Energy Saving Sanitary Centrifugal Pump Standard Protection Grade Motor

Product Specification

Energy Saving Sanitary Centrifugal Pump Standard Protection Grade Motor

Motor of Sanitary Centrifugal Pump

The motor conforms to the following standards GB 755-87

GB10069-88

Q/JBQS 28-20003. Excellent electric performance Low noise, low vibration Protection grade of high performance The standard protection grade of the motor is designed as lp54, IP55

According to user requirements, higher protection grade can be offered.

Suitable for use with double frequency and wide voltage.

Sanitary Centrifugal Pump Fluid knowledge

In sanitary technological system, the pump is running continuously and providing flowing power for liquid. This challenges the performances of the pump. To reduce risk, the pump shall be elaborately designed so as to solve complex problems.

This is the reason why GOBOR Company is doing its best to make the performances match the intended usage.

GOBOR Company is one of the few professional manufacturers in China that provide centrifugal pumps, sanitary pumps, self-priming pumps, circulating pumps, dairy pumps, food pumps, milk pumps, plate type heat exchangers and etc. But more importantly, we are the professional manufacturer in pump industry, and we have richprofessional knowledge, including pump engineering technologies, pump sealing technologies and pump innovative technologies.

Our product combination ensures the highest sanitary standard, the requirements for no-fault operation and low maintenance.

Shaft seal

The GKH sanitary centrifugal pump is provided with a set of externally mounted single end mechanical seal or water injection mechanical seal. The static ring of the mechanical seal is made ofstainless seal, silicon carbide or tungsten alloy. The dynamic ring is made of stainless seal, carbon, graphite or tungsten alloy. The seal ring of the water injection type seal is a durable lip seal. The series of pump products can also be equipped with the double end mechanical seal.

Sanitary Piston Pump technical data (2.2KW)

A|B|C|D|E|F|GH|K|J|R|P |KG

|100 |260 |143|240 |45 |140/200|90 |182 | 240/275 | 175 |88|295/355|39

Medium:20℃ clean water

Rotating Speed:2900RPM

Impeller diameter:

maximumφ165mm

miniumφ145mm

Inlet Diameter:D1φ51/38mm

Emor:±5%

Frequency:50Hz

outlet Diameter:D2φ38/32mm

Materials

Materials of liquid passing parts:AISI316L or AISI304 stainless steel Materials of other parts:AISI304 stainless steel Outer surface:titanium Inner surface:miror polishing 9.4 or titanium Liquid passing rubber seal materialEPDM FRMNBR