Shenzhen Hicorpwell Technology Co., Ltd
| Supply Ability | 500000 pcs per week |
| Delivery Time | 5-15 working days based on qty |
| Packaging Details | Fiber Optic Cable Protection Sleeve will packing with standard export carton box |
| Item Name | Ribbon Protection Sleeves |
| Steel Size | 1mm, 1.2mm, 1.5mm |
| Application | Protect Splicing Point |
| Shrinking Temperature Range | 110 to 130°C |
| Working Temperature | -45 to 110°C |
| Clad DiameterLength | 25/ 35/45/40/60mm or customize |
| Tensile Strength (Mpa) | 20 |
| Raw Material | PE |
| Brand Name | Hicorpwell |
| Model Number | Rribbon Protection Sleeves with Double Ceramic Strength Member |
| Certification | ISO9001 2015 |
| Place of Origin | Guangdong Shenzhen |
View Detail Information
Explore similar products
Fiber optic Polishing Machines Grinding Machine For Fiber Optic Patch Cord
SC With Shutter Type InGaAs Detector Chip 1260-1620nm Wavelength Small Area
Shenzhen Kit Fiber Cable Blowing Machine To fit fiber optic cables 32mm, 40mm
RF coaxial feeder cables RRU Fiber Optic Cable Power Cable Combined Hole Cable
Product Specification
| Supply Ability | 500000 pcs per week | Delivery Time | 5-15 working days based on qty |
| Packaging Details | Fiber Optic Cable Protection Sleeve will packing with standard export carton box | Item Name | Ribbon Protection Sleeves |
| Steel Size | 1mm, 1.2mm, 1.5mm | Application | Protect Splicing Point |
| Shrinking Temperature Range | 110 to 130°C | Working Temperature | -45 to 110°C |
| Clad DiameterLength | 25/ 35/45/40/60mm or customize | Tensile Strength (Mpa) | 20 |
| Raw Material | PE | Brand Name | Hicorpwell |
| Model Number | Rribbon Protection Sleeves with Double Ceramic Strength Member | Certification | ISO9001 2015 |
| Place of Origin | Guangdong Shenzhen | ||
| High Light | Fiber Protection Ribbon Protection Sleeves ，Ribbon Fusion Splice Sleeve | ||
Rribbon Protection Sleeves with Double Ceramic Strength Member for Fiber Protection Fusion Splice Sleeve
Brief Introduction :
Generally speaking, Hicorpwell fiber optic sleeve consists of three parts. The first part is the inner tube made by hot-meltable adhesive. This material can encapsulate the fusion splice joint and provides vibration damping and an environmental seal so as to protect the fiber from damage and contaminants. The second part is a reinforcing strength member outside the inner tube.
The strength member can be made of stainless steel, ceramic or non-metallic. It offers extra rigidity to prevent misalignment, micro bending or breakage of the fiber. The third part is the heat-shrinkable outer tube made of cross-linked polyolefin. This tube provides an instant shrink-force and drives the adhesive liner into all areas of the splice and excludes all the air. The following picture shows the structure of a fiber protection sleeve.
Two Types of Fiber Protection Sleeve
This kind of protection sleeve is used for Single Mode Fiber. Its strength member adopts the stainless steel needles to reduce fiber damage. Typical lengths are 40 mm and 60 mm. The sleeve color is selective, but most people would choose the transparent tube for better inspection of the fiber status.
Ribbon Fiber Protection Sleeve
The ribbon type is to protect ribbon splices of multiple fiber counts. The ceramic strength member is used to supporting the splices. Fiber counts in a ribbon sleeve vary from 2 to 12 fibers. The length of the sleeve is usually 40 mm. If stronger protection is required, you can choose the ribbon protection sleeves with double ceramic strength members.
Hicorpwell Fiber Optic Sleeve Characteristics:
Single holed (pre-shrunk)
Clear sleeve design
Smooth stainless steel reinforcing member
Sealing structure suitable to temperature
Extended liner length
Low shrink temperature
Pre installed stainless steel or ceramic rod
Accommodates single or ribbon fibers
Wide range of sizes
Operating temperature -45degree to 100degree
Min. full recovery temp: 120degree
Hicorpwell Fiber Optic Sleeve Application:
Fusion splicing
Fiber cable protecting
Specification
| Model | Sleeve Diameter After Shrink(mm) | Out Tube Length (mm) | Steel Diameter (mm) | Steel Length (mm) | Package (pcs) |
| HCW-40 | 3.0 | 40 | 1.5 | 36 | 100 |
| HCW-45 | 3.0 | 45 | 1.5 | 40 | 100 |
| HCW-60 | 3.0 | 60 | 1.5 | 56 | 10 |
Company Details
Business Type:
Manufacturer,Importer,Exporter
Year Established:
2013
Total Annual:
3,000,000-5,000,000
Employee Number:
160~166
Ecer Certification：
Site Member
Shenzhen Hicorpwell Technology co.,Ltd was founded in 2013 is located in Shenzhen , workshop area more than 3000 square meters . The company is at the forefront of Research &Development, Manufacturing, and Sales of a broad range of fiber optic and connectivity products, includi... Shenzhen Hicorpwell Technology co.,Ltd was founded in 2013 is located in Shenzhen , workshop area more than 3000 square meters . The company is at the forefront of Research &Development, Manufacturing, and Sales of a broad range of fiber optic and connectivity products, includi...
Get in touch with us
Leave a Message, we will call you back quickly!