zhengzhou wangu machinery co.,ltd
| Supply Ability | 50 sets/year |
| Delivery Time | 30-50days |
| Packaging Details | stadard packing |
| Heating mode | Direct Heating/Indirect Heating |
| Fuel | Steam, oil, electricity or coal |
| Transport Way | Sea |
| Function | Grain drying |
| Colour | Green |
| Waranty | 1 year |
| Control System | PLC |
| Temperature Range | 50-150°C |
| Moisture Reduction | 8%-21% |
| Brand Name | Wangu |
| Model Number | 5WGD 2-3 |
| Certification | |
| Place of Origin | zhengzhou |
View Detail Information
Explore similar products
Product Specification
| Supply Ability | 50 sets/year | Delivery Time | 30-50days |
| Packaging Details | stadard packing | Heating mode | Direct Heating/Indirect Heating |
| Fuel | Steam, oil, electricity or coal | Transport Way | Sea |
| Function | Grain drying | Colour | Green |
| Waranty | 1 year | Control System | PLC |
| Temperature Range | 50-150°C | Moisture Reduction | 8%-21% |
| Brand Name | Wangu | Model Number | 5WGD 2-3 |
| Certification | Place of Origin | zhengzhou | |
| High Light | Large Belt Dryer Machine ，Multi-layer Belt Dryer Machine ，DWG Series Belt Dryer Machine | ||
DWG Series Multi-layer Belt Dryer
Summary
The machine adopts a van structure, in which a multi-layer conveyor belt is arranged, and the conveyor belt circulates in the van. The material is evenly distributed on the first conveyor belt, and is transported from the first layer of the mesh belt to the next layer of the mesh belt by the transmission of the chain. The lower layer alternately falls until down to the last layer of the mesh belt, at which time the material moisture also meets the drying requirements.. The air circulation adopts a counter-current process, and the high temperature and low humidity air flows upward from the lowermost mesh belt of the dryer to carry out mass heat transfer, thereby achieving the purpose of removing moisture, and the exhaust gas is discharged from the top through the induced draft fan. The equipment has a high degree of automation, and the material is automatically turned over during the drying process to ensure even drying. Low labor intensity, good working environment and simple equipment maintenance. The bottom of the box is designed with a blanking swash plate and a easy opening cleaning door to facilitate the cleaning of the powder in the box.
Structure diagram:
Specs:
| Model | DWG3ｘ6/1.2 | DWG3ｘ8/1.2 | DWG3ｘ10/1.2 | DWG3ｘ8/1.6 | DWG3ｘ10/1.6 | DWG3ｘ8/2.0 |
| Unit Number | 4ｘ3 | 4ｘ3 | 5ｘ3 | 4ｘ3 | 5ｘ3 | 4ｘ3 |
| Belt width(m) | 1.2 | 1.6 | 2 | |||
| Drying section length(m) | 6ｘ3 | 8ｘ3 | 10ｘ3 | 8ｘ3 | 10ｘ3 | 8ｘ3 |
| Material thickness(mm) | 10-85 | |||||
| Temperature(℃) | 50-130 | |||||
| Steam pressure(MPa) | 0.2-0.8 | |||||
| Steam consumption(kg/h) | 310-550 | 350-590 | 400-700 | 450-850 | 480-970 | 480-970 |
| Heat exchange area(㎡) | 750 | 820 | 1000 | 1060 | 1320 | 1350 |
| Drying intensity(kgH₂O/h) | 120-400 | 150-450 | 220-550 | 230-600 | 290-750 | 290-750 |
| Numbers of fan | 14 | 14 | 17 | 14 | 17 | 14 |
| Dryer power | 21 | 30.8 | 37.4 | 42 | 51 | 56 |
| Total power | 26.5 | 35.3 | 41.9 | 46.5 | 55.5 | 60.5 |
| Size(LｘWｘH) | 7.8ｘ2.2ｘ4.5 | 9.8ｘ2.2ｘ4.5 | 11.8ｘ2.2ｘ4.5 | 9.8ｘ2.6ｘ4.7 | 11.8ｘ2.6ｘ4.7 | 9.8ｘ3.1ｘ4.9 |
| Total weight | 4600ｘ3 | 4700ｘ3 | 5700ｘ3 | 5500ｘ3 | 6500ｘ3 | 6450ｘ3 |
Characteristic
1.Material is subjected to slight vibration and impact on the mesh belt. Material particles are not easily broken and powdered. Therefore, it is also suitable for drying some materials which are not allowed to break.
2. Belt dryers are not only for material drying, but sometimes for baking, firing or curing.
3. The belt dryer has the advantages of simple structure, convenient installation, long-term operation, convenient use, maintenance and repair.
4. The air consumption, heating temperature, material residence time and feed rate can be precisely adjusted for optimum drying results.
5. Most of the air is recycled, which is highly energy efficient.
6. The unique air distribution device makes the hot air distribution more uniform and ensures the consistency of product quality.
7. The heat source can be matched by steam, heat conducting oil, electricity or coal (oil) fired furnace.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Importer,Exporter,Trading Company
Year Established:
1998
Total Annual:
16000000-17910477
Employee Number:
200~300
Ecer Certification：
Verified Supplier
ZHENGZHOU WANGU MACHINERY CO.,LTD Our company is founded in 1998 who specializes in the design and manufacture of various drying equipment and has obtained a number of patents in professional drying field.Main products incl... ZHENGZHOU WANGU MACHINERY CO.,LTD Our company is founded in 1998 who specializes in the design and manufacture of various drying equipment and has obtained a number of patents in professional drying field.Main products incl...
Get in touch with us
Leave a Message, we will call you back quickly!