High Quality ARM MCU STM8L152C6T6 STM8L152C6 STM8L LQFP-48 microcontroller Stock

Product Specification

Introduction to STM8L152C6T6

The STM8L152C6T6 is a highly integrated microcontroller manufactured by STMicroelectronics. It belongs to the STM8L series and is based on an 8-bit STM8 core. Designed for low-power applications, this microcontroller offers a combination of performance, efficiency, and rich features, making it suitable for a wide range of applications such as smart meters, industrial sensors, and portable devices.

Features

The STM8L152C6T6 microcontroller boasts a variety of features that contribute to its versatility and performance:

• 8-bit STM8 core running at up to 16 MHz
• 32 KB Flash memory and 2 KB RAM
• Rich set of peripherals, including UART, SPI, I2C, and GPIOs
• Integrated analog peripherals, including ADCs, DACs, and comparators
• Timers and PWM outputs for precise timing and control
• Low-power modes for optimizing power consumption
• Integrated LCD driver for direct connection to LCD displays
• Operating voltage range from 1.8V to 3.6V

Peripherals

The STM8L152C6T6 microcontroller provides a wide range of peripherals, enhancing its functionality and enabling seamless integration into various applications:

• UART: The microcontroller features Universal Asynchronous Receiver-Transmitter (UART) interfaces, which facilitate serial communication. These interfaces support various baud rates and are essential for connecting the microcontroller to other devices for data transmission.
• SPI: The microcontroller includes Serial Peripheral Interface (SPI) ports, enabling high-speed synchronous communication with external devices. The SPI interface is commonly used for communication with sensors, displays, and memory devices.
• I2C: The microcontroller offers Inter-Integrated Circuit (I2C) interfaces, allowing communication with peripheral devices through a two-wire serial bus. It supports both master and slave modes and is widely used for sensor and peripheral communication.
• GPIOs: The microcontroller provides General-Purpose Input/Output (GPIO) pins, which can be configured as inputs or outputs to interact with external digital devices. These pins enable versatile connectivity and interfacing capabilities.
• ADCs and DACs: The microcontroller integrates Analog-to-Digital Converters (ADCs) for accurate conversion of analog signals into digital values. It also includes Digital-to-Analog Converters (DACs) for precise conversion of digital data back into analog signals. These peripherals are crucial for applications that require analog signal processing and control.
• Comparators: The microcontroller features analog comparators, allowing for precise voltage-level comparisons. These comparators are useful for applications that require threshold-based decision-making.
• Timers and PWM outputs: The microcontroller offers timers and Pulse Width Modulation (PWM) outputs for precise timing and control. These peripherals are valuable for applications that require accurate timing, such as motor control, power management, and signal generation.
• Low-power modes: The microcontroller provides multiple low-power modes, enabling developers to optimize power consumption based on specific application requirements. These low-power modes are essential for battery-operated devices and energy-efficient systems.
• LCD driver: The microcontroller integrates an LCD driver, allowing direct connection to LCD displays without the need for external components. This feature simplifies the design of applications that require visual output.

Development Tools

STMicroelectronics offers a range of development tools to support developers working with the STM8L152C6T6 microcontroller:

• STVD: ST Visual Develop (STVD) is a free integrated development environment (IDE) specifically designed for STM8 microcontrollers. It provides a comprehensive platform for code editing, compilation, debugging, and programming.
• STM8CubeMX: STM8CubeMX is a graphical tool that simplifies microcontroller configuration and generates initialization code based on the selected configuration. It streamlines the development process and accelerates project setup.
• Nucleo development boards: Development boards that incorporate the STM8L152C6T6 microcontroller and provide easy access to its pins and peripherals. These boards facilitate rapid prototyping, evaluation, and development of designs.

Specifications

The following table provides an overview of the key specifications for the STM8L152C6T6 microcontroller:

ConclusionThe STM8L152C6T6 microcontroller, with its 8-bit STM8 core, offers a wide range of features and peripherals tailored for low-power applications. It provides a balance of performance, efficiency, and integration, making it an excellent choice for various applications, including smart meters, industrial sensors, and portable devices. With its rich set of peripherals, low-power modes, and integrated LCD driver, the STM8L152C6T6 microcontroller enables developers to design innovative and energy-efficient solutions.

Please note that the information provided here is based on the available knowledge up until September 2021, and there may have been updates or newer versions of the product since then. It's always recommended to refer to the official documentation and specifications from STMicroelectronics for the most accurate and up-to-date information.