shenzhen J & M Machine Tools Co., Ltd.
| Payment Terms | L/C, T/T |
| Delivery Time | 30 DYAS |
| Capacity | 1.5 Ton |
| Min. Height | 90 mm |
| Max Height | 358 mm |
| Product Size | 595x295x180 mm |
| N.W./G.W. | 14.3/15.6 kg |
| QTY/20'CY | 950 PCS |
| Brand Name | J&M |
| Model Number | T830011L |
| Place of Origin | China |
View Detail Information
Explore similar products
SC12000XW-1 Truck Garage Equipment 12000lbs Automatic Braking Action
Heavy Duty Electric Winch 12000lbs SC12000X Hawse Fairlead Φ10mmx26m Rope
32 Ton Capacity Welded Bottle Jacks Houses And Building Structures
Remote Switch Electric Truck Winch 20000lbs CE approved S20000T
Product Specification
| Payment Terms | L/C, T/T | Delivery Time | 30 DYAS |
| Capacity | 1.5 Ton | Min. Height | 90 mm |
| Max Height | 358 mm | Product Size | 595x295x180 mm |
| N.W./G.W. | 14.3/15.6 kg | QTY/20'CY | 950 PCS |
| Brand Name | J&M | Model Number | T830011L |
| Place of Origin | China | ||
| High Light | welded bottle jacks ，hydraulic trolley jack | ||
1.5 Ton Aluminum Jacks Wide Stance Provides Stability Under Load
1.5 Ton Aluminum Jacks
• Safety overload system to prevent use beyond rated capacity.
• Wide stance provides stability under load.
• Built with high strength aircraft grade aluminum.
• Foam bumper on handle to prevent damage to vehicle finish.
1. When lifting heavy weights, the mandril fails to rise to the maximum route. When the jack reaches a certain height, and the maximum route is not reached, the mandril cannot rise up any more, which indicates that there is a lack of working oil in the jack, and it should be replenished.
2. The mandril wobbles while rising. Generally the oil return valve is not closed tightly; we can tighten oil return valve needle in counterclockwise direction. If it is still unstable, check whether there is any oil leakage around the pressure rod; if the oil leaks, it indicates that the seal ring of the mandril is damaged, and it should be replaced. If there is no oil leakage, confirm again whether the oil return valve and the inlet valve is already locked, and also check sealing gasket conditions in the cylinder end joint of pressure rod; if all the above is normal, then it indicates that the seal ring is damaged, or the fixed screw is loosening, we should replace it or tighten the screw.
3. The mandril fails to rise while no-load. First check the oil amount of the jack, and we should add oil when insufficient. If jack is not short of oil, we can loosen the oil return valve needle of the jack, remove the oil plug of oil filling port, then trample on the jack base by our feet, repeatedly pull up the mandril and press down again by our hands for several times, in order to exhaust air; after the above actions are completed, tighten the oil plug of oil filling port and oil return valve tightly, and then try again the no-load mandril; if the mandril still cannot rise, lay jack flat, remove the oil return valve, check whether the valve and seat contact well; if there is dirt, it should be removed; if there is pit, slot and uneven, it should be replaced. Finally check whether the oil inlet valve is well sealed and the sealing ring of mandril is damaged or falls off. If any, replace it in time.
4. Oil leakage, can be seen by visual observation. The oil leakage area of the jack is usually in the base and the cylinder joint, around the mandril, in the lock thread of the oil return valve, in the fixed oil plug of the oil filling port, around pressure rod etc. The cause of oil leakage is usually the damage of sealing gasket, it must be replaced in time.
Company Details
Business Type:
Seller
Year Established:
2012
Total Annual:
3000000-4000000
Employee Number:
100~200
Ecer Certification：
Site Member
Right Products for Your Demand! Reliable Partner for Your Cooperation! J & M Machine Machine Tools Co. Ltd., has more than 8 years experience specialized in supplying high level industrial and mechanical products. The company is based in Hongkong and Shenzhen, and through cooperati... Right Products for Your Demand! Reliable Partner for Your Cooperation! J & M Machine Machine Tools Co. Ltd., has more than 8 years experience specialized in supplying high level industrial and mechanical products. The company is based in Hongkong and Shenzhen, and through cooperati...
Get in touch with us
Leave a Message, we will call you back quickly!