Xi'an Kacise Optronics Co.,Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 100+ |
| Delivery Time | 5-8 work days |
| Packaging Details | 15*20*15cm,0.3kg |
| Range | 1m~12m |
| Supply voltage | 3.3 ... 30 VDC |
| Working current | ≤ 10 mA |
| Output signal | 4-20mA/NPN/PNP/RS485 |
| Measurement accuracy | ≤1 %F.S. |
| Temperature compensation | Yes |
| Ranging resolution | 0.1mm |
| Working temperature | -40…85℃(233...358K) |
| Protection class | IP68 |
| Shell material | PVDF |
| Electrical connection | 5-core cable (analog output), 6-core cable (switch output) |
| Brand Name | Kacise |
| Model Number | KUS550 / KUS630 |
| Place of Origin | China |
View Detail Information
Explore similar products
NPT PTFE Ultrasonic Level Sensor Anti Corrosion Chemical Liquid Measurement
PTFE Corrosion Resistant Ultrasonic Level Transducer / RS485 Water Level Sensor
12M range ultrasonic level sensor/anti-corrosion industrial sensor
16mm 40KHz development waterproof ultrasonic sensor receiver sender piezoelectri
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 100+ |
| Delivery Time | 5-8 work days | Packaging Details | 15*20*15cm,0.3kg |
| Range | 1m~12m | Supply voltage | 3.3 ... 30 VDC |
| Working current | ≤ 10 mA | Output signal | 4-20mA/NPN/PNP/RS485 |
| Measurement accuracy | ≤1 %F.S. | Temperature compensation | Yes |
| Ranging resolution | 0.1mm | Working temperature | -40…85℃(233...358K) |
| Protection class | IP68 | Shell material | PVDF |
| Electrical connection | 5-core cable (analog output), 6-core cable (switch output) | Brand Name | Kacise |
| Model Number | KUS550 / KUS630 | Place of Origin | China |
| High Light | 12m Ultrasonic Liquid Level Sensor ，PVDF Material Ultrasonic Liquid Level Sensor ，Liquid Waterproof Ultrasonic Sensor | ||
KUS Series Ultrasonic Sensor
1. Features
2. Description
The ultrasonic object/liquid level sensor is installed on the upper part of the container, and under the functional control of the combined unit and electronic components, the probe emits a beam of ultrasonic pulses to the measured object. The sound wave is reflected by the surface of the object, and part of the reflected echo is received by the probe and converted into an electrical signal. The time from ultrasonic emission to re-reception is proportional to the distance from the probe to the measured object. The electronic unit detects this time and calculates the measured distance from the known speed of sound so that the level value can be calculated. Since temperature has an effect on the velocity of sound, the meter should measure temperature to correct for the velocity of sound. There are many options for the four-wire system, which can support 4-20mA and RS485 communication at the same time.
PVDF (polyvinylidene fluoride) has the strongest toughness, low friction coefficient, strong corrosion resistance, aging resistance, weather resistance, and good radiation resistance among fluoroplastics. It is suitable for use in various outdoor places, remote detection, on-site liquid level/level display.
3.Low power consumption mode
Work mode set to 2 is low power concumption working mode.
How to realize the low power consumption ultrasonic level and distance sensor
a) Use low power ICs
We use almost new ICs by wich the power consumption is normally low.
b) Controll the power of each circuit in the sensor.
There are three parts of the circuit in the sensor, the transmitting circuit, the receiving circuit and the basic circuit of the mcu. The mcu realizes power consumption management by enabling control of the work of each part of the circuit, and then controls the power consumption.
c) When the mcu itself is not working, it enters sleep mode to further reduce power consumption.
4.Installation conditions
If the sensor is installed at the environment temperature fall below 0℃, It should do well on the protective measures. In case of direct mounting of the sensor in a through hole using the steel nuts, it has to be fixed at the middle of the housing thread.
5.Ordering information
| KUS | Model | Output | Max range | Description |
| 550/630 | ||||
| Customized | ||||
| SW-1 | Switch Output,SW-1 for one switch output,SW-2 for 2 switch outputs | |||
| mA | 3 wire 4-20mA output | |||
| 5V | Output is Vout 0-5V | |||
| 3V | Output is Vout 0-3V | |||
| RS485 | Output is RS485 | |||
| TTL | UART TTL output | |||
| XX m | XX m is the maxim range can be detected, the max range is 5 meters Default is 2.5m | |||
| KUS | 550 | RS485 | 2m | |
Company Details
Business Type:
Manufacturer
Year Established:
2008
Total Annual:
8000000-10000000
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments . We have been specializing... Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments . We have been specializing...
Get in touch with us
Leave a Message, we will call you back quickly!