Simplex 3.0mm LSZH Fiber Optical Jumper 50/125 LC UPC-LC UPC OM3

Product Specification

Fiber Optical Jumper 50/125 LC UPC-LC UPC OM3 Simplex 3.0mm LSZH

1. Fiber Patch Cord Basic Introduction:

LC-LC fiber optical jumper is a popular product with a spiral stainless steel strip on the fiber for excellent kink and compression resistance. The rugged outer jacket protects the cable in the data center space. Better work inside and in harsh environments. 

Our Fiber Optical Jumpers are designed to provide you with everything you need to set up your fiber optic network, from cables, patch panels, termination boxes, and cleaning supplies. Our fiber optic cables are available with combinations of LC, SC, ST, FC, MTP/MPO, and MTRJ connectors and come in 1, 2, 3, 5, 7, 10, and 15-meter lengths. We also offer OM3 cables up to 30 meters and OM4 up to 100 meters.

2. Fiber Optic Jumper  Benefit & Features:

• Standard Telcordia Gr-326-Core
• Low insertion loss
• High return loss
• High temperature stability
• Clean and Scratch-Free End Face
• High Quality 100% Factory Tested
• Strong environmental adaptability
• High cost-effectiveness
• Quantity discounts available

3. Fiber Optic Jumper Applications:

• Fiber Optic CATV, Lan Systems
• Optical Network Equipment
• Optical Fiber Communications
• Optical Test Equipment
• Industry and Military Application
• Access Network, Telecom, Gigabit Data Network

4. Specification&Technology Parameters

5. Ordering Information 

Ordering information

6.  Fiber Connector Options Available

-- LC Custom fiber optic jumper options include.
-- LC/PC (Physical Contact) Polish
-- LC/UPC (Ultra Physical Contact) polish
-- LC/APC (Angled Physical Contact) polish

Jacket: Riser (OFNR), Plenum (OFNP), Low Smoke Zero Halogens (LSZH), PVC

Diameter: 0.9mm (900µm), 1.6mm, 1.8mm, 2.0mm, 3.0mm

Jacket Colors: Aqua, Orange, Green, Red, Blue, Gray, Black, Yellow
LC Multimode 62.5/125µm MMF Fiber (Corning Fiber Optic Cable)
LC Multimode 50/125µm MMF OM2 Fiber (Corning Fiber Optic Cable)
LC Multimode 50/125µm MMF OM3 10Gb Laser Optimized Fiber (Corning Fiber)
LC Simplex cables or LC Duplex Cables are also available in optional colors.
LC Standard boot, LC 45° angled boot, LC 90°angled boot, or short boot options.
Corning Fiber Optic Cable, or Fiber One Fiber.
Call us today to speak with one of our qualified salespeople to help answer any questions.

7.How to choose Fiber patch cords?

1) Fiber Cable Mode: Single Mode or Multimode

The mode of fiber patch cables indicates how light beams travel within the fiber. There are two fiber cable modes: single mode and multimode.

2) Number of Fiber Strands: Simplex or Duplex

According to the number of fiber strands, there are simplex and duplex fiber patch cord. As shown in Figure 2, simplex fiber patch cord contains one single strand of fiber with one simplex connector on each end. It can be linked with a pair of BiDi transceiver modules featuring with one port. Whereas duplex fiber patch cord consists of two strands of glass or plastic with one duplex connector (or considered as two simplex connectors). It is often linked with common transceivers or dual fiber BiDi transceivers.

3. Choose the Right Cable Jacket Type (PVC/LSZH/OFNP/Armored)
Usually, there are three cable jacket types: Polyvinyl Chloride (PVC), Low Smoke Zero Halogen (LSZH) and Optical Fiber Nonconductive Plenum (OFNP). You can see there features in figure below and choose the right one for your network.

4. Connector Type: LC, SC, ST or Others

There are many connector types used in fiber patch cables such as LC, SC, ST, MTP or MPO listed in this article How Many Fiber Connector Types Do You Know? Aside from these connectors, there is a latest connector design called MDC connector, which enables the highest achievable connector density by delivering a 3X advantage over a standard LC connector. The different connector types are to plug into different interfaces, so you’d better affirm the interface type of the devices you are using the first time.

5. Choose the Right Connector Polish Type (UPC/APC)
Since the loss of the APC connector is lower than UPC connectors, usually, the optical performance of APC connectors is better than UPC connectors. In the current market, the APC connectors are widely used in applications such as FTTx, passive optical network (PON) and wavelength-division multiplexing (WDM) that are more sensitive to return loss. But APC connector is usually expensive than UPC connector, so you should weigh the pros and cons. With those applications that call for high precision optical fiber signaling, APC should be the first consideration, but less sensitive digital systems will perform equally well using UPC. Usually, connector color of APC patch cable is green, and of UPC patch cable is blue.

8. Fiber Optic Patch Cord Workshop