Beijing JJRS Technology Development Co., Ltd.
| Supply Ability | 10-12 set/year |
| Delivery Time | 7~10 months |
| Packaging Details | wooden box; plastic package |
| Material | Cold Rolling Coil, Hot Rolling Acid Pickling Coil |
| Thickness | 1.0~1.5mm |
| Width | 650mm |
| Annual Output | 100,000 ton |
| Type | continuous |
| Coating | Galvanizing, Painting, Plating, Hot dip galvanizing, zinc coat |
| After-sales service provided | Engineers available to service manchinery overseas, field installation, online support |
| Name | Continuous Galvanizing Line |
| Production mode | double/single work line |
| Brand Name | JJRS |
View Detail Information
Explore similar products
Annealing Hot Dip Galvanizing Line In Line 0.18-0.8mm 1250mm 180 000TPY
Continuous Hot Dip Galvanising Line 0.7-1.7mm 450mm 120000TPY Steel Metal
100000TPY Hot Dip Galvanizing Line In 1.5-3.0mm 550mm
Steel Hot Dip Galvanizing Line Process 0.15-0.8mm 1250mm 200000TPY
Product Specification
| Supply Ability | 10-12 set/year | Delivery Time | 7~10 months |
| Packaging Details | wooden box; plastic package | Material | Cold Rolling Coil, Hot Rolling Acid Pickling Coil |
| Thickness | 1.0~1.5mm | Width | 650mm |
| Annual Output | 100,000 ton | Type | continuous |
| Coating | Galvanizing, Painting, Plating, Hot dip galvanizing, zinc coat | After-sales service provided | Engineers available to service manchinery overseas, field installation, online support |
| Name | Continuous Galvanizing Line | Production mode | double/single work line |
| Brand Name | JJRS | ||
| High Light | Zinc Hot Dip Galvanizing Lines ，Hot Dip Galvanizing Lines 1.0-1.5mm ，zinc hot dip galvanizing process | ||
Continuous Galvanizing Line 1.0~1.5mm*650mm 100,000TPY ( steel metal)
The process comprises a number of technically-advanced intermediate stages, e.g. degreasing, pickling and rinsing, which result in the achievement of a clean surface, ready to be immersed in a zinc bath. The final product of the HDG process is a multi-layered protective coat. Its innermost layer, the so-called Gamma layer, is formed by Fe and Zn compounds, where iron makes for 25%. The thickness of this layer is approx. 1 μm. Going towards the surface, the second layer, Delta, contains up to 10% of iron. The iron content in the third subsequent layer, Zeta, is even smaller. At the surface, the external coat of steel is nearly completely composed of pure zinc.
The minimum required thickness of zinc coating is worked out on the basis of the following data:
thickness of the steel item to be galvanized,
time of immersion in the zinc bath,
silicon and phosphorus content in the steel.
A properly applied zinc coat should hold for 10 to 100 years, depending on its thickness and the influence of mechanical erosion and aggressive environments.
Hot-dip galvanization is a cost-effective and environmentally friendly method of corrosion protection of steel, which provides high performance anticorrosive coats that are pleasing to the eye.
Consolidating the advantages of the traditional technology " Improved Sendzimir" and "United States Steel Corp", and integrating the independently researched and developed regenerative nozzle and waste heat efficient recycling technology, the technology R&D team of Beijing JJRS Technology Development Co.,Ltd, launched a new generation of steel strip continuous annealing hot dip galvanizing process contrl technology based its latest self-designed process control technology by in-depth study and analysis, which is named as " JJRS-Sendzimir".
Research & Development Objective of " JJRS-Sendzimir"
Genuine heat regenerative non-oxidation heating
Waste heat "extreme recycling"
No end in energy conservation and environmental protection
Two Core of " JJRS-Sendzimir"
Compared with the traditional technology, " JJRS-Sendzimir" method can greatly increase productivity. For its:
Technical Data of continuous hot dip galvanizing line(CGL):
| | | |
| b) Type | Coil-to-Coil | Coil-to-Coil |
| c) Raw Material | Coil rolled low carbon steel (full hard & annealed) | |
| d) Coil Thickness (mm) | 0.17 ~ 0.8 | 0.17 ~ 0.8 |
| e) Coil Width (mm) | 762 ~ 1000 | 762 ~ 1250 |
| f) Coil I.D(mm) | Ø508 | Ø508 |
| g) Coil Weight (Ton) | 20 | 20 |
| h) Production Capacity (Ton/hr) | 4.0 | 9.0 |
| i) Zink Coating Weight (g/m2) | 183 | 183 |
| j) Line Speed (m/min) | 50 | 100 |
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2006
Total Annual:
20000000-8000000
Employee Number:
1~100
Ecer Certification：
Active Member
Beijing JJRS Technology Development Co.,Ltd. registered in national high-tech park - Beijing Economic and Technological Development Zone, is a high-tech enterprise specialized in a complete set of metallurgical equipments for metal surface coating and steel strip intensive processing, its technology... Beijing JJRS Technology Development Co.,Ltd. registered in national high-tech park - Beijing Economic and Technological Development Zone, is a high-tech enterprise specialized in a complete set of metallurgical equipments for metal surface coating and steel strip intensive processing, its technology...
Get in touch with us
Leave a Message, we will call you back quickly!