OEM ODM Wireless Smoke Detectors Fire Gas Detection System

Product Specification

Smart Wireless Addressable Photoelectric Smoke Alarm Detector for School/ Hotel

Product Introduction:

JTY-GM-TC5401W Wireless Addressable Photoelectric Smoke Detector (hereinafter referred to as the detector) is an intelligent industrial fire detector made according to the principle of high-precision infrared pair tube emission and reception, which can be controlled with our company’s wireless fire alarm control panel/wireless fire protection linkage control panel (hereinafter referred to as the control panel) and the smart home platform APP (hereinafter referred to as the APP) are used together. The detector uses 470MHz wireless transceiver technology, with a highly integrated micro-processing chip to process data. It has the characteristics of high sensitivity, long transmission distance, and low power consumption. It can accurately and quickly detect changes in smoke concentration in the environment, accurately and timely confirm the fire and call the police.

This product has beautiful appearance design, simple and convenient installation. It is suitable for places where a large amount of smoke is generated when a fire occurs, while there is no smoke, dust and steam retention under normal circumstances. This product is widely used in all kinds of residential buildings, which can detect fire early and protect people's lives and property to the utmost extent.

Main Characteristics

1.Using advanced wireless communication technology, signal transmission can be completed without wiring, and the engineering installation is simple and convenient;

2.Using 470MHz frequency band communication, FSK coding technology, strong anti-interference ability, long transmission distance;

3.With battery low-voltage detection function, remind users to replace when the battery is insufficient to maintain the detector's normal operation.

4.With dust accumulation alarm function.

Main technical specifications

1. Battery model: CR17450 3V

2. Working Current: Standby Current≤8uA; Alarm Current≤18mA

3. Indicators: Fire Indicator: red, flashing once every 48s during inspection, and always on when alarming

Fault Indicator: yellow, flashes twice every 48s when the battery is under power, and periodically flashes when the communication fails after being connected to the network

Working Indicator: Green, flashing periodically when the communication is normal after entering the network

4. Coding method: automatically assigned by the controller during networking

5. Communication method: 470MHz FSK coded two-way communication

6. Communication distance: ≤50m

7. Transmitting power: <20dBm

8. Frequency band: 470MHz

9. Protection area: When the height of the space is less than 8m, the protection area of a detector is 20～30㎡ for the general protection site.

The specific parameters should be based on the "Code for Design of Automatic Fire Alarm System" (GB 50116-2013).

10. Use environment: Atmospheric pressure: 86kPa～106kPa

Temperature: -10℃～+55℃

Relative humidity: ≤95%, no condensation

11. Dimensions: diameter 100mm high 55mm (including base)

12. Shell protection grade: IP30

13. Shell material and color: ABS, off-white

14. Weight: about 118g (including battery)

15. Installation hole distance: 60mm

16 .Executive standard: GB 4715-2005 "Point Type Smoke Fire Detector"

Fault and Abnormal information processing and Regular Check

Company Profile

Henan Weiguo Intelligent Technology Co., LTD., founded in 2015, is an important subsidiary of Hanwei Electronics Group Corporation (Stock no.:300007) in the field of intelligent healthy, safe home and IoT business. Henan Weiguo Intelligent Technology Co., LTD., relying on the core sensor technology, focuses on gas and smoke alarm, air quality monitor, alcohol tester and firefighting products. Based on introduction of featured technology from both Hanwei Electronics Group Corporation and abroad, Henan Weiguo intelligent Technology Co., LTD., has developed into an innovative company with the collection of design, R&D development, production, sales and service. We will always be committed to becoming the leader in intelligent hardware, providing safe, healthy, environmentally friendly and intelligent working and living environment for families and users all over the world.

FAQ
Q1: Are you manufacturer?
A: (yes)
Q2: What is the lead time?
A: usually
Fire control: one week working day
bulk quality: three weeks working days
Emergency lights: two weeks working days
bulk quality: four weeks
Q3: How do you ship the goods and how long does it take arrive?
A: We usually ship by DHL, UPS, FedEx or by Air. 3-5 days after payment received.
Q4: Can I have a sample order?
A:Yes,we welcome sample order to test and check quality.
Q5: Do you offer OEM service?
A: Yes, we can design the device according to your request.