WUHAN GRACE NEW ENERGY CO., LTD.
| Payment Terms | T/T, Western Union |
| Maximum slitting Electrode width | ≤650mm |
| weight | about 2T |
| Unwinding mode: | single-axis passive unwinding, automatic correction, constant tension control; |
| Guide roller width: | ≥750mm |
| Cutting accuracy: | ± 0.1mm |
| Cutting material: | 9-30μm copper foil or aluminum foil, coated with electrode material on both sides, after drying and rolling, the thickness of 50~300μm battery electrode sheet |
| Brand Name | GERUISI |
| Model Number | GRS-110BH-750 |
View Detail Information
Explore similar products
Coin Cell Electrode Cutter Press Punching For Seperator Or Electrode
Pneumatic Die Cutting Electrode Machine Battery Laboratory Research
Lithium Battery Cell Tab Cutting and Shaping machine
Electric Roll To Roll Lithium Ion Electrode Battery Slitter Making Machine
Product Specification
| Payment Terms | T/T, Western Union | Maximum slitting Electrode width | ≤650mm |
| weight | about 2T | Unwinding mode: | single-axis passive unwinding, automatic correction, constant tension control; |
| Guide roller width: | ≥750mm | Cutting accuracy: | ± 0.1mm |
| Cutting material: | 9-30μm copper foil or aluminum foil, coated with electrode material on both sides, after drying and rolling, the thickness of 50~300μm battery electrode sheet | Brand Name | GERUISI |
| Model Number | GRS-110BH-750 | ||
| High Light | adjustable electrode punching machine ，ODM electrode punching machine ，ODM electrode slitting machine | ||
1) Power requirements: 380V/ three-phase /50Hz, power: 4KW
2) Compressed air: pressure: 0.6MPa, flow: 0.04M3 /min;
3) Cutting material: 9-30μm copper foil or aluminum foil, coated with electrode material on both sides, after drying and rolling, the thickness of 50~300μm battery electrode sheet;
4) Unwinding mode: single-axis passive unwinding, automatic correction, constant tension control;
5) Maximum width of unwinding: 660mm;
Winding diameter: maximum not less than 500mm;
6) Guide roller width: ≥750mm;
7) Transmission speed: mechanical speed: 50m/min, continuously adjustable.
8) Cutting accuracy: ± 0.1mm;
9) Material rewinding: upper and lower dual axis winding, winding diameter: maximum not less than Φ500㎜;
10) Total weight of equipment: about 2T,
The bearing capacity of the ground must be greater than 1.5T/m2, and a supporting plate (provided by the supplier) must be placed at the bottom of the device.
11) Equipment size: about 2050mm long x 1800mm wide x 1600mm high
| Continuous slitting intermittently coated or continuously coated battery electrode, mechanical speed: 50m/min, continuously adjustable. |
| Can change the slitting width and slitting number by replacing the pad, slitting width accuracy: ≤± 0.1mm; |
| Maximum slitting Electrode width: ≤650mm; |
| The winding and discharging reel is an air expansion shaft (among which: winding adopts slip air expansion shaft), with an axle diameter of 76.2mm(3-inch standard type), |
| The maximum winding and unwinding diameter is 500mm, which can be unwinding by lift truck; |
| Winding capacity 150 ~ 300kg, winding bearing capacity 150 ~ 300Kg; |
| Automatic tension control of winding and unwinding, tension value can be set continuously, synchronous control of winding; |
| Unwinding correction controller accuracy: ± 0.2mm. |
| Winding uniformity: ≤±0.2mm |
| Unwinding material diameter: Φ500mm |
| Total length of unwinding material: 80mm |
| Cutter diameter: Φ130mm; Blade structure; |
| Maximum waste edge width: ≤5mm(max); |
| Slitting edge without burr, no ripple, slitting width error ≤±0.1mm; After slitting, the vertical direction burr is 9μm, the plane direction burr is less than 13μm, and the straightness of the slitting is less than ±0.1mm/ m. |
| There is a special dust collection device for removing dust; (Vacuum cleaner user's own) |
| The end face of the rewinding material after the electrode plate is cut is neat and has no hem; |
| The upper and lower clearance of the cutter is adjustable; |
| There are safety protection measures before the slitting knife; |
| The cutting tool is equipped with a pole plate docking device; |
| The winding end has a bit of moving operation device (foot switch form); |
| Cutting speed servo speed, automatic synchronous tracking of winding; |
| Equipment spray color: according to the supplier's standard color sample; |
| The whole machine is safe, stable, reliable control and easy to operate. |
Company Details
Business Type:
Manufacturer
Ecer Certification：
Site Member
Wuhan Grace New Energy Co., Ltd. is a professional in battery complete experimental equipment, battery testing equipment, and dehumidification and purification equipment. We provides customized solutions for a complete set of lithium battery Laboratory and pilot produce lines, meeting the ... Wuhan Grace New Energy Co., Ltd. is a professional in battery complete experimental equipment, battery testing equipment, and dehumidification and purification equipment. We provides customized solutions for a complete set of lithium battery Laboratory and pilot produce lines, meeting the ...
Get in touch with us
Leave a Message, we will call you back quickly!