Low Noise Solar Powered Water Pump For Agriculture Farm Irrigation

Product Specification

Solar Powered Water Pump For Agriculture Farm Irrigation Submersible Water Pump

Paramerter:

Maintenance:

1. If the pump will be not used for long-term, Please take the pump out of the water, and let the pump work in the clean water for a moment, and then dean the parts of pump and wipe clean

2. If the temperature is below 0 C, please take the water pump from the water immediately and discharge accumulation of water in the pump in case pump is broken because of freezing

Caution:

1. Before using the pump, please make sure the rated voltage marked on the nameplate and the voltage of actual use is consistent.

2. When installing, removing and cleaning the pump, you must unplug the power plug to ensure safety.

3. If the pump has been a serious collision, please check the pump, if broken, please stop using immediately.

Not intended to be moved when plugged in or in operation.

The supply cord can be replaced if the cord is damaged the appliance has to be scrapped.

Do not lift the pump by the power cord.

Please make sure the pump working in clean water.

Do not pump heated liquids with a temperature higher than 35℃.

The solar water pump system is an optical and mechatronic system that has been rapidly developed in recent years. It uses the power generated by solar cells to drive DC, permanent magnet, brushless, and position sensor through maximum power point tracking and transformation and control devices. The rotor double-sealed motor or high-efficiency asynchronous motor or high-speed switched reluctance motor drives the high-efficiency water pump to lift water from the surface to the ground for irrigation or human and animal drinking. From design to manufacturing modern technology involving electrical, mechanical, power electronics, computer, control and other disciplines, it provides an excellent means for the development of modern agriculture, energy conservation, environmental protection and so on. The system has good long-term economic efficiency, especially compared with the common diesel pumping, and has an overwhelming economic advantage. The development of this new type of environmentally-friendly and energy-saving products will undoubtedly bring great economic and social benefits to the development of the industry and the development of the economy, especially the development of modern agriculture in the arid regions. It is particularly in line with the construction of a resource-saving and environment-friendly society. development strategy. Photovoltaic water pumps use solar energy to be used in farmland irrigation, provide clean drinking water for people and animals, develop garden economy, beautify parks, construct colored fountains, raise oxygen for fish farming, raise shrimp ponds, and beach salt fields without any external energy. Water supply and drainage, etc. In addition, a large number of international ordering intentions indicate that the international market prospects of such high-tech products are very encouraging. As a newly emerging industry, the PV pump system is in line with China's sustainable development strategy.

Types of solar water pumps:

Brushed DC solar water pump

Brushless DC solar water pump (motor type)

Brushless DC solar water pump (magnetic drive isolated)

Characteristics of various solar water pumps

Advantages:

1. The motor type brushless DC water pump is composed of a brushless DC motor and an impeller. The shaft of the motor is connected with the impeller. There is a gap between the stator and the rotor of the water pump. When the water is used for a long time, the water will penetrate into the motor and increase the possibility of motor burnout.

2. Brushless DC motors have been standardized, and there are a large number of specialized manufacturers, which are relatively low in cost and high in efficiency.

3. Brushless DC magnetically isolated solar water pump: The brushless DC water pump uses electronic components to commutate without using carbon brush reversing. It uses high-performance wear-resistant ceramic shaft and ceramic bushing. The bushing is integrated with the magnet through injection molding. The wear is also avoided, so the life of the brushless DC magnetic pump is greatly enhanced. The stator part and the rotor part of the magnetically isolated water pump are completely isolated. The stator and circuit board parts are sealed with epoxy resin, 100% waterproof, the rotor part is made of permanent magnet, the pump body is made of environmentally friendly materials, low noise, small size, performance. stable. Various required parameters can be adjusted by winding the stator and can be operated at a wide voltage.

4. long life, low noise up to 35dB, can be used for hot water circulation. The stator and circuit board parts of the motor are encapsulated with epoxy resin and completely isolated from the rotor. They can be installed underwater and completely waterproof. The shaft of the pump is made of high-performance ceramic shaft with high precision and good shock resistance.