China factories

China factory - Shenzhen Soulin Electronics Technology Co., Ltd

Shenzhen Soulin Electronics Technology Co., Ltd

  • China,Shenzhen ,Guangdong
  • Verified Supplier

Leave a Message

we will call you back quickly!

Submit Requirement
China 10p8c PoE+ Rj45 Jack Connector 1000 Base-T 1 Port With Magnetics
China 10p8c PoE+ Rj45 Jack Connector 1000 Base-T 1 Port With Magnetics

  1. China 10p8c PoE+ Rj45 Jack Connector 1000 Base-T 1 Port With Magnetics
  2. China 10p8c PoE+ Rj45 Jack Connector 1000 Base-T 1 Port With Magnetics

10p8c PoE+ Rj45 Jack Connector 1000 Base-T 1 Port With Magnetics

  1. MOQ: 2000
  2. Price: Negotiable
  3. Get Latest Price
Payment Terms T/T
Delivery Time 14days
Supply Ability 1kk/mouth
Packaging Details tube/box/tape reel
name 1000 Base-T 1 Port 10p8c PoE+ RJ45 Jack Ethernet Connector RJ45 With Magnetics
voltage rating 125V
current rating 1.5A
Housing LCP black
contact phosphor bronze
life 750 cycles
operation -40℃ -- 85℃
Brand Name SOULIN
Model Number 1000 Base-T 1 Port 10p8c PoE+ RJ45 Jack Ethernet Connector RJ45 With Magnetics
Place of Origin CHINA

View Detail Information

Contact Now Ask for best deal
Get Latest Price Request a quote
  1. Product Details
  2. Company Details

Product Specification

Payment Terms T/T Delivery Time 14days
Supply Ability 1kk/mouth Packaging Details tube/box/tape reel
name 1000 Base-T 1 Port 10p8c PoE+ RJ45 Jack Ethernet Connector RJ45 With Magnetics voltage rating 125V
current rating 1.5A Housing LCP black
contact phosphor bronze life 750 cycles
operation -40℃ -- 85℃ Brand Name SOULIN
Model Number 1000 Base-T 1 Port 10p8c PoE+ RJ45 Jack Ethernet Connector RJ45 With Magnetics Place of Origin CHINA
High Light 10p8c Rj45 Jack Connector1000Base-T Rj45 Jack Connector10p8c rj 45 modular jack

10p8c PoE+ Rj45 Jack Connector 1000 Base-T 1 Port With Magnetics

 

  • RJ45 is different from RJ11

    Different standards, different sizes. Due to the different sizes (RJ11 is 4 or 6 pin, RJ45 is 8 pin connection device), it is obvious that an RJ45 plug cannot be inserted into an RJ11 jack. The reverse is physically possible (the RJ11 plug is smaller than the RJ45 jack), giving the illusion that the two should or could work together. Actually, it's not. It is strongly recommended not to use RJ11 plugs for RJ45 jacks.

    Because RJ11 is not internationally standardized, its dimensions, insertion force, insertion Angle, and so on are not consistent with international standard plug-in design requirements, and therefore interoperability cannot be guaranteed. They even cause damage to both. Since the RJ11 plug is smaller than the RJ45 jack, the plastic parts on either side of the plug will damage the metal pins of the inserted jack.

  • 10/100 Base TX RJ45 ports Are common Ethernet ports that support 10 mbit/s and 100 MBIT/s self-adaptive network connection speeds. Common RJ45 ports are DTE ports for Ethernet nics and routers and DCE ports for switches. DTE can be called "data terminal equipment", DCE can be called "data communication equipment". In a sense, DTE devices are called "active communication devices" and DCE devices are called "passive communication devices". When two devices of the same type communicate using an RJ45 connection, a crossover connection must be used. This can be illustrated by the following RJ45 DTE type pin definition and RJ45 DCE type pin definition:

    Definition of DTE pins of an RJ45 port

    RJ45 port DCE pin definition

    As can be seen from the figure above, if two DTE type interfaces (or DCE type interfaces) are connected without cross-connected pins, the pins of the contact are all data receiving (sending) pins, inevitably communication will not be carried out.

    Note in addition: Some DCE devices automatically negotiate with the peer end. In this case, cross-line or parallel line can be used for connection.

     

 

 

Item
RJ45 Female Connector
Part Status
Active
Connector Type
Jack
Number of Positions/Contacts
8p8c (RJ45, Ethernet)
Application-Lan
Ethernet (Poe/Non Poe)
Number of Ports
Single Port, 1xN Port, 2xN Port
Speed
100/1000/2.5G/5G/10G Base-T
Latch
Down/Up
Cores per Port
4/6/8/10/12
Orientation
90° / 180°
PCB Mount Angle
SIDE ENTRY
Shield EMI Tabs
Without / With
LED Option
Green/Yellow
PCB
FR4
PCB Retaining Post
T POST
Temperature
0℃ TO 70℃
Bst Circuit
Yes
AutomDX
YES
Contact Mating Area Plating
GOLD 6u"/15u"/30u"
Turns Ratio RX/TX
1CT:1CT
Configuration RX/TX
T,C

 

 

 

 

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer

  • Year Established:

    2009

  • Total Annual:

    10000000-30000000

  • Employee Number:

    200~300

  • Ecer Certification:

    Verified Supplier

Shenzhen Soulin Electronics Technology Co., Ltd. was established in September 2009     Currently, the main products are pin header, female header, box header, aviation connector, board to board connector, SATA connector, DIN41612 connector, RJ45 and other precision connectors.... Shenzhen Soulin Electronics Technology Co., Ltd. was established in September 2009     Currently, the main products are pin header, female header, box header, aviation connector, board to board connector, SATA connector, DIN41612 connector, RJ45 and other precision connectors....

+ Read More

Get in touch with us

  • Reach Us
  • Shenzhen Soulin Electronics Technology Co., Ltd
  • Building 12, Weijian Industrial Park, Tangtou Industrial Zone, Shiyan Street, Baoan District, Shenzhen
  • https://www.headersconnector.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement