Automatic Printer Slotter Die Cutter Folder Gluer Inline

No

Item

Function and configuration

Machine unit move

• Motorized control machine units move, the warming bell is alarming when moving, make sure working safety.
• Drive shaft is equipped with friction clutch to avoid damage machine caused by incorrect operation.
• When machine units separate, each brake system work automatically, make sure gear positioning accurately, fix printing phase, ensure gear engaged correct when machine units lock.

• Machine unit adopts pneumatic locking system.

• Main motor frequency conversion control, energy saving. Main motor with start protecting device, machine can not run when machine units aren’t lock.

Roller type lead edge feeder

• Adopts lead edge feeder with wind volume system, it can adjust wind volume according on cardboard bending status to ensure feeding board smoothly.

Feeding roller

• Top feed roller is made of high qualified steel, the outside be wrapped wear-resisting rubber, don’t destroy flute, guarantee feeding precision, improve the printing accuracy.

• Bottom roller used high-quality steel, precision grinding, knurling, hard chrome plated paper roll hand mode rapid clearance of fine-tuning self-locking device, equipped with a dial display to adjust direction and numerical.
• Double roller, feed board more smooth and accurately

• The left and right baffles adopt electric digital control, the front baffles space adopts manual adjustment, the back baffle box be adjusted by motorized.

Dust-extraction unit

• Vacuum suction system combine with cleaning brush sweep board surface, improve the effect of printing

Automatic zero device

• After finishing the work order ,back to zero position

Item

Function and configuration

The printing roller

• Adopt good quality steel tube, the surface be grinded, hard chrome plated, balance correction, running smoothly
• Hang plate device, cooperate with the ratchet shaft fixed volume board fix printing plate fast.
• Full hang-plate device, 10mm hang-plate strip is available.
• Foot switch electric control roller run clockwise or anticlockwise, convenient hanging version,unloading version.

Impression roller

• Seamless steel tube surface is grinded and plated hard chrome, do balance correction, running stable.
• Equipped manual gap adjustment device that fast and self-locking, dial indicates to show set direction and set amount.

Feeding roller

• Use thick good quality steel pipe, professional manufacturing, do balance processing, the feeding roller adopt fine grinding to be molding.
• Equipped manual gap adjustment device that fast and self-locking, dial indicates to show set direction and set amount.

Anilox roller

• Seamless steel tube surface being grinded and plated hard chrome, balance correction, smooth operation
• Mesh amount 220-250 or according to customers' demand
• Pneumatic lift-down mechanism(while feeding, the anilox roll go down automatically; stop feeding, it go up automatically )
• Equipped manual gap adjustment device that fast and self-locking, dial indicates to show set direction and set amount.

Rubber roller

• Adopt high quality stemless steel pipe, the surface be grinded, hard chrome plated, balance correction, running smoothly
• Special grinded crowning, work well
• Equipped manual gap adjustment device that fast and self-locking, dial indicates to show set direction and set amount.

Phase adjustment

• Planetary gear structure
• Printing phase adopts 360 degrees electric adjustment (either run or stops)
• Printing roller manual horizontal adjustment, adjustment range + / - 14 mm

Ink supply system

• With pneumatic diaphragm pump to supply ink, automatically circulation, work stable and it is easy to operate and maintain.
• Ink filter, filter impurities, more better printing
• Equipped with closed ink tank

Printing phase fixed device

• Pneumatic brake mechanism
• When units separating or cleaning, braking mechanism limit gear running, keep original gear’s position

Zero-return and memory

• After washing the printing plate, press reset button the printing roller will back to the original printing position.

No

Item

Function and configuration

Crease wheel

• Using high quality steel, with grinding process and plating hard chromium.
• Pressure roller surface be grinded and hard chromium plating ,do balance processing
• Equipped special design wheel is keep from crack.
• Equipped manual gap adjustment device that fast and self-locking, dial indicates to show set direction and set amount.

Slot knife seat adjustment on axial direction

• The seamless steel pipe is selected and balanced by fine grinding for stable operation.
• Slotting knife width 7mm, alloy material, heat-treated grinding, tooth-shaped slotting knife, sharp edge, high precision.
• The height adjustment of slotted knife box adopts four-blade synchronous adjustment, and the slotted blade adopts four-blade
• electric synchronous horizontal movement.
• Hand-adjustable quick-gap fine-tuning self-locking device, equipped with a dial to display the adjustment direction and value

Slotting phase adjustment

• Structure of planetary gear type

• Slotting phase adopt 360 degree electric synchronous adjustment.

Option, clients are beard the cost

No

Item

Function and configuration

Die roller(bottom roller)

• High quality steel be finished process, the surface chrome plated, do balance correction, running stable.
• It is installed with pneumatic elevation equipment to facilitate die cutting, minimize the rubber cushion cutting times and prolong its service life
• Pneumatic lift-down, it is easy to work, reduce cut times on anvil cover, prolong its use life.

Rubber roller(top roller)

• High quality steel be finished process, the surface chrome plated, do balance correction, running stable.
• The gap between top roller with bottom roller be adjusted by hand.
• Taiwan “Maxdura” anvil cover, easy change, economy
• The gap between feed roller with rubber roller is self-locked.
• Speed compensation device can make the rubber roller slipping follow die roller, thereby, the rubber surface speed controlled by knife die. So that the carton shape is same as knife die.
• Equipped with rubber repair device, the rubber can be used after be repaired.
• Mechanical helix fluted-roll type, transverse movement 20mm.

Phase adjustment

• Planetary gear mechanis
• Phase adjustment by motorized control in 360degree( both running and stop)

Waste remove belt

Whole piece belt feed waste board out to machine units