Shanghai Rising International Trade Co., Ltd.
| Payment Terms | T/T, L/C, Western Union |
| Supply Ability | 5000 tons per month |
| Delivery Time | 5 - 30 days |
| Packaging Details | Ocean Safe Package, Wooden Pallets/ Cases |
| Material | Al 7xxx series available |
| Temper | O T H |
| Grade | 7xxx series |
| Length | ≤38000mm |
| Width | 200mm – 4300mm |
| Thickness | 6mm – 260mm |
| Brand Name | SR or OEM |
| Model Number | Al sheet 016 |
| Certification | SGS, BV |
| Place of Origin | China |
View Detail Information
Explore similar products
Aviation Material Aircraft Aluminum Sheet Excellent Plasticity T Temper
Aircraft Plate Aerospace Grade Aluminium , 6xxx Series Airplane Aluminum Sheets
2a12 Alloy Aircraft Grade Aluminium Sheet Oem Service High Strength For Wings
Airframe Fuselage Frame Aircraft Aluminum Sheet Plate 7050 7150 7055 Alloy
Product Specification
| Payment Terms | T/T, L/C, Western Union | Supply Ability | 5000 tons per month |
| Delivery Time | 5 - 30 days | Packaging Details | Ocean Safe Package, Wooden Pallets/ Cases |
| Material | Al 7xxx series available | Temper | O T H |
| Grade | 7xxx series | Length | ≤38000mm |
| Width | 200mm – 4300mm | Thickness | 6mm – 260mm |
| Brand Name | SR or OEM | Model Number | Al sheet 016 |
| Certification | SGS, BV | Place of Origin | China |
| High Light | aircraft grade aluminium sheet ，aircraft aluminum plate | ||
Ultra Hardness Aircraft Aluminum Sheet Metal Alloy 7xxx Series 7050 O T H Temper
Quick details:
| Aluminum grade | 7050 (2xxx, 5xxx, 6xxx, 7xxx series available) |
| Temper | T7451 (other temper: O H T available) |
| Length | ≤38000mm |
| Width | 200mm – 4300mm |
| Thickness | 6mm – 260mm |
| Surface | Degreased, anodized, mill finish,laminating,etc |
| Common alloy | 7050, 7075, 7475, 7175,7150, 7055 and etc. |
| Application | Aerospace, marine, automotive, railway transportation, oil and chemical industries etc. |
Details of 7xxx series alloy applied on the aerospace:
Aluminum alloy is used as aircraft material at early time. In the 1960s-1970s, 7xxx alloys often used T73 and T76 heat treatment system. But now, alloy 7050 and high purity alloy are often used. 7075 aluminum sheet belongs to the ultra-hard aluminum of Al - zinc - Mg – Cu. In the end of 1940s, alloy 7075 has been applied to aircraft manufacturing industry and is still widely used in aviation industry as deforming aluminum alloy of super high idensity. Its characteristic is that after solid solution treatment, the plasticity is remarkable and after heat treatment, the reinforcement effect is very obvious. Besides, if under 150 ℃, alloy 7075 has high intensity and the low temperature intensity is especially outstanding. However, it also has few shortages, like poor welding performance as well as the tendency of stress corrosion and cracking. The protective measures of covering a piece of aluminum on the surface and other schemes are essential to be taken. Two-stage aging can improve the ability of alloy to resist stress corrosion and cracking. Under the condition of annealing and quenching, the plasticity of 7050 is slightly inferior to the same state of 2A12 and is slightly superior to that of 7A04. The stress corrosion performance of alloy 7075 is better than that of 7A04 and among them, alloy 7075 T651 is top grade, which is honored as the most excellent products in aluminum alloy. The high intensity of 7075 is far more than mild steel. Most importantly, this alloy has good mechanical properties and anodizing reaction. It is a typical aircraft aluminum.
Characteristics of Aircraft Aluminum Sheet 7050:
7075- 0
Un-heat-treated 7075 (7075-0 temper) has maximum tensile strength no more than 280 MPa (40,000 psi), and maximum yield strength no more than 140 MPa (21,000 psi).
The material has an elongation (stretch before ultimate failure) of 9–10%. 7075-0 is highly corrosion-resistant combined with generally acceptable strength profile.
| Chemical Composition % of 7050 Aircraft Aluminum Sheet | |||||||||||
| Alloy No. | Si | Fe | Cu | Mn | Mg | Cr | Zr | Ti | Zn | Others | Al |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | 0.08-0.15 | 0.06 | 5.7-6.7 | 0.02 | Remainder |
Regular alloies of 7xxx series and application:
| Grade | Alloy | Temper | Parts of application |
|
7xxx | 7050 | O,T6,T651,T7451 | Stringer, wallboard of the undercarriage, cabin door frame, outer barrel, up supporting poles, anti-twisting arm, connecting rod, upper skin of aerospace vehicle, inner part of back wing, the main supporting joints, frame of passenger sightseeing window, strengthening frames wing beams, edge strip of keel beam , ventral sheet of keel beam, floor twist beam.
|
| 7075 | O,T6,T651 | ||
| 7A04 | T6,T651 | ||
| 7A09 | T6,T651 |
Typical features of alloy 7xxx series:
1.Ultra-hard aluminum
2. Super high idensity
3. High intensity and the low temperature intensity
4. Able to resist stress corrosion and cracking
5. Good mechanical properties and anodizing reaction
6. Remarkable plasticity and obvious reinforcement effect
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Importer,Exporter,Trading Company,Seller
Year Established:
2003
Total Annual:
2000000000-2500000000
Employee Number:
10~50
Ecer Certification：
Active Member
Rising International was established in 2003 with a registered capital of USD 25 million. For more than 15 years, Rising International has been recognized as a trusted partner and innovative aluminium producer and supplier at home and aboard, with a broad portfolio of quality aluminum prod... Rising International was established in 2003 with a registered capital of USD 25 million. For more than 15 years, Rising International has been recognized as a trusted partner and innovative aluminium producer and supplier at home and aboard, with a broad portfolio of quality aluminum prod...
Get in touch with us
Leave a Message, we will call you back quickly!