MAX489CPD Integrated Circuit Chip Low-Power Slew Rate Limited RS-485/RS-422

Product Specification

Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers

General Description

The MAX481, MAX483, MAX485, MAX487–MAX491, and MAX1487 are low-power transceivers for RS-485 and RS- 422 communication. Each part contains one driver and one receiver. The MAX483, MAX487, MAX488, and MAX489 feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, thus allowing error-free data transmission up to 250kbps. The driver slew rates of the MAX481, MAX485, MAX490, MAX491, and MAX1487 are not limited, allowing them to transmit up to 2.5Mbps.

These transceivers draw between 120µA and 500µA of supply current when unloaded or fully loaded with disabled drivers. Additionally, the MAX481, MAX483, and MAX487 have a low-current shutdown mode in which they consume only 0.1µA. All parts operate from a single 5V supply.

Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit.

The MAX487 and MAX1487 feature quarter-unit-load receiver input impedance, allowing up to 128 MAX487/ MAX1487 transceivers on the bus. Full-duplex communications are obtained using the MAX488–MAX491, while the MAX481, MAX483, MAX485, MAX487, and MAX1487 are designed for half-duplex applications.

Applications

Low-Power RS-485 Transceivers

Low-Power RS-422 Transceivers

Level Translators

Transceivers for EMI-Sensitive Applications

Industrial-Control Local Area Networks

Next Generation Device Features

♦ For Fault-Tolerant Applications

MAX3430: ±80V Fault-Protected, Fail-Safe, 1/4 Unit Load, +3.3V, RS-485 Transceiver MAX3440E–MAX3444E: ±15kV ESD-Protected, ±60V Fault-Protected, 10Mbps, Fail-Safe, RS-485/J1708 Transceivers

♦ For Space-Constrained Applications

MAX3460–MAX3464: +5V, Fail-Safe, 20Mbps, Profibus RS-485/RS-422 Transceivers MAX3362: +3.3V, High-Speed, RS-485/RS-422 Transceiver in a SOT23 Package MAX3280E–MAX3284E: ±15kV ESD-Protected, 52Mbps, +3V to +5.5V, SOT23, RS-485/RS-422, True Fail-Safe Receivers MAX3293/MAX3294/MAX3295: 20Mbps, +3.3V, SOT23, RS-855/RS-422 Transmitters

♦ For Multiple Transceiver Applications

MAX3030E–MAX3033E: ±15kV ESD-Protected, +3.3V, Quad RS-422 Transmitters

♦ For Fail-Safe Applications

MAX3080–MAX3089: Fail-Safe, High-Speed (10Mbps), Slew-Rate-Limited RS-485/RS-422 Transceivers

♦ For Low-Voltage Applications

MAX3483E/MAX3485E/MAX3486E/MAX3488E/ MAX3490E/MAX3491E: +3.3V Powered, ±15kV ESD-Protected, 12Mbps, Slew-Rate-Limited, True RS-485/RS-422 Transceivers

ABSOLUTE MAXIMUM RATINGS

Supply Voltage (VCC).............................................................12V

Control Input Voltage (RE, DE)...................-0.5V to (VCC + 0.5V)

Driver Input Voltage (DI).............................-0.5V to (VCC + 0.5V)

Driver Output Voltage (A, B)...................................-8V to +12.5V

Receiver Input Voltage (A, B).................................-8V to +12.5V

Receiver Output Voltage (RO).....................-0.5V to (VCC +0.5V)

Continuous Power Dissipation (TA = +70°C)

    8-Pin Plastic DIP (derate 9.09mW/°C above +70°C) ....727mW

    14-Pin Plastic DIP (derate 10.00mW/°C above +70°C) ..800mW

    8-Pin SO (derate 5.88mW/°C above +70°C).................471mW

    14-Pin SO (derate 8.33mW/°C above +70°C)...............667mW

    8-Pin µMAX (derate 4.1mW/°C above +70°C) ..............830mW

    8-Pin CERDIP (derate 8.00mW/°C above +70°C).........640mW

    14-Pin CERDIP (derate 9.09mW/°C above +70°C).......727mW

Operating Temperature Ranges

    MAX4_ _C_ _/MAX1487C_ A ...............................0°C to +70°C

    MAX4_ _E_ _/MAX1487E_ A.............................-40°C to +85°C

    MAX4_ _MJ_/MAX1487MJA ...........................-55°C to +125°C

Storage Temperature Range .............................-65°C to +160°C

Lead Temperature (soldering, 10sec) .............................+300°C

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Figure 1. MAX481/MAX483/MAX485/MAX487/MAX1487 Pin Configuration and Typical Operating Circuit

Figure 2. MAX488/MAX490 Pin Configuration and Typical Operating Circuit

Figure 3. MAX489/MAX491 Pin Configuration and Typical Operating Circuit