96 Fibers MPO Fiber Patch Panel With MPO Cassette For MPO - LC Optical Patch

Product Specification

96 Fibers MPO Fiber Patch Panel With MPO Cassette For MPO - LC Optical Patch Cord

To build a good optical fiber wiring system in the data center, the basic requirements of the data center wiring must be clearly defined. As we all know, optical fiber jumpers play an important role in the interconnection of network devices in data centers. Therefore, managing and protecting fiber optic jumpers are the basis for ensuring the normal operation of data centers. In general, data center wiring must meet the following three requirements: 1, save space: the space of data center is limited, but the trend of network expansion is unlimited. To improve the data rate of data center, it is necessary to add various kinds of network devices and cables. It is difficult to control the size of network devices. Therefore, we can only hope to build an ultra high density wiring system to save data center space. 2, easy installation and maintenance: the installation and maintenance of large cabling system is a time-consuming and costly work. In order to minimize the cost of data center construction and operation, the wiring system must have the characteristics of easy installation and maintenance. 3, flexibility and strong management: the high density wiring system is not immutable and frozen, we will change or add some fiber link at any time according to the specific needs, which requires wiring system can conveniently and effectively adapt to various changes in fiber link, has strong flexibility and manageability.

The fiber patch panel (fiber distribution box) is one of the most common cable management products, and in the future it will also be the breakthrough of ultra high density wiring. Fiberall’s MPO cassette (LGX box) and MPO fiber patch panel is one of these cable management products.

The modern data center is facing the problem of upgrading from traditional 10G network to 40/100G network. Therefore, the connection between 10G network devices and 40/100G devices plays an important role in the wiring system of data centers. We usually use MPO/MTP-LC branch fiber optic jumper to achieve this connection. In addition, modularized MPO-LC branch optical fiber patch cord can better meet the requirement of data center saving space and convenient management. Please feel free to contact Fiberall if you need help on MPO box, MPO patch panel.

Product Parameters Of MPO-LC Fiber Optic Patch Panel

Product Characteristics Of MPO Fiber Patch Panel

1, Inside the MPO cassette, it provides torsion for the optical fiber connection (AB/BA) and it also support direct connection module (AB/AB);

2, The MPO trunk connection port is fixed to the rear of the MPO cassette;

3, Standard 19" width can be installed on all kinds of optical cabinet;

4. The MPO cassette is very convenient for plug and unplug;

5, There is dustproof ring on the cable input, it is a good role in dust prevention, the fiber cable can be inserted as long as the dust ring is broken;

6, The structure of the MPO patch panel is firm and the assembly is with consistency and interchangeability, and there is no loose with the fasteners;

7, All sharp edges are processed with grinding treatment to ensure safe operation.

8, With smooth spraying surface, uniform color, no flow, no exposure; metal corrosion without burr;

9, With enough storage space inside the MPO patch panel for remaining optical fiber.