Changzhou huituo technology co.,ltd.
| Delivery Time | 15-60 days |
| Packaging Details | Wooden case |
| Payment Terms | TT/LC |
| Supply Ability | 30set/month |
| Voltage | 220V/380V,Customer's Requirement,380V/50Hz |
| Condition | New |
| After-sales service provided | Engineers available to service machinery overseas,Online support |
| Applicable materials | dishwashing liquid,laundry detergent |
| Capacity | 70bpm |
| Applicable bottle capacity | 600-1000ml |
| Brand Name | HUITUO |
| Model Number | SFL |
| Place of Origin | China |
| Certification | CE,ISO |
View Detail Information
Explore similar products
Fully Automatic Detergent Bottle Filling Machine For Laundry Liquid
Rust Prevention 2.2KW Disinfection Liquid Filler
Huituo disinfection fluid flowmeter filling machine with higher filling accuracy
Antiseptic Fluid Filling Machine
Product Specification
| Delivery Time | 15-60 days | Packaging Details | Wooden case |
| Payment Terms | TT/LC | Supply Ability | 30set/month |
| Voltage | 220V/380V,Customer's Requirement,380V/50Hz | Condition | New |
| After-sales service provided | Engineers available to service machinery overseas,Online support | Applicable materials | dishwashing liquid,laundry detergent |
| Capacity | 70bpm | Applicable bottle capacity | 600-1000ml |
| Brand Name | HUITUO | Model Number | SFL |
| Place of Origin | China | Certification | CE,ISO |
| High Light | Explosion Proof Pneumatic Filling Machine ，Disinfectants Pneumatic Filling Machine ，Hand Sanitizer Pneumatic Filler | ||
This machine adopts Siemens programmable controller (PLC), man-machine interface, servo control system, low voltage components for control, touch screen operation, stable and reliable work, easy operation, high production efficiency, wide application range and so on.
This machine is mainly composed of control system, conveying device, photoelectric detection, feeding device, material box, liquid level control device, filling device, diving device, bottle holding device, bottle blocking device, etc.
| 1 | Applicable bottle | Flat/cylinder |
| 2 | Cap specifications | Customized |
| 3 | Number of caps | 12 |
| 4 | Air source | 0.4~0.6MPa clean and stable air source |
| 5 | Speed | ≤4,200bph can be customized |
| 6 | Power supply | AC 380V/220V 50/60 Hz |
| 7 | Weight | About 3,000 kg |
| 8 | Dimensions | 2200 × 1400 × 3000 (L × W × H) mm |
The parts of the changeover design are divided into adjustment parts, the position adjustment parts of the upper and lower feed nozzles of the following submersible part, and the part involving the changeover parts is the bottle-stop part.
The position adjustment part of the filling nozzle only needs to be adjusted horizontally according to the bottle when changing production. For the bottle-stop part, the bottle-struck part will be adjusted horizontally and the height of the bottle-stop part needs to be adjusted up and down. Adjust the height to make the bottle-struck part at the bottle mouth position.
SFL-12 uses pneumatic components to push the piston rod for filling, and the filling volume change requires replacement of the production limit element.
The filling machine has the function of under-touch bottle protection. To ensure the normal use of this function, the filling nozzle needs to be able to move smoothly in the fixed seat. Therefore, it is necessary to regularly add appropriate grease to the inner hole of the filling nozzle fixed seat.
| Fault | Reason | Method |
| Cannot start | 1."Emergency Stop" button was pressed | 1. Reset the "emergency stop" button |
| The solenoid valve is not open | 2. Open the solenoid valve in the electrical box | |
| Insufficient air pressure | 3. Check the air source | |
| The filling nozzle is not reset | 4. Reset the filling nozzle | |
| The machine is in manual state | 5. Change to automatic state | |
| 6.The lower limit protection sensor position of the filling is wrong | 6. Adjust the sensor position in place | |
| Automatic shutdown | Insufficient air pressure | Check the air source |
| Large measurement error | Not enough materials in the tank | Ensure that the feeding system is unblocked |
| Material has impurities | 2. Remove impurities | |
| The filling volume parameter is set incorrectly | 3. Adjust the set value | |
| Failure of filling control valve | 4.Find out the cause, repair or replace | |
| Insufficient air pressure | 5. Check the air source | |
| The filling nozzle is not filled | 1. The filling nozzle is closed | 1. Open the filling nozzle in the touch screen |
| 2.The filling solenoid valve is damaged | 2. Replace the filling solenoid valve | |
| 3. The filling control valve is damaged | 3. Replace the filling control valve | |
| 4.The leaking stoppage control valve is not open | 4. Find out the cause, repair or replace | |
| 5.Insufficient number of bottles | 5. Supply enough bottles | |
| Discharge tube disconnected | The leaking stoppage control valve is not open | 1. Find out the cause, repair or replace |
| Too fast filling speed | Reduce filling motor speed |
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2010
Total Annual:
2.5 Million-5 Million
Employee Number:
51~100
Ecer Certification：
Active Member
Focusing on Development, Packaging Industry Leader Since its establishment, HuiTuo has set up customer-centric R&D, manufacturing, marketing and sales system. As one of the world leading intelligent capping and smart packaging manufacturers, HuiTuo is committed to meeting the indu... Focusing on Development, Packaging Industry Leader Since its establishment, HuiTuo has set up customer-centric R&D, manufacturing, marketing and sales system. As one of the world leading intelligent capping and smart packaging manufacturers, HuiTuo is committed to meeting the indu...
Get in touch with us
Leave a Message, we will call you back quickly!