane filtration equipment and filtration systems. Our Main products: Membrane pleated filter cartridge, High flow filte...
Get in touch with us
Leave a Message, we will call you back quickly!