Fiberall Technology (Shenzhen) Co., Ltd
| Payment Terms | L/C,T/T,Western Union, MoneyGram,PayPal |
| Delivery Time | 3-5 days |
| Packaging Details | Blister Box/Carton |
| Product name | SFP optical transceiver |
| Module encapsulation | SFP |
| Fiber port | LC |
| SM fiber | 8.3/125, 8.7/125, 9/125, 10/125um |
| Transmitting rate | 155Mbps |
| Transmission distance | Up to 20KM, 40KM, 80KM |
| Power supply | 3.3V |
| Hot-Pluggable | Support |
| Brand Name | Fiberall or OEM |
| Model Number | FA-TCS01L13-20D/40D/80D |
| Certification | CE,FCC, ROHS |
| Place of Origin | China |
View Detail Information
Explore similar products
1000BASE - T SGMII Copper Sfp Optical Module With RJ45 For Gigabit Ethernet
10 Gigabit Copper SFP+ Fiber Optic Transceiver With RJ45 Plug 10GBASE-T SFP+
BIDI Long Haul SFP Optical Transceiver LC Single Mode Fiber 1.25G 80KM
1.25G Compatible SFP Transceiver , Dual Fiber Optical Transceiver Module With LC
Product Specification
| Payment Terms | L/C,T/T,Western Union, MoneyGram,PayPal | Delivery Time | 3-5 days |
| Packaging Details | Blister Box/Carton | Product name | SFP optical transceiver |
| Module encapsulation | SFP | Fiber port | LC |
| SM fiber | 8.3/125, 8.7/125, 9/125, 10/125um | Transmitting rate | 155Mbps |
| Transmission distance | Up to 20KM, 40KM, 80KM | Power supply | 3.3V |
| Hot-Pluggable | Support | Brand Name | Fiberall or OEM |
| Model Number | FA-TCS01L13-20D/40D/80D | Certification | CE,FCC, ROHS |
| Place of Origin | China | ||
| High Light | optical transceiver module ，fiber optic transceiver module | ||
FA-TCS01L13-20D/40D/80D, 155M SFP Optical Fiber Transceiver Module Distance 20KM To 80 Kilometers LC DX
Digital signal quality of fiber optic transceiver can be measured through the analysis of the eye diagram. Quality of digital signal including amplitude stability, intersymbol interference, signal distortion, light reflection, extinction ratio, jitter, overshoot and relaxation oscillation noise, modulation circuit, etc.
Opening degree and eyelid thickness in the center of the eye diagram reflect allowable tolerance of intersymbol interference, dispersion and extinction ratio, amplitude stability, rough measurement of overshoot and oscillation, light reflex and noise.
Upper and lower sides of the eye diagram reflects bandwidth and circuit matching information. The steepness reflects bandwidth, line roughness reflect the circuit matching information, but excessive steepness is easy to produce dispersion phase modulation and cross phase modulation; Extinction ratio is best when upper and lower sides intersection of the eye diagram is in 50%, but the pulse width will be broadened in the optical signal transmission process, cross point will be moved up relative to the sending side. In order to facilitate long distance transmission, and ensure that cross point ratio of receiver side is around 50, and make sensitivity of receiver side to be best, we generally suggest intersections should be moved slightly downward at the sending side. General suggest cross point ratio of transmission side to be control at 40%~45%.Thickness of the cross point of the eye diagram reflects the degree of jitter.
Features Of FA-TCS01L13-20D/40D/80D
Up to 155Mbps Data Links
Multi-Source Package with Duplex LC Connector
Compliant with ITU-T G.957, G.958
Eye safety meet laser Class1 requirement and compliant with IEC60825-1
Single +3.3V power supply
Support Hot-Pluggable
RoHS compliant is available
Monitoring Interface Compliant with SFF-8472
Electrical and Optical Characteristics: (Condition: Ta=TOP)
| Parameter | Symbol | Min. | Typical | Max. | Unit |
| Transmitter Differential Input Volt | +/-TX_DAT | 200 | 1600 | mV p-p | |
| Supply Current | ICC | 200 | 250 | mA | |
| Tx_Disable Input Voltage – Low | VIL | 0 | 0.8 | V | |
| Tx_Disable Input Voltage – High | VIH | 2.0 | Vcc | V | |
| Tx_Fault Output Voltage – Low | VOL | 0 | 0.8 | V | |
| Tx_Fault Output Voltage – High | VOH | 2.0 | Vcc | V | |
| Receiver Differential Output Volt | +/-RX_DAT | 400 | 1400 | mV p-p | |
| Rx_LOS Output Voltage- Low | VOL | 0 | 0.8 | V | |
| Rx_LOS Output Voltage- High | VOH | 2.0 | Vcc | V |
| Transmitter | ||||||||
| Parameter | Symbol | Min. | Typical | Max. | Unit | |||
| Data Rate | B | - | 155 | - | Mb/s | |||
| Output Center Wavelength | λC | 1260 | 1310 | 1360 | nm | |||
| Output Spectral Width | △λ | - | - | 4 | nm | |||
| Average Output Power | Po | -15 | -8 | dBm | ||||
| Extinction Ratio | E.R. | 10 | - | - | dB | |||
| Data Input Voltage-High | VIHS | Vcc-1.16 | - | Vcc-0.89 | V | |||
| Data Input Voltage -Low | VILS | Vcc-1.82 | - | Vcc-1.48 | V | |||
| Supply Current | ICC | - | 90 | 110 | mA | |||
| Output Optical Eye | Compliant with ITU-T G.957 | |||||||
| Receiver | ||||||||
| Parameter | Symbol | Min. | Typical | Max. | Unit | |||
| Receive Sensitivity | Pmin | - | - | -36 | dBm | |||
| Maximum Input Power | PMAX | -3 | - | - | dBm | |||
| Signal Detection-Asserted | PH-L | -47 | - | - | dBm | |||
| Signal Detection-Deserted | PL-H | - | - | -37 | dBm | |||
| Operating Wavelength | λc | 1100 | - | 1600 | nm | |||
| Supply Current | ICC | - | 80 | 110 | mA | |||
Company Details
Business Type:
Manufacturer
Year Established:
2007
Total Annual:
2000000-3500000
Employee Number:
100~120
Ecer Certification：
Active Member
Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; mainte... Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; mainte...
Get in touch with us
Leave a Message, we will call you back quickly!