SHANGHAI FAMOUS TRADE CO.,LTD
| Payment Terms | T/T |
| Supply Ability | 1000pc/month |
| Polytype | 4H-P |
| Density | 3.23 g/cm3 |
| Resistivity | ≤0.1 Ω.cm |
| Mohs Hardness | ≈9.2 |
| Surface Orientation | Off axis: 2.0°-4.0°toward [1120] ± 0.5° |
| Roughness | Polish Ra≤1 nm |
| Packaging | Multi-wafer Cassette or Single Wafer Container |
| Application | LED chip, satellite communication |
| Brand Name | ZMSH |
| Model Number | SiC 4H-P |
| Certification | rohs |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
4H-N Silicon Carbide SiC Substrate 2inch 3inch 4inch 6inch 8inch Prime Grade
High Purity un-doped Silicon Carbide sic Wafer , 6Inch 4H-Semi Sic Silicon
Undoped transparent silicon carbide sic crystal Optical Lens with hardness 9.2
2 Inch 6H - Semi Silicon Carbide Wafer Low Power Consumption For Detector
Product Specification
| Payment Terms | T/T | Supply Ability | 1000pc/month |
| Polytype | 4H-P | Density | 3.23 g/cm3 |
| Resistivity | ≤0.1 Ω.cm | Mohs Hardness | ≈9.2 |
| Surface Orientation | Off axis: 2.0°-4.0°toward [1120] ± 0.5° | Roughness | Polish Ra≤1 nm |
| Packaging | Multi-wafer Cassette or Single Wafer Container | Application | LED chip, satellite communication |
| Brand Name | ZMSH | Model Number | SiC 4H-P |
| Certification | rohs | Place of Origin | CHINA |
| High Light | 6 Inch Sic Silicon Carbide Substrate ，2 Inch Sic Silicon Carbide Substrate | ||
Silicon carbide substrate 4H-P type refers to P-type (Positive-type) silicon carbide material with 4H crystal structure. Among them, "4H" describes a polycrystalline form of silicon carbide, which has a hexagonal lattice structure and is a more common one among various crystal forms of silicon carbide, and is widely used in semiconductor device manufacturing because of its excellent physical and chemical properties. The off-axis is 2.0°, which refers to the deviation Angle of the cutting direction of the substrate relative to the crystal spindle, which has a certain influence on the electrical and mechanical properties of the material.
2 inch diameter Silicon Carbide (SiC) Substrate Specification
| 等级 Grade | 工业级 Production Grade (P Grade) | 研究级 Research Grade (R Grade) | 试片级 Dummy Grade (D Grade) | ||
| 直径 Diameter | 50.8mm±0.38mm | ||||
| 厚度 Thickness | 350 μm±25 μm | ||||
| 晶片方向 Wafer Orientation | Off axis: 2.0°-4.0°toward [1120] ± 0.5° for 4H/6H-P, On axis:〈111〉± 0.5° for 3C-N | ||||
| 微管密度 Micropipe Density | 0 cm-2 | ||||
| 电阻率 ※Resistivity | 4H/6H-P | ≤0.1 Ω.cm | |||
| 3C-N | ≤0.8 mΩ•cm | ||||
| 主定位边方向 Primary Flat Orientation | 4H/6H-P | {10-10} ±5.0° | |||
| 3C-N | {1-10} ±5.0° | ||||
| 主定位边长度 Primary Flat Length | 15.9 mm ±1.7 mm | ||||
| 次定位边长度 Secondary Flat Length | 8.0 mm ±1.7 mm | ||||
| 次定位边方向 Secondary Flat Orientation | Silicon face up: 90° CW. from Prime flat ±5.0° | ||||
| 边缘去除 Edge Exclusion | 3 mm | 3 mm | |||
| 总厚度变化/弯曲度/翘曲度 TTV/Bow /Warp | ≤2.5 μm/≤5 μm/≤15 μm/≤30 μm | ||||
| 表面粗糙度※ Roughness | Polish Ra≤1 nm | ||||
| CMP Ra≤0.2 nm | |||||
| 边缘裂纹(强光灯观测) Edge Cracks By High Intensity Light | None | 1 allowed, ≤1 mm | |||
| 六方空洞(强光灯观测) ※ Hex Plates By High Intensity Light | Cumulative area≤1 % | Cumulative area≤3 % | |||
| 多型(强光灯观测) ※ Polytype Areas By High Intensity Light | None | Cumulative area≤2 % | Cumulative area≤5% | ||
| Si 面划痕(强光灯观测)# Silicon Surface Scratches By High Intensity Light | 3 scratches to 1×wafer diameter cumulative length | 5 scratches to 1×wafer diameter cumulative length | 8 scratches to 1×wafer diameter cumulative length | ||
| 崩边(强光灯观测) Edge Chips High By Intensity Light light | None | 3 allowed, ≤0.5 mm each | 5 allowed, ≤1 mm each | ||
| 硅面污染物(强光灯观测) Silicon Surface Contamination By High Intensity | None | ||||
| 包装 Packaging | Multi-wafer Cassette or Single Wafer Container | ||||
Notes:
※Defects limits apply to entire wafer surface except for the edge exclusion area. # The scratches should be checked on Si face only.
1. Q:What is the effect of 2.0° off-axis on the performance of silicon carbide substrate?
A:Off-axis cutting can improve some electrical and mechanical properties of SIC substrate, such as increasing carrier mobility and optimizing surface topography, which is conducive to the manufacture and performance improvement of subsequent devices.
2. Q:How to choose the right silicon carbide substrate 4H-P off-axis to 2.0°?
A:ZMSH can select products that meet customer requirements based on the specific application scenario, taking into account factors such as substrate purity, defect density, crystal integrity and doping concentration.
Tag: #Sic wafer, #silicon carbide substrate, #4H-P type, #Off axis: 2.0°-4.0°toward, #Sic 4H-P type
Company Details
Business Type:
Manufacturer,Agent,Importer,Exporter,Trading Company
Year Established:
2013
Total Annual:
1000000-1500000
Ecer Certification：
Verified Supplier
SHANGHAI FAMOUS TRADE CO.,LTD. locates in the city of Shanghai, Which is the best city of China, and our factory is founded in Wuxi city in 2014. We specialize in processing a varity of materials into wafers, substrates and custiomized optical glass parts.components wi... SHANGHAI FAMOUS TRADE CO.,LTD. locates in the city of Shanghai, Which is the best city of China, and our factory is founded in Wuxi city in 2014. We specialize in processing a varity of materials into wafers, substrates and custiomized optical glass parts.components wi...
Get in touch with us
Leave a Message, we will call you back quickly!