24 Volt Forklift Battery Watering Kit , Automatic Battery Watering System

Product Specification

24 Volt Forklift Battery Watering Kit , Automatic Battery Watering System

AWS-12 For 24v 12cells Forklift / Golf / Traction Battery

Porduct Description:

During the period of development and long-term practical usage, the leak tightness of MYING automatic watering system has received complete recognition.

To make your new or existing forklift battery virtually maintenance free,

we recommend installing an automatic battery watering system and water level indicator.
 

Makeup of the Automatic Watering System

•  Automatic Watering Plug
•  End Plug
•  Floater
•  T-piece & L-piece
•  Flow Indicator(with filter)
•  6mm, 8mm ,10mm watering pipe
•  Male & Female couplings (Kv10 and KV6, etc.)
•  Water Tank

Suitable for battery pack: 12V,24V,36V,48V

Automatic waterfilling plug is connected with a T-piece which is easy to be installed and can be rotate,Then a T-piece is connected to the water plastic pipe.There is a lens which can see the top water level indicator at the top of waterfilling plug,When the water level is reached, the flow indicator is closed and the injection is finished.

When the top cover of the automatic watering system is inclined to open, the temperature of the electrolyte can be measured.

FAQ

Q:  How to properly install the automatic watering system?

A:   Our automatic wateringsystem is easy to operate, noneed to finish watering the electrolyte in the storage battery by hand, time saving and labor saving, besides, it canextend the service life.

Q:  How to  choose proper floaters?

A:   According to different storage battery,we have five kinds of floaters for you to choose.In order to achieve our expectedstandard and completely reflect the effectiveness of the automatic watering system, the most important thing is to choose proper floaters.

Q: What to care during the filling process?
A:  

1．Inordertoensureasafewateringprocess,weherebyrecommendyoutouseflowindicator(withfilter), theflowindicator withfilter can not only timely indicate whether it finishes watering, but also avoid unclean impurities entering the battery to result interruption.
2．The watering pressure should be within the range of 0.2-0.6, no less than200mbar.
3．You’d better conduct watering within the specified periods, because frequent filling will lead to overflowing for too much water, which will do great damage to the storage battery.
Note:Filling after finishingcharging is the bestideal state, besides, do not filling before charging.

Meanwhile we will offer detailed installation drawings to ensure that the clients can correctly install and standardize the operation.

Product Function

• The floater of the automatic watering plug can reach correct water level, when the level rises in the cell, the pressure closes the valves and prevents further water entering the cell. When the system finishes watering, the flow indicator will stop running and you can see the water-level indicator clearly through the top of the watering system.
• Besides, the material of floater can avoid damage and ineffectiveness.
• As for the structure of automatic watering system, there is a terraced step, when the electrolyte gas rises to the watering plug, the terraced part can prevent the leakage of the electrolyte gas as well as quickly cool the electrolyte gas to make them go back to the storage battery in time.
• Our automatic watering system is safe, reliable and applicable, besides, from the economic aspect and with the advantage of cost reduction, energy saving and environment protection, it is the first-choice product in the present market.