Excellent Performance Above Ground Water Pump , High Pressure Electric Pool Pump

Product Specification

High Performance Above Ground High Pressure Electric Swimming Pool Spa Water Pump

Description

This Electric Swimming Pool Pump takes care of cleaning, filtration and chlorine/salt distribution.

It features a revolutionised removable strainer basket with a built-in thermal overload protection as the water circulates and passes through the filter, it leaves your pool squeaky clean, free from leaves, hair strands, debris and other impurities.

This is constructed with longevity in mind and employs extensive use of corrosion-proof materials resistant to the elements along with all chemicals commonly associated with pool maintenance.

This pump is ideal for pool pumping, cleaning, hot water circulation etc. Sometimes people use it for increasing the water pressure in the pipe, garden sprinkling, and irrigation. It only needs solar off grid power to get work! Delivery head of 14 meters and suction up to 8 meters. This pump is simple to install and easy to use. No need of sophisticated knowledge of pumping but just a little imagination of how much you can do with it. It will pump up the water in no time.

Features :

Single stage, Threaded connection
With coating disposal inside the pump body to avoid scaling and have longer lifetime.
Double sealed: Mechanical sealed and oil sealed
Can work continuously and can start when stopping for long time

Swimming pool water pump, is suitable for normal swimming pool filtering system, whichcan perform the best function, with high flow and high lift, the heavy duty high performance motor ensures quiet operation, which will not be easily overheated, all the components have the property, ensuring its durable lifespan, and it is the best choice for swimming pool installation.

Swimming Pool Filter Circulation Pump - Construction, Installation Points

1) The construction and installation of the circulating water pump shall comply with the “Code for Construction and Acceptance of Installation of Compressors, Fans and Pumps” GB50275–98.

2) The pump foundation shall be constructed according to the design drawing. The anchor bolts of the stabilized motor shall be firmly integrated with the concrete foundation. The pre-buried holes shall be cleaned before pouring, the bolts themselves shall not be skewed, and the mechanical strength shall meet the requirements.

3) The pump base should have a damping rubber pad. The rubber pad is in close contact with the base surface. The outer casing has separation bolts and hot dip plating.

4) The pump is connected to the motor drive shaft, and the axial and radial tolerances do not exceed the specified value.

5) Pressure gauges and valves should be installed at the inlet and outlet of the pump.

6) Pipe connection: Connect the reducer/expansion pipe directly to the pump. The pump pipe installation should be carried out after the pump is positioned and leveled. Pump equipment must not bear the weight of the pipe. The installation sequence is a flexible shock absorbing joint, and the valve is in turn tightly attached to the water pump.

7), the piping flange should be consistent with the flange of the pump and valve. The direction of the valve installation handle should be easy to operate, the elevation is consistent, and the piping is neatly arranged.

8) Electrical connection: Fully protected against accidental contact, the junction box should be suitable for flexible connections.

Our Factory:

FREESEA group has been engaged in water pump industry for more than 15 years. Mainly produce water pump equipment: swimming pool pump, circulation pump, Multi-function submersible pump etc. It is located in Ningbo city Zhoushan island, we provide OEM service for many famous pool brand in foreign & domestic market. Pumps annual output more than 20 thousands. We accept different standard(USA, EU, CN etc).Has many branches in China main city and Spain, sales network extend to all over the world.