Foam Skid Balanced Pressure Proportioning System Fire Fighting Equipment

Product Specification

Fire Fighting Balanced Pressure Proportioning System Foam Skid

Fire Fighting Balanced Pressure Proportioning System Foam Skid

Introduction

The foam pump proportioning system is the unit to supply foam solution for foam system. It is especially applicable to petrochemical enterprises, oil depots, wharfs and drilling platforms. The system mainly consists of atmospheric foam tank, foam pump, power unit, balance valve, foam proportioner, control valves and control system.

Principle

When a fire happens, fire water pump be started. Pressure and flow of fire water will be feed back to balance valve. Foam and water will be mixed in foam proportioner to get foam solution. If the pressure and flow from fire water changed, balance valve will adjust its opening degree to adjust the flow of foam, reaching a dynamic equilibrium to guarantee an accurate mixing ratio. Atmospheric foam tank can be refilled even when the system is under operating, which prolongs the working time.

Hydraulic Turbine Drive Foam Pump Proportioning System

The hydraulic turbine drive foam pump proportioning system relies on a hydraulic turbine to drive the foam pump. Hydraulic turbine generates a rotation by pressurized water to drive the foam pump, no other extra power is needed.

Parameters

INSTALLATION

1. Build a foundation for both the skid and foam tank. The two foundations should be in an equivalent elevation.

2. Mount the skid and foam tank on their respective foundations with anchor bolts.

3. Connect foam tank foam outlet with skid foam inlet by flexible pipe.

4. Full Fill foam tank with foam concentrate from foam reflux inlet, then connect foam tank foam reflux inlet with skid foam reflux pipe by stainless steel pipe.

OPERATION

1. Keep wash valve closed and open all other manual valves

2. Start fire water pump to supply pressurized water for this system.

3. Press the "foam inlet valve open" button (green color) on control box to allow foam get into the system.

4. Press the "hydraulic turbine valve open" button (green color) on control box to start the hydraulic turbine. System will be under operating by now.

5. Press the "foam inlet valve close" button (red color) to stop the foam getting into the system.

6. Open the manual wash valve to allow water get into the system. Keep the fire pump running for several minutes to wash the system with fresh water.

7. Press the "hydraulic turbine valve close" button (red color) to stop the hydraulic turbine.

8. Stop fire water pump to stop water supply.

9. Close all manual valves on the skid to set it into standby condition.

Company Information:

With a history of more than 20 years, Shenzhen Winan Industrial Development Co. Ltd. is a professional manufacturer and exporter who are focusing on designing, developing and manufacturing all kinds of Fire fighting equipment. The company now has a large area of industrial workshops of more than 10000 square meters, located in Shenzhen, China, with convenient transportation access.

All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction. As a result of our high quality products and outstanding customer service, we have gained a global sales network around the world.

Certificates:

All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction. As a result of our high quality products and outstanding customer service, we have gained a global sales network around the world.

FAQ:

1. Do you offer free sample for your clients?

?????Yes, we can offer you free sample.

2. What's the MOQ of your products?

?????MOQ is ONE pcs/set.

3. Are you manufacturer with your own factory?

?????Yes, we are the manufacturer for more than 20 years

4. What's your?payment terms?

?????We accept T/T, L/C, Western Union, Paypal,etc.

5. How long is the?delivery time?

?????Usually around 15 days after payment.

6.?Can you accept OEM?

????Yes, we do customized design for our clients.