Apv J092 Plate Heat Exchanger Gaskets For Chemical Process

Product Specification

APV Plate Heat Exchanger Plates and Gaskets J092 Model for Chemical Process and Industrial Applications
 
J092 Model Plate Heat Exchanger Operation & Configurations
 
Plate heat exchangers are one of the most versatile and cost-effective methods for the heating and/or cooling of fluids. The basic concept uses a corrugated heat transfer plate to separate the hot fluid from the cold and transfer the heat between the fluids.

The seal between the plates is established by a peripheral gasket which also separates the through ports and flow areas with a double barrier. The gasket either allows the fluid to flow down the plate channel or by-pass it to the adjacent plate channel as depicted in Figure 1.

Plate heat exchangers can be used in a variety of different configurations.

One configuration is closed circuit cooling, where the dirty cooling medium such as sea, river, lake or tower water is isolated at the plate heat exchanger and clean treated water is continually recirculated through the process plant. This configuration, as shown in Figure 2, protects process equipment from the dirty cooling fluid.

 
J092 Model Plate Heat Exchanger Specification
 

J092 Frame Dimensions

J092 Plate Heat Exchanger Gasket & Plate Picture

 
OEM & ODM PHE Gasket Parameters
 
Gaskets used in plate heat exchangers must have durability in various liquid qualities and temperature / pressure conditions. M&C has prepared the following gasket materials in order to support a wide variety of applications.
 

 
OEM & ODM PHE Plate Parameters

The plates are specially selected from various patterns so as to achieve optimum area and cost effective heat exchanger for each unit. These plates can be classified into three type, H type, L type, Mix type.

Plate Corrugate

Low angle channel arrangement for lower allowable pressure drops requirement applications;

Mixed channel arrangement for optional arrangement to gain the optimized performance;

High angle channels arrangement for higher thermal performance and allowable pressure drops requirement applications

The Standard Materials

304 Stainless Steel

This is the lowest cost heat transfer plate material. It has low corrosion resistance and is usually only available in a thickness of 0.5mm. This type of heat transfer plate is typically used in HVAC applications.

316 Stainless Steel

This is the most common heat transfer plate material and is used in many applications. 316 stainless steel has a high corrosion resistance and is typically available in thickness from 0.5mm to 0.8mm.

Titanium

This type is very resistant to chemical attack, including most acids, chloride, seawater and chlorine chemicals. This thickness of titanium is usually from 0.5mm to 0.6mm.

Hastelloy C276

Other common names: Alloy C276, Hastelloy C, Inconel® C-276, Hastelloy C276.

Hastelloy C276 is a nickel-molybdenum-chromium superalloy with tungsten added for excellent corrosion resistance in a variety of harsh environments. Alloy C-276 is widely used in the harshest environments such as chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment, and acid natural gas recovery. The thickness can range from 0.6mm to 0.8mm.

SMO 254

Sandvik 254 SMO is a high-alloy austenitic stainless steel developed for use in seawater and other aggressive chloride-bearing media. Thickness available from 0.6mm to 0.8mm.

PHE Plate Feature

PHE Application Areas/Occasions
 

J092 Plate Heat Exchanger Typical Chemcial Industry Applications

J092 ADVANTAGES FOR CHEMICAL AND INDUSTRIAL APPLICATIONS

• Wide selection of gasket and plate materials to stand up to aggressive process fluids
• Ease of cleaning and inspection
• Semi-welded pairs and gasketed plates available
• Semi-welded pairs reduce the chance of leakage
• Flexible configurations can be adapted to meet your changing process needs
• Efficient operation
• High thermal efficiency saves money through reduction in required heat transfer area
• Low liquid hold-up improves start-up time and reduces operating fluid costs
• Acheves up to 97% heat recovery
• Eliminates complicated maintenance such as x-ray, ultrasonic and other non-destructive test procedures
• Corrosion resistant materials reduce inspection and maintenance while ensuring reliable operation
• No moving parts eliminates vibration and reduces maintenance
• Lower capital costs when compared to traditional sheel and tube
• Compact design saves space
• Life cycle cost reduction
• Reduced fouling leads to higher thermal efficiency, reducing maintenance and operating costs

Plate Heat Exchanger Picture

M&C Heat Parts Company Profile

M&C Heat Parts Co., Ltd is founded in Wuxi, Jiangsu. M&C is specialized in designing and manufacturing high quality heat transfer equipment. The range of products comprises plates & gaskets, plate heat exchangers, gasketed heat exchangers and brazed heat exchangers. Thus, as one of the few producers worldwide, M&C offers solutions with optimum thermodynamic designs for different industries and virtually all applications.

M&C provide you with one-stop accessories service, multuple-brand & multiple model alternatives for your choice. We'll meet all your requirements of plate heat exchanger and keep your machine running contunously through our rich storage and quick response.

Moreover, we have a strict quality control and after-sales service system, from material purchasing to finished product package until the product received in good condition. Our products have been widely used all over the world in various fields.

M&C Plate Heat Exchanger Plates & Gaskets Other Models Recommend

Sondex/Danfoss - S4A, S7, S20, S21, S22, S41, S43, S47, S65, S81, S86, S100, S120, S130, SFD7, SFD13, SW19 and so on;

APV/SPX - H17, N25, N35, A055, A085, J060, J092, J107, M92, M107, K55, K71, B110, B134, P105, P190, SR1, SR2, TR9GN, TR9AL and so on;

Tranter/Swep - GX12, GL13, GC26, GC51, GX26, GX51, GX42, GX64, GX85, GX91, GX140, GX145 and so on;

API/Schmidt - Sigma 7, Sigma 9, Sigma 13, Sigma 26, Sigma 27, Sigma 36, Sigma 66, Sigma 106, Sigma 229, Sigma Star 45, Sigma Star 90 and so on;

Vicarb - V4, V13, V20, V28, V45, V60, V100, V110, V130 and so on;

Hisaka - EX11, EX15, EX15, LX026, LX195, LX395, LX595, RX135, RX395, RX595, UX115, UX225, UX395, UX495, UX815, UX995 and so on;

GEA - VT04, VT10, VT20, VT40, VT80, VT405, VT805, VT1306, NT50M, NT50X, NT100S, NT150S, NT150L, NT250M, NT250L and so on;

Funke - FP04, FP05, FP14, FP16, FP08, FP22, FP31, FP40, FP41, FP70, FP100, FP120 and so on;

Thermowave - TL200SS/PP, TL250SS/PP, TL400SS/PP. TL650SS/PP and so on;

DHP - DX143, DX146, DX20V, DX20DL, DX20DM, DX30S, DX36M and so on;

LHE - HT101, HT102, HT104, HT151, HT152, HT202, HT232, HT233 and so on;

M&C Plate Heat Exchanger Goods ready to Delivery