Henan Huanghe explosion proof crane Co., Ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 20 sets per day |
| Delivery Time | 30 days |
| Packaging Details | Packaging Details: By container or Bulk Ship based on principle of keeping package safety and reducing cost. 1.Main electric parts are packed by damp proof wooden case to protect from damage caused by humidity and corrosion; 2.Other parts are packed as sta |
| Lifting capacity | 180t |
| Suitable for bridge span | 35~50m |
| Rated lifting speed of trolley | 1.5m/min |
| Longitudinal travel speed of trolley | 1.5m/min |
| Lateral travel speed of crane | 3.15m/min |
| Speed of bridge crane through hole | 5.5m/min |
| Beam carrying speed of trolley | 6.6m/min (variable frequency adjustable speed) |
| Working altitude | 2000m |
| Working environment humidity | -20°~ +50° |
| Maximum wind power in working environment | Working status level 6 |
| Job level | A3-A5 |
| style | Triangular truss |
| Power Supply | 3-phase 380v-660v |
| Brand Name | Lang Tai |
| Model Number | 40/160 |
| Certification | CE /ISO/GOST |
| Place of Origin | Changyuan, China（mainland） |
View Detail Information
Explore similar products
China Henan good quality bridge laying machine, bridge erecting machine, 160t
JQJ 180t bridge erecting machine, double beam truss bridge erecting machine
JQJ 190t bridge erecting machine, double beam truss bridge erecting machine
Jqjh60 bridge erecting machine, bridge laying machine, gantry crane truss, self
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 20 sets per day |
| Delivery Time | 30 days | Packaging Details | Packaging Details: By container or Bulk Ship based on principle of keeping package safety and reducing cost. 1.Main electric parts are packed by damp proof wooden case to protect from damage caused by humidity and corrosion; 2.Other parts are packed as sta |
| Lifting capacity | 180t | Suitable for bridge span | 35~50m |
| Rated lifting speed of trolley | 1.5m/min | Longitudinal travel speed of trolley | 1.5m/min |
| Lateral travel speed of crane | 3.15m/min | Speed of bridge crane through hole | 5.5m/min |
| Beam carrying speed of trolley | 6.6m/min (variable frequency adjustable speed) | Working altitude | 2000m |
| Working environment humidity | -20°~ +50° | Maximum wind power in working environment | Working status level 6 |
| Job level | A3-A5 | style | Triangular truss |
| Power Supply | 3-phase 380v-660v | Brand Name | Lang Tai |
| Model Number | 40/160 | Certification | CE /ISO/GOST |
| Place of Origin | Changyuan, China（mainland） |
Bridge erecting machine: bridge erecting machine is not only an important construction equipment for bridge erecting, but also a large-scale mechanical equipment. After installation and commissioning, passing through the hole is a step of beam erecting construction, which is also a very important step. Therefore, the bridge erecting machine needs to pay attention to many matters when passing through the hole. Some main matters are listed below for reference.
1. Attention should be paid to the specific conditions of the bridge, such as curve, vertical and horizontal slope and slope, which should be carefully observed and analyzed before passing through the hole. If necessary, actual measurement is needed.
2. In general, the span of the bridge erecting machine is large, and the expansion joints at both ends of the bridge are strong.
3. When going downhill, the front outrigger is long. In addition, it is necessary to pay attention that the telescopic cylinder should not extend too long out of the guide cylinder (the cylinder stroke should not extend too much).
4. When the bridge crane passes through the hole, the front carbonyl is generally slightly higher than the rear carbonyl, and attention should be paid to the completion of the hole, not to stop halfway. The front and middle track beams should be kept horizontal as far as possible. The front outrigger cushion sleeper should not be too close to the edge of the cap beam, leaving a certain space for the beam, and then it should be in the middle. The steel wire rope of the counterweight beam and the hoist must be tightened, but it cannot be lifted off the trolley. It is particularly noted that when going up or down the slope, as the rear support approaches the middle support, the tightness of the steel wire rope must be observed and the hoist adjusted. In short, the steel wire rope must be in a tightened state. When lifting the counterweight beam, it is easy to use the rear crane.
5. The front and rear crown block must be firmly fixed with the main beam, and the bad phenomena such as car sliding and sliding are not allowed. The front outrigger must be crossed and tightened with chain block. The span of the hole is: bridge span + 4m + expansion joint reservation.
In a word, it is very important for the bridge erecting machine to go through the hole when erecting the beam. We must follow the operating procedures and strictly control the safety matters. QJ 180t-40m bridge erecting machine. The bridge erecting machine is a kind of steel structure rail type precast beam hoisting and erection equipment with wide operation range, good performance, convenient operation and safe structure. In the process of erecting the side beam, the bridge erecting machine should be especially careful, the lifting should be stable, the beam should be accurately dropped, and it is not allowed to walk out of the suspended track. The product has the advantages of simple structure, convenient operation and maintenance, good safety and reliability, and can effectively reduce the potential safety hazard.
| Technical parameters and performance table of Bridge Erector | |||||||
| 50m | 40m | 30m | |||||
| model | JQJ200/50 | JQJ180/50 | JQJ160/50 | JQJ140/40 | JQJ120/40 | JQJ100/30 | JQJ80/30 |
| Lifting capacity | 200t | 180t | 160t | 140t | 120t | 100t | 80t |
| Applicable bridge span | 30~50m | 20~40m | 20~30m | ||||
| Applicable maximum gradient | Longitudinal slope £ 5% cross slope £ 5% | ||||||
| Trolley lifting speed | 0.40m/min | 0.45 m/min | 0.5 m/min | 0.56 m/min | 0.65 m/min | 0.75 m/min | 0.9 m/min |
| Crown block longitudinal speed | 3 m/min | ||||||
| Traverse speed of crown block | 3 m/min | ||||||
| Speed of bridge crane through hole | 3 m/min | ||||||
| Traverse speed of bridge crane | 3 m/min | ||||||
| Adapt to the angle of skew bridge | 0~45° | ||||||
| Suitable radius of curved bridge | 400m | 300m | 200m | ||||
Company Details
Business Type:
Trading Company,Seller
Year Established:
1992
Total Annual:
>300000000
Employee Number:
>500
Ecer Certification：
Active Member
Henan Yellow River explosion proof crane Co., Ltd. was founded in 1992, mainly producing "Langtai" brand series of lifting products. The registered capital of the company is 200 million yuan only. There are more than 500 employees, 110 people with college education or above, and more than ... Henan Yellow River explosion proof crane Co., Ltd. was founded in 1992, mainly producing "Langtai" brand series of lifting products. The registered capital of the company is 200 million yuan only. There are more than 500 employees, 110 people with college education or above, and more than ...
Get in touch with us
Leave a Message, we will call you back quickly!