Jiangyin M&C Heat Parts Co.,Ltd
| Payment Terms | L/C, D/P, T/T, Western Union |
| Supply Ability | 50000PCS/MONTH |
| Delivery Time | 5-8 work days |
| Packaging Details | Standard BOX/Wooden Case |
| Gasket Material | NBR/HNBR/EPDM/Viton A/Viton G/FPM |
| Plates Material | AISI 304/AISI 316/Titanium/TiPa/Nickel/SMO254/Alloy 904L |
| Gasket Center size | 870*122mm |
| Gasket Shape Size | 964.4*215.9mm |
| Gasket Thickness | 4.4mm |
| Transfer Area | 0.18㎡ |
| Gasket Hole Diameter | 65mm |
| Max Temperature | 220 ℃ |
| Max Pressure | 25bar |
| Plate Shape Size | 978*232mm |
| Brand Name | MC |
| Model Number | E18 |
| Certification | SGS ISO FDA |
| Place of Origin | Jiangsu, China (Mainland) |
View Detail Information
Explore similar products
Jacked Type Heat Exchange System ,RX10A Heat Exchange Unit Enhances Effect
Rubber Material LX30A Plate Heat Exchanger Gasket Flat Standard Size Jacked Type
OEM Heat Exchanger Coating , UX10 Heat Exchanger Fabricators Reasonable Design
Hastelloy Volvo Penta Heat Exchanger Gasket UX30 Clean Water Applicable Fluids
Product Specification
| Payment Terms | L/C, D/P, T/T, Western Union | Supply Ability | 50000PCS/MONTH |
| Delivery Time | 5-8 work days | Packaging Details | Standard BOX/Wooden Case |
| Gasket Material | NBR/HNBR/EPDM/Viton A/Viton G/FPM | Plates Material | AISI 304/AISI 316/Titanium/TiPa/Nickel/SMO254/Alloy 904L |
| Gasket Center size | 870*122mm | Gasket Shape Size | 964.4*215.9mm |
| Gasket Thickness | 4.4mm | Transfer Area | 0.18㎡ |
| Gasket Hole Diameter | 65mm | Max Temperature | 220 ℃ |
| Max Pressure | 25bar | Plate Shape Size | 978*232mm |
| Brand Name | MC | Model Number | E18 |
| Certification | SGS ISO FDA | Place of Origin | Jiangsu, China (Mainland) |
| High Light | M6M Heat Exchanger Gaskets ，Nickel Plate heat exchanger gaskets | ||
Special model chemical industry widegap channel corrugated plate heat exchanger Fischer E-18
E18 Plate Heat Exchanger Introduction
E18 plate heat exchangers are specifically developed and optimized for the food industry. A v ery wide range of different systems can be offered. Plate surfaces from 0.05㎡ to 1.5㎡ and throughputs up to 500m³/hr are available.
E18 Plate Heat Exchanger Gasket And Plate Parameter
| Rubber Type | NBR | EPDM | VITON/FKM | HNBR |
| Application Temperature | -20°C- +130°C | -50°C-+150°C | -30°C-+251°C | -15°C- +160°C |
| Fluid Media | Water Sea water Mineral oil Salt brine | Hot water Steam Acid Alkali | High temperature resistance Strong oxidants Oil Acid and alkali | High temperature mineral oil and water |
| Feature | Easier to replace than the traditional gasket, high pressure, high temperature, longer life, should not be leaked | |||
| Material of Plate | Suited liquid Kinds | |
| Stainless Steel(SUS304,316 etc) | Pure Water,Normal Water,Mineral Oil etc | |
| Ti,Ti-pd | Sea water,Saline water,Mineral water etc | |
| 20Cr,18Ni 6Mo(254SMO) | Dilute Sulphuric Acid,Organic water solution etc | |
| Ni | High-temp and concentration caustic soda | |
| Hastelloy alloy(C276,D205,B2G) | Concentrated sulfuric acid,Hydrochloric acid,Phosphoric acid | |
| Thickness of plate | 0.5mm/0.6mm/0.7mm/0.8mm/0.9mm/1.0mm | |
| Plate Shape Size | 978*232mm | |
| Plate Center Size | 870*122mm | |
| Transfer Area | 0.18㎡ | |
| Angle Hole Diameter | Φ65 | |
| Gasket Thickness | 4.4mm | |
| Working Pressure | <= 25 bar | |
| Plate Theta | Low Theta and High Theta | |
| Plate Hole | Channel Plate with 4 Holes, End Plate without holes | |
E18 Plate Heat Exchanger Advantage
| Compact design | High thermal efficiency |
| De-mountable for cleaning and maintenance | Can have additional heat transfer plates added if required |
| Suitable for hygienic and industrial applications | Suitable for use with steam |
| Food-safe material | CIP system-adaptable |
| Simple cleaning | A quality product |
| Low maintenance costs | Long service life |
| Profile variations for highly effective flow relationships | Special plates for steam condensation |
| Advantageous price/Performance ratio | Friendly service |
| High operational safety | Compactness |
| High effectiveness | Wide-ranging application possibilities |
| Food-proof materials | CIP-able |
| Easy cleaning | Austrian high quality product |
| Low maintenance costs | Long lifespan |
| Various profiles available | Different technologies of gaskets |
| Plate surface from 0.05㎡ to 1.5㎡ | Throughput up to 500m³/hr |
| Special plates for steam condensers |
How to install E18 Plate Heat Exchanger When Maintance?
1 Disconnect pipework from pressure plate
• disconnect pipework from pressure plate
Taking Out Heat Exchanger Plates
• remove the nuts (12a) versus clockwise
• losen all nuts for tensioning bolt (12) crosswise
• unscrew nuts for tensioning bolt (12) from tensioning bolt (1)
• remove washer for tie bar (13)
• remove tensioning bolts (1)
• push pressure plate (10) away from plate pack
• swing out first heat exchanger plate at bottom 20 - 30 cm in longitudal
direction [1]
• swing out plate laterally under an angle of
30 - 45° [2]
• take the plate off the frame
• remove plate by plate in the same manner
• observe the sequence and face position of plates - after cleaning they must be
installed back the same way
2 Cleaning of Heat Exchanger Plates
• rinse each plate with a suitable detergent (must neither attack gasket nor plate) information about suitable detergents can be obtained from Heat Exchanger manufacturer
• clean plates with a soft brush
• gaskets not to be exchanged:
- avoid soaking of plate in cleaning solution
• gaskets to be exchanged:
- soak plate in hot cleaning solution (approx. 100°C)
• at thick layers of scaling :
- soak plate in hot cleaning solution (approx. 100°C)
DO NOT use:
- steel brush
- steel scraper or similar
3 Re-assembling
• re-install again the cleaned plates
observe
- original sequence and position of each plate (as per numbers and plate arrangement drawing)
- gaskets installed and in good order
• fit individual plates (lateral insertion under 30 - 40°inclination)
• push pressure plate (10) to the plate plack
• re-insert tensioning bolts (1) back in lateral slots
• fit washers for tensioning bolt (13) to the tensioning bolts (1)
• tension the plate pack with the nuts for tensioning bolt (12)
- uniformly
- crosswise
- observe parallelism between pressure plate (10) and frame plate (4)
• observe tesnioning limit on name plate
• avoid:
- overtensioning (below min. tensioning limit on name plate)
- too little tensioning (above max. tensioning limit on name plate)
• fix the nuts for tensioning bolt (12) by mounting the nuts (12a)
• connect pipework again
• start up Heat Exchanger as per section 6
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2011
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Jiangyin M&C Heat Parts Co.,Ltd is a China heat exchanger manufacturer located in Wuxi, Jiangsu. M&C performing service and maintenance on heat exchanger gaskets and plates for other models. M&C operates at the forefront of thermal technology,offering innovative and effectiv... Jiangyin M&C Heat Parts Co.,Ltd is a China heat exchanger manufacturer located in Wuxi, Jiangsu. M&C performing service and maintenance on heat exchanger gaskets and plates for other models. M&C operates at the forefront of thermal technology,offering innovative and effectiv...
Get in touch with us
Leave a Message, we will call you back quickly!