BAI YUN General Purpose Sealant Epoxy Colored Sand Grout BD636

Product Specification

Product Description

BD636 Epoxy Colored Sand Grout is a reactive two-component grout which made of polymer resin, special curing agent, high-quality colored sand and other raw materials.It is designed for various anti-mold sealing, and has the advantages of frosted matte texture, environmental friendly, good construction performance, etc. BD636 Epoxy Colored Sand Grout can be widely used in kitchens, bathrooms, hotels, and homerenovation to seal the seams, and will bring you a new construction concept and aesthetic effect.

Application:

1. Beautify and protect the seams of antique tiles, frosted tiles, glazed tiles, imported

linen tiles and other tiles.

2, Indoor window sill, balcony, kitchen, bathroom, all kinds of seams of mold and

mildew, waterproof sealing.

How to use:

1. Seam cleaning: Use the seam cone, spatula or other tools to clean up the grease,
loose material and other pollutants in the seam, and clean up with a vacuum cleaner to
ensure that the tile seam and the surrounding clean, dry, no dust and particles, no
grease, and no loose material.
2. Material preparation: Open the tap and put on the nozzle, then put the product into
the double-cartridge sealant gun. Cut the mixer nozzle to proper shape and size base
on the project needs. Discard some grout in the front part (about 30cm) to avoid
improper mixing, until the grout color is stable and uniformly.
3. Caulking construction: It is recommended that before caulking, both sides of the
gap should be waxed or pasted with masking tap for protection; when caulking
construction, slowly force the material to be evenly coated in the gap, and move the
mixing tube backward evenly.
4. Pressing the seam: Use the seam ball or adjusting knife along the tile seam evenly
from one end to the other.
5. Residual cleaning: caulking construction after 6~12 hours (slightly different due to
different ambient temperatures), grout curing to a certain extent, tear off the paper or
clean the semi-cured grout on the surface of the tiles with cleaning spatula.

Precautions

1. The construction temperature should be around 5~35 ℃; humidity should be less
than 70%; avoid construction on the humid and rainy weather or in the humidity
greater than 70%;
2. For the uneven or unsmooth tile surface, protecting with masking tape or waxing is
recommended before construction;
3. Before the first construction, a small area test can be taken to confirm the color and
construction method, and then construct the large area;
4. The curing time is different under different temperature and humidity. Before
cleaning the residual material, please test shovel in a small area to confirm that you
can easily shovel the residual material before shoveling a large area of grout;
5. After the construction is completed, it can be put into use only after 24 hours of
maintenance at a temperature of 20~35℃; 72 hours are needed for complete curing; if
the temperature is lower than 20℃, it is necessary to prolong the maintenance time; it
is forbidden to soak in water or splash moisture on the surface of the adhesive before
complete curing; it is not suitable to bear loads during the curing period;
6. In the area of direct sunlight, light-colored grout has the risk of color change, it is
not recommended to use light-colored grout.

Package  and Storage: Double-cartridge

Net: 490g

Shelf-life: 12 months from date of manufacture in cool and dry place below 27℃

Applicable Standards: Q/GZBYKJ 38