Shenzhen Genyu Optical Co., Ltd.
| Payment Terms | T/T, Paypal, Western Union, MoneyGram, Credit Card |
| Supply Ability | 150K pcs/ Month |
| Delivery Time | 7-15 days |
| Packaging Details | Foam Cottons and Carton Boxes |
| Panel Size | 0.91 inch (diagonal) |
| Resolution | 128*32 dots |
| Display Color | White |
| Driver IC | SSD1306 |
| Interface | I2C |
| Brand Name | Genyu |
| Model Number | GY091BD01W |
| Certification | RoHS, ISO9001: 2015 |
| Place of Origin | China |
View Detail Information
Explore similar products
0.91 Inch OLED Display 128x32 Pixels Blue 12PIN SSD1306 with SPI interface
0.91 Inch OLED Display 128x32 Resolution White 15pin FPC SPI Interface
0.91 Inch OLED Display White 128x32 Dots 15pin Socket Type SPI Interface
0.96 Inch OLED Screen Module White 128*64 Pixels SSD1306 I2C Interface
Product Specification
| Payment Terms | T/T, Paypal, Western Union, MoneyGram, Credit Card | Supply Ability | 150K pcs/ Month |
| Delivery Time | 7-15 days | Packaging Details | Foam Cottons and Carton Boxes |
| Panel Size | 0.91 inch (diagonal) | Resolution | 128*32 dots |
| Display Color | White | Driver IC | SSD1306 |
| Interface | I2C | Brand Name | Genyu |
| Model Number | GY091BD01W | Certification | RoHS, ISO9001: 2015 |
| Place of Origin | China | ||
| High Light | White 0.91 Inch OLED Display ，0.91 Inch OLED Display 128x32 ，0.91 inch oled module SSD1306 | ||
0.91 Inch OLED Display Module White 128x32 Dots SSD1306 4PIN I2C Interface
Common Features:
Display Size:
Diagonal Size: 0.91 inches.
Resolution: 128x32 pixels, is most common for smaller displays.
OLED Type: Monochrome: Most 0.91-inch OLED displays are monochrome (usually white, blue, or yellow), meaning they display one color against a black background
Interface:
I2C: Most 0.91-inch OLED modules use the I2C interface for communication, which requires only two data lines (SDA for data and SCL for the clock). I2C is convenient for simpler wiring and slower communication speeds.
SPI: Some 0.91-inch OLED modules may also support SPI (Serial Peripheral Interface), which allows for faster data transfer but requires additional wiring.
Driver IC: SSD1306: This is one of the most popular OLED controllers, widely used in 0.91-inch modules
Power Supply: OLED displays are relatively low-power compared to traditional LCDs because they don’t require a backlight—each pixel emits its light. However, they still need a supply of 3.3V or 5V (depending on the model) to operate.
PCB Mounting: Rigid PCB: Others come with a rigid PCB, which is more common in embedded or stationary applications like handheld devices, sensors, and gadgets.
Detailed Specifications:
| 1 | Brand Name | Genyu |
| 2 | Model Number | GY091BD01W |
| 3 | Display Mode | OLED(Organic Light Emitting Diode) |
| 4 | Color | White |
| 5 | Size | 0.91 inch |
| 6 | Dot Matrix | 128*32 Pixels |
| 7 | Module Size | 38.0(W)*12.5(H)*11.9(T) mm |
| 8 | View Area | 24.384(W)*7.584(H) mm |
| 9 | Active Area | 22.384(W)*5.584(H) mm |
| 10 | Dot Size | 0.159(W)*0.159(H) mm |
| 11 | Dot Pitch | 0.175(W)*0.175(H) mm |
| 12 | Drive IC | SSD1306BZ |
| 13 | Connector | COG+FPC |
| 14 | Interface | SPI |
| 15 | Operating Temperature | -40~+85℃ |
| 16 | RoHS Compliant | Yes |
OLED Screens ( 0.42 inch~3.12 inch ):
We mainly develop small-middle sizes OLED displays, including 0.42", 0.49", 0.66", 0.78", 0.87", 0.91", 0.96", 1.12", 1.21", 1.3", 1.5", 1.54", 1.92", 2.08", 2.23", 2.42", 2.7", and 3.12", etc.
How to Use a 0.91-inch OLED PCB with Arduino:
To connect and use a 0.91-inch OLED display with an Arduino (or other microcontroller), follow these basic steps:
1. Wiring the Display:
I2C Interface (Most Common):
VCC to 3.3V or 5V pin on the Arduino (depending on the display specs).
GND to the ground (GND) pin on the Arduino.
SCL to the SCL pin on the Arduino.
SDA to the SDA pin on the Arduino.
SPI Interface (if applicable):
VCC to 3.3V or 5V pin on the Arduino.
GND to the GND pin.
SCK (Serial Clock) to SCK pin on the Arduino.
MOSI (Master Out Slave In) to MOSI pin on the Arduino.
CS (Chip Select) to any digital pin on the Arduino (e.g., pin 10).
A. 1) Custom Segment LCD Display;
2) Monochrome Graphic/Dot Matrix LCD Display Modules;
3) Micro OLED Display Modules;
4) Color TFT LCD Display Panels;
5) LED Backlights.
2. Q: Where is your factory?
A. Our office is in Shenzhen, Guangdong and our factory is located in Jiangxi Province.
5. Q: Can I get a lower price for OLED displays?
A: Yes, cheaper price with bigger/larger quantities order.
6. Q: How do you control the quality of products?
A: All products are 100% inspected before shipment.
Company Details
Business Type:
Manufacturer
Year Established:
2003
Total Annual:
60,000,000-600,000,000
Employee Number:
700~1000
Ecer Certification：
Verified Supplier
Shenzhen Genyu Optical Co., Ltd. was established in 2003. Mainly R&D, Production and sales of LCD Display、OLED, and TFT LCD Module. Professional customized LCD Screen (including TN、HTN、STN、FSTN、VA(BTN))、COG and COB LCD Modules. All of our products are passed CE, RoHS, and ISO 90... Shenzhen Genyu Optical Co., Ltd. was established in 2003. Mainly R&D, Production and sales of LCD Display、OLED, and TFT LCD Module. Professional customized LCD Screen (including TN、HTN、STN、FSTN、VA(BTN))、COG and COB LCD Modules. All of our products are passed CE, RoHS, and ISO 90...
Get in touch with us
Leave a Message, we will call you back quickly!