Anhui Fumai Machinery Manufacturing Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 20000 |
| Delivery Time | 10 |
| Packaging Details | CARTON |
| OUTPUT DIA. | 3INCH |
| power | 3.5kw |
| lift head | 16m |
| usage | to provide continuous supply of water to industrial, commercial establishments, houses, hospitals, aquariums, and agriculture. |
| Brand Name | FUMAI |
| Model Number | fmwp800 |
| Certification | CE |
| Place of Origin | HEFEI |
View Detail Information
Explore similar products
Portable Farm Irrigation Fire Fighting fishery lift head 16mtrs centrifugal pump
42.8CC 4 In 1 Grass Trimmer 1.35KW Gas Powered Hedge Trimmer CDI Ignition
Fumai 3inch open impeller single suction aluminum alloy Horizontal clean water
BC520 Gasoline 52 CC Engine Backpack Brush Cutter Weeder Trimmer Grass Cutting
Product Specification
| Payment Terms | T/T | Supply Ability | 20000 |
| Delivery Time | 10 | Packaging Details | CARTON |
| OUTPUT DIA. | 3INCH | power | 3.5kw |
| lift head | 16m | usage | to provide continuous supply of water to industrial, commercial establishments, houses, hospitals, aquariums, and agriculture. |
| Brand Name | FUMAI | Model Number | fmwp800 |
| Certification | CE | Place of Origin | HEFEI |
Water pump maintenance instructions
the running-in period is about 5-10 hours, you have to change the oil, otherwise the impurities in the oil tank in the running-in period will jam the crankshaft .
Fill the four-stroke gasoline engine with gasoline above 90# and add lubricating oil to the tank. Please check the oil level before each use.
When the gasoline engine is working continuously, the crankcase temperature should not exceed 90 degrees. When it is overheated, it should be shut down for 15-20 minutes and then continue to work. When adding gasoline, it must be cooled down.
It is forbidden for gasoline engines to stop at high speeds, and the throttle should be lowered to the lowest speed before stopping.
Use the correct type of engine oil, clean engine lubricating oil without impurities, and gasoline without impurities.
The air filter element should be checked regularly and replaced regularly. The dirty filter element should be washed with soapy water and dried before use.
The machine is like your car, and it needs frequent care and maintenance to extend its life.
| Engine model 168FB | |
| Engine type | OHV25 single cylinder,Forced air cooling,4-stroke |
| EnginePower kW/RPM | 3.5/3600 |
| Ignition system | induction ignition |
| Starting system | recoil start |
| Fuel tank capacity | 3.6L |
| Oil capacity | 0.6L |
| Water pump parameter: | |
| Intel Dia | 80mm(2inch) |
| Output Dia | 80mm(2inch) |
| Lift head | 15.8m |
| Max.suction head | 5m |
| Max.flow rate | 39.6m3 /h |
| M.T mm | 520*395*420 |
| Self-priming time (s) | ≤150 |
| Cavitation allowance (m) | 4.0 |
| Net weight (kg) | 25±1 |
| G.W KG | 26 |
| Material | Aluminum Alloy Aluminum Alloy |
| Drive mode | manual |
| Use | Irrigation,extinguish a fire,Drainage |
| Pump shaft position | horizontal |
| Impeller structure | Open impeller |
| Number of impellers | Single stage |
| Impeller suction method | Single suction |
| Principle | vortex pump |
| Performance | non-blocking |
| Conveying medium | clean water pump |
The gasoline engine water pump is a centrifugal pump composed of a water pump and a bracket. It has the advantages of low cost, light weight, convenient maintenance, and low manufacturing cost and low noise.
Uses: flood control and drainage, fire fighting, farmland irrigation, mountain water delivery, garden irrigation, etc.
1. The water pump has the advantages of simple installation, small footprint, convenient maintenance, and no noise.
2. The overall structure is compact, small in size, low in noise, energy-saving and environmentally friendly, and convenient for maintenance. There is no need to build a pump room, and it can work when it is submerged in the water.
3. The impeller design is advanced, the large flow channel can pass long fibers and dirt, and has strong anti-clogging, anti-winding and flow capacity.
Company Details
Business Type:
Manufacturer
Year Established:
2020
Total Annual:
8000000-10000000
Employee Number:
100~200
Ecer Certification：
Active Member
Anhui Fumai Machinery Manufacturing Co., Ltd. was established in July 2020, with "only practical products, not conceptual products" as the concept, is a collection of research and development, design, production, manufacturing, sales in one of the garden machinery and equipment brand e... Anhui Fumai Machinery Manufacturing Co., Ltd. was established in July 2020, with "only practical products, not conceptual products" as the concept, is a collection of research and development, design, production, manufacturing, sales in one of the garden machinery and equipment brand e...
Get in touch with us
Leave a Message, we will call you back quickly!