DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | Five sets per month |
| Delivery Time | 5-8 work days |
| Packaging Details | Wooden case |
| Equipment name | Thermal Insulation Rubber Maximum Service Temperature Test Machine |
| Standard | ASTM C411-82 |
| Test furnace size | L2245 × W1500 × H1600（mm） |
| Warranty | 12 months |
| Heating plate | SUS304 stainless steel |
| Test Area | 900 * 450mm |
| Brand Name | Daxian |
| Model Number | DX8359A |
| Certification | ASTM C411-82 |
| Place of Origin | China |
View Detail Information
Explore similar products
High Voltage Track And Erosion Resistance Tester IEC60587
Solar PV Energy Cables IPT Automatic High Voltage Tracking Index Rubber Test
IEC 60587 Rubber Plastic Testing Equipment AC 220V 50HZ Corrosion Resistant
ASTM D2303 Rubber Testing Equipment High Voltage Tracking Index Tester
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | Five sets per month |
| Delivery Time | 5-8 work days | Packaging Details | Wooden case |
| Equipment name | Thermal Insulation Rubber Maximum Service Temperature Test Machine | Standard | ASTM C411-82 |
| Test furnace size | L2245 × W1500 × H1600（mm） | Warranty | 12 months |
| Heating plate | SUS304 stainless steel | Test Area | 900 * 450mm |
| Brand Name | Daxian | Model Number | DX8359A |
| Certification | ASTM C411-82 | Place of Origin | China |
| High Light | SUS304 Temperature Test Machine ，Thermal Insulation Rubber Temperature Test Machine ，ASTM C411-82 Temperature Test Machine | ||
Thermal Insulation Rubber Maximum Service Temperature Test Machine ASTM C411-82 Standards
Scope of application:
It is applicable to the evaluation of the maximum service temperature of thermal insulation products such as loose filled thermal insulation materials, felt, blanket, block, plate and prefabricated thermal insulation pipe shell.
Standard:
ASTM C411-82
ASTM C447-85
ASTM C411-82
ASTM C447-85
ISO 8142: 1990 catalogue A.
Main technical parameters:
1. Heating plate: made of SUS304 stainless steel, test area 900 * 450mm, protective layer around, width 80mm. On the lower surface of the heating plate, at least five thermocouples shall be used to measure the surface temperature, four of which shall be fixed on the diagonal of the heating area of the heating plate, and the distance from each corner shall be 150 mm. The fifth thermocouple shall be placed in the center of the heating plate. The temperature measured at any point shall not be lower than the required temperature, and the difference shall be+5% or+15 ℃, whichever is smaller.
2. Heating pipe: made of SUS304 stainless steel, with a length of 2M and nominal diameters of 88mm, 108mm and 133mm respectively. The three heating pipes are arranged side by side, and the prefabricated insulation pipe shell can be tested separately. The end of the heating pipe shall be provided with a protective section and an auxiliary heater no less than 75mm long to prevent excessive heat loss at the end of the test piece. A thermocouple shall be installed every 0.3m of the heating pipe to measure the surface temperature of the heating pipe. The thermocouples are arranged around the heating tubes in a spiral shape at 90 ° intervals. The temperature measured at any point shall not be lower than the required temperature, with a difference of+5% or+15 ℃ (whichever is smaller).
3. Temperature measurement system: thermocouple wire with diameter of 5.0mm
4. Measuring temperature: 0-500, 0-900, 0-1250 ℃ (optional); PLC+module is used to collect temperature.
5. Control part: PLC module is adopted, and microcomputer control is used to display the temperature curve of hot surface in real time and output the report.
6. Temperature acquisition: once every 2min and displayed by curve;
7. Response time of thermocouple:<0.5s
8. Temperature error: ± 0.5 ℃
9. Timing error: 1s/h
10. Computer: one set of computer (at least meeting the following requirements: first-line brand computer; CPU: INTEL I5-III or above; memory: 4G or above; hard disk: 500G or above; with serial port: controlling instrument operation; display: LED liquid crystal display above 20 inches, 1600 * 900 resolution or above; windows xp system), A printer. A set of test software.
11. Equipped with a flat ruler and a feeler gauge: measure the warpage.
12. Two sample tanks are provided
13, Product features: CNC machine tools are used for processing and forming, and the arc shape is beautiful and generous. It has the characteristics of beautiful, rust proof and anti-corrosion. Other parts are made of 45 # steel with thickened plated/SUS304 stainless steel surface.
| Test furnace size | L2245 × W1500 × H1600(mm) |
| Control box size | L500 × W500 × H1200 (mm) |
| Heating rate | 5 ℃/min or 3 ℃/min can be set |
Company Details
Business Type:
Manufacturer
Year Established:
2004
Total Annual:
8,000,000-10,000,000
Employee Number:
150~200
Ecer Certification：
Verified Supplier
Daxian is a professional manufacturer of Building materials/ Wire/ Plastics/ Rubber Fire retardant testing equipment 1. Fire Testing Equipment 2. Building Material Fire Tester 3. Wire and Cable Fire Tester 4. Environmental Test Chamber 5. Textile Testing Equipment ... Daxian is a professional manufacturer of Building materials/ Wire/ Plastics/ Rubber Fire retardant testing equipment 1. Fire Testing Equipment 2. Building Material Fire Tester 3. Wire and Cable Fire Tester 4. Environmental Test Chamber 5. Textile Testing Equipment ...
Get in touch with us
Leave a Message, we will call you back quickly!