Shenzhen Hanyuan Intelligent Technology Co., Ltd.
| Delivery Time | 3-5 working days |
| Payment Terms | T/T, Western Union, MoneyGram |
| Supply Ability | 10000pcs per day |
| Product name | 1000W LED Grow light Driver |
| Input Voltage | 200-277VAC |
| Output Voltage | 24-56VDC |
| Warranty | 5 Years |
| Ip Rating | IP67 |
| Dimensions | 420mm X 90.8mm X 44.5mm |
| Power | 1000W |
| Input Current | 6.8A |
| Brand Name | ANROFU |
| Place of Origin | CHINA |
| Certification | CE ROHS FCC ETL DLC |
| Model Number | USP-1000-56-BA |
View Detail Information
Explore similar products
500W Customized LED Grow Light Driver For Enhanced Plant Growth Efficiency
Indoor LED Driver Grow Light 800W IP67 For Healthy Plant Growth
IP65 1000W Outdoor Constant Voltage LED Driver For LED Plant Lamp
500W 100-277VAC LED Grow Light Driver IP67 For Indoor Garden
Product Specification
| Delivery Time | 3-5 working days | Payment Terms | T/T, Western Union, MoneyGram |
| Supply Ability | 10000pcs per day | Product name | 1000W LED Grow light Driver |
| Input Voltage | 200-277VAC | Output Voltage | 24-56VDC |
| Warranty | 5 Years | Ip Rating | IP67 |
| Dimensions | 420mm X 90.8mm X 44.5mm | Power | 1000W |
| Input Current | 6.8A | Brand Name | ANROFU |
| Place of Origin | CHINA | Certification | CE ROHS FCC ETL DLC |
| Model Number | USP-1000-56-BA | ||
| High Light | Compact LED Driver Grow Light ，LED Driver Grow Light 1000W ，Plant Growth LED Driver Grow Light | ||
1000W High-Performance LED Grow Light Driver For Optimal Plant Growth
The LED Grow Light Driver is built to last, and it comes with a 5-year warranty to give you peace of mind. This driver is also rated IP67, which means that it is dust-tight and can withstand immersion in water up to 1 meter deep for up to 30 minutes. This makes it a perfect choice for use in indoor grow rooms where humidity and moisture levels are high.
The LED Grow Light Driver has an output voltage of 24-56VDC, which is perfect for powering most LED grow lights on the market. This voltage range is ideal for growing a variety of plants including vegetables, herbs, and flowers. The driver also has an input voltage range of 200-277VAC, which means that it can be used with a wide range of power sources.
The dimensions of the LED Grow Light Driver are 420mm X 90.8mm X 44.5mm, which makes it a compact and easy-to-install unit. The driver can be mounted on a wall or placed on a flat surface, depending on your preference. The compact size of the driver also makes it easy to transport and store when not in use.
The LED Grow Light Driver is a must-have for anyone who wants to grow plants indoors using LED grow lights. It is a reliable and efficient power source that delivers a stable voltage to your grow lights. The driver is built to last and comes with a 5-year warranty, so you can be sure that it will provide you with years of trouble-free service. With an IP rating of 67, the driver can withstand harsh indoor grow room conditions, making it a perfect choice for any indoor grower.
| MODEL | USP-1000-56-A | USP-1000-56-B | USP-1000-56-BA | NOTE | |
|
INPUT |
VOLTAGE | 200~277VAC | 200~277VAC | 200~277VAC | |
| FREQUENCY | 50~60Hz | 50~60Hz | 50~60Hz | ||
| MAXIMUM INPUT CURRENT | 6.8A | 6.8A | 6.8A | ||
| INRUSH CURRENT | ≦60A | ≦60A | ≦60A | ||
| STANDBY POWER CONSUMPTION | ≦3w | ≦3w | ≦3w | ||
| POWER FACTOR | ≥0.98(200Vac) ≥0.98(230Vac) ≥0.97(277Vac) | ≥0.98(200Vac) ≥0.98(230Vac) ≥0.97(277Vac) | ≥0.98(200Vac) ≥0.98(230Vac) ≥0.97(277Vac) | Full-load | |
| THD | ≦10.0%(200Vac) ≦10.0%(230Vac) ≦10.0%(277Vac) | ≦10.0%(200Vac) ≦10.0%(230Vac) ≦10.0%(277Vac) | ≦10.0%(200Vac) ≦10.0%(230Vac) ≦10.0%(277Vac) | Full-load | |
|
OUTPUT |
VOLTAGE RANGE | 24~56V | 24~56V | 24~56V | |
| CURRENT RANGE | Max 22.0A | 0~22.0A | 0~22.0A | ||
| MAXIMUM NO-LOAD VOLTAGE | ≦58V | ≦58V | ≦58V | ||
| EFFICIENCY | ≥91.0% @200Vac ≥92.0% @230Vac ≥92.0% @277Vac | ≥91.0% @200Vac ≥92.0% @230Vac ≥92.0% @277Vac | ≥91.0% @200Vac ≥92.0% @230Vac ≥92.0% @277Vac | Full-load | |
| CURRENT ACCURACY | ±5% | ±5% | ±5% | The actual≤±3% | |
| RIPPLE VOLTAGE | ±1% max 2% | ±1% max 2% | ±1% max 2% |
Full-load |
|
| RIPPLE CURRENT | ±5% max 10% | ±5% max 10% | ±5% max 10% | ||
| TURN ON TIME | ≦2S | ≦2S | ≦2S | ||
|
LINEAR ADJUSTMENT RATE |
±1% | ±1% | ±1% | ||
| LOAD REGULATION | ±3% | ±3% | ±3% | The actual≤±2% | |
|
AUXILIARY POWER SUPPLY (OPTIONAL) |
OUTPUT VOLTAGE | / | / | 12.8V±10% | |
| OUTPUT(CURRENT) | / | / | 300mA±5% | ||
✤ Dimming Performance (three-in-one dimming)
| PARAMETER | LEAST VALUE | TYPICAL CASE | CREST VALUE | NOTE | |
|
0-10V DIMMING (OPTIONAL) |
APPLIED PRESSURE |
0V |
0-10V |
15V |
Over 15V may cause the internal components of the power supply to burn out, and the function of the power supply is abnormal |
| THE DIMMING RANGE | 8% | 10-100% | 100% | DIM + comes with an output of 100 uA current | |
| PUSH THE DIMMING VOLTAGE | 0.8V | 1-10V | 10V | DIM + and DIM-no output | |
|
RESISTANCE DIMMING (OPTIONAL) |
EXTERNAL LIGHT ADJUSTMENT RESISTANCE |
8K Ω |
0-100KΩ |
100KΩ |
90 K Ω above is 100% output |
| THE DIMMING RANGE | 8% | 10-100% | 100% | DIM + comes with 100 uA constant flow output | |
|
PWM AIMING (SELECTABLE) |
PWM HIGH LEVEL | 9.5V | 9.6-10V | 10.5V | Dimmer PWM high level maximum |
| PWM LOW LEVEL | 0V | 0-0.35V | 0.5V | Dimmer PWM low level maximum | |
|
THE PWM DIMMING FREQUENCY SEGMENT |
500Hz | 1KHz | 2KHz | Best job at 1 KHz | |
| PWM DUTY CYCLE | 7% | 10-100% | 100% | DIM + and DIM-no output | |
| THE DIMMING RANGE | 8% | 10-100% | 100% | DIM + comes with 100 uA constant flow output | |
| THE DIMMING SHUT DOWN | TURN OFF THE VOLTAGE | 5% | 6% | 7% | According to the voltage, PWM, resistance ratio |
| CUT-IN VOLTAGE | 6% | 7% | 8% | ||
Note: 1. When using PWM or voltage dimming, please note that the dimmer controller is set at 10% to the lowest dimming value, and be set to close below 10%, and the lower limit is not lower than 8%! For other dimming methods, please also refer to this method.
2. When the resistance is used for parallel dimming (parallel light modulation), the number of parallel units is: N, then the resistance for dimming~is: 90 KΩ / N, and the dimming resistance value must be greater than the calculated value, then 8% 100% dimming can be realized.
3. When the dimmer is used for dimming, when 20% of the power is input, the power supply may have slight noise and water ripple phenomenon. At this time, the power supply enters the light load and high efficiency frequency jump mode, which is a normal phenomenon.
✤ Other Performance
| PARAMETER | SPECIFICATIONS | NOTE | |
|
LIFE LENGTH |
SHELL TEMPERATURE≤65℃ | 100000H | |
| SHELL TEMPERATURE≤75℃ | 50000H | ||
|
DEFENCIVE FUNCTION |
OVERCURRENT PROTECTION | 95%~108% | Constant current limit mode, after the load abnormal mode is removed, the power supply will automatically restore the output |
| SHORT-CIRCUIT PROTECTION |
0-10%power (Intermittent beating) |
||
| OVERVOLTAGE CROWBAR | ≥ floating voltage+10% |
At the overtemperature Tc point, the power supply starts to linearly reduce the power, and the Tc temperature returns to the power supply in the normal working area |
|
| OVERTEMPERATURE PROTECTION | Tc drop≥93℃ | ||
|
AVERAGE INTERVAL FAILURE TIME CALCULATION (MTBF) |
189400H |
230 Vac full load, ring temperature 25℃ (MIL-HDBK-217) |
|
SHELL TEMPERATURE |
Tc:max 98℃ | If the power supply is added to 98℃, the power supply is reduced to about 40% |
| CLASSIFICATION OF WATERPROOF | IP65 | |
| QUALITY ASSURANCE | Five years | SHELL TEMPERATURE:≤75℃ |
| WEIGHT | 2.90Kg | USP-1000-56-BA model weight |
| SIZE | 420.0*90.8*44.5mm | Including the L-type mounting bracket dimensions on both sides |
| INPUT LINE SPECIFICATIONS | 3*16 AWG L=450mm |
The default wire length, the external wire length can only be large or equal, not small. |
| OUTPUT LINE SPECIFICATIONS | 2*14 AWG L=300mm Double output | |
| TUNING LIGHT SPECIFICATIONS | 2*22 AWG L=350mm | |
| DIMMING + AUXILIARY SOURCE LINE SPECIFICATION | 3*22 AWG L=350mm |
The ANROFU LED Grow Light Driver has an output voltage of 24-48C a56nd an input voltage of 200-277VAC. It has an IP rating of IP67, meaning that it is dust-tight and can withstand immersion in water up to a depth of 1 meter. This makes it suitable for use in a variety of environments, including indoor and grow rooms.
The ANROFU LED Grow Light Driver is ideal for use in a variety of application occasions and scenarios. It can be used in commercial grow rooms, research facilities, and home-based grow rooms. It is compatible with a wide range of LED grow lights, making it a versatile product that can be used with different types of plants and growing conditions.
The ANROFU LED Grow Light Driver is backed by a 5-year warranty, which gives customers peace of mind and ensures that they are investing in a product that will last. this product provides a reliable and stable source of power for LED grow lights, ensuring that plants receive the right amount of light to thrive and grow.
The LED Grow Light Driver product technical support and services may include:
Please note that the specific technical support and services offered may vary depending on the manufacturer or supplier of the LED Grow Light Driver product.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Seller
Year Established:
2010
Employee Number:
>50-100
Ecer Certification：
Verified Supplier
Shenzhen Hanyuan Intelligent Technology Co LTD : Illuminating the Future of Indoor Cultivation Shenzhen Hanyuan Intelligent Technology Co LTD is a pioneering manufacturer of advanced LED grow light solutions for the horticulture industry. Founded in 2010 and headquartered in Shenzhen, w... Shenzhen Hanyuan Intelligent Technology Co LTD : Illuminating the Future of Indoor Cultivation Shenzhen Hanyuan Intelligent Technology Co LTD is a pioneering manufacturer of advanced LED grow light solutions for the horticulture industry. Founded in 2010 and headquartered in Shenzhen, w...
Get in touch with us
Leave a Message, we will call you back quickly!