Three-in-one Small Beverage Production Line Drinks Automatic Pet Bottle Filling

Product Specification

We can provide a complete juice production line
A separate machine can also be provided.

First, the structure and characteristics:
This machine introduces international advanced technology, combined with the characteristics of the domestic market, developed a fully automatic PET bottle beer washing and filling capping three-in-one machine, using stainless steel elastic clip bottle mouth rotary device, wear-resistant filling head, low loss seal The cover head, flushing, filling and capping are carried out simultaneously. The equipment has a compact structure and reasonable process. It is suitable for all kinds of PET bottles of 250-1500ML, and the products have reached the international advanced level of similar products.
1. Flushing device: The bottle cap and bracket are made of stainless steel. The rotation of the clip is controlled by a transition device placed at the nozzle below the mouth of the bottle. Sealing materials in contact with the product are food grade ozone resistant materials. The solenoid valve controls the supply of water to the bottle, and the water pressure of the bottle can reach 0.25-0.30 kg, and the bottle splash-proof device is washed.
2. Filling device: All stainless steel structure: The filling valve is made of SUS316L. The internal structure of the base, the drive device with shifting action, and the star drive gear. The structure is on the base, the bottle transports the star wheel, the transmission, the filling part, the cover part; the filling valve has a guide. Avoid wear to the ring; Glyd ring and O-type silicone sealing ring, good sealing performance and fast filling speed.
3, capping device: based on the famous Italian AROL capping machine technology to improve the design of the bottle feeding is guided by the filling machine star wheel device.
4. Capper: The capper is fixed on the upper part of the body assembly and driven by a separate motor. During operation, the motor drives the circular cone to rotate, and the messy stacked caps are arranged in a certain order through special channels. A tongue-shaped plate is arranged at the outlet of the passage, and the function is to remove the back cover from the passage, and use the blower to cover the back cover and blow back to the silo, and rearrange to ensure the cap from the capper. They are all covered.
5, transmission system: the use of large gear direct transmission, smooth operation, good position, maintenance, maintenance is convenient.
6. Control and protection: The motor is controlled by the frequency converter to adjust the running speed. All the key parts, such as the star wheel and the gear, are equipped with micro sensors. If there are no bottles, bottles or covers, then there are faults. A sensor transmits the signal to the master and causes the machine to stop automatically.
7. Material: Stainless steel is made of Japanese SUS304L and A3 and 45 cast steel. The electrical configuration is shown in the attached table. PLC inverter Japan Mitsubishi, contactor Siemens, photoelectric switch Korea.
8, pneumatic components: Ya Deke and Kang Maosheng.
9. The hanging air conveying mechanism is adopted, and the bottle shape is not required to be changed.

The main technical parameters:
1, the number of stations: wash bottle 16, fill 12, cover 6
2, rated production capacity: 2000 ~ 4000 BPH (500ml)
3, rinse bottle water pressure: 0.2 ~ 0.25 Mpa
4, water consumption of washing bottles: 0.6 ~ 0.8 tons / hour
5, filling method: micro negative pressure filling
6, filling temperature: 60C--95oC
7, air source pressure: 0.5 ~ 0.7Mpa
8, gas consumption: 0.4 ~ 0.6M3 / min
9, the main motor power: 3.0KW
10, the total motor capacity: 5.65KW
11, rated voltage: three-phase 380V / 50HZ
12, the host dimensions: 2450 × 1850 × 2550 (length × width × height)
13, weight; 3250Kg