Shenzhen Chuanglixun Optoelectronic Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 50 set/week |
| Delivery Time | 5-8 work days |
| Packaging Details | Pe bag + outer box, or customized requirements |
| Product name | Semi fiber injection machine |
| Application | Optical fiber epoxy injection |
| Power Supply | 110VAC+/-11VAC 50Hz ; 220VAC+/-22VAC 50Hz |
| Weight | 2.2 kg |
| Size | 235mmX225mmX63mm |
| Key Selling Points | Easy to Operate |
| Brand Name | CLX |
| Model Number | CLX-DJ02 |
| Place of Origin | Guangdong,China |
View Detail Information
Explore similar products
Automatic Fiber Patch Cord Manufacturing Machine
2000N Fiber Patch Cord Tensile Strength Testing Machine LC SC E2000
400X High Clarity 3W Fiber Patch Cord Manufacturing Machine Fiber Optic Endface
0.5s Fiber Patch Cord Manufacturing Machine Optical Cable Connector Tester DC24V
Product Specification
| Payment Terms | T/T | Supply Ability | 50 set/week |
| Delivery Time | 5-8 work days | Packaging Details | Pe bag + outer box, or customized requirements |
| Product name | Semi fiber injection machine | Application | Optical fiber epoxy injection |
| Power Supply | 110VAC+/-11VAC 50Hz ; 220VAC+/-22VAC 50Hz | Weight | 2.2 kg |
| Size | 235mmX225mmX63mm | Key Selling Points | Easy to Operate |
| Brand Name | CLX | Model Number | CLX-DJ02 |
| Place of Origin | Guangdong,China | ||
| High Light | Semi Automatic Fiber Epoxy Injection Machine ，Ferrule Fiber Epoxy Dispensing Equipment ，Fiber Epoxy Injection Machine | ||
Semi-automatic Fiber Optic Epoxy Injection Machine for LC SC ST FC Connector ferrule Fiber Optic Epoxy Dispener
Model:CLX-DJ02
Place of Origin:ShenZhen,China
Description
CLX-DJ02 semi-automatic dispenser is controlled by a film tap switch.Can adjust manual, semi-automatic state, the use of digital timing controller accurate to seconds, the correct control of flow, will not waste liquid material, it is easy to change each infusion volume and infusion time.It can solve many problems in stock development. It is simple to use and easy to operate. Equipped with vacuum suction function, it is not easy to fatigue, no waste, and has a wide range of use.
Specifications
| Time Setting | 0.001 sec to 9.999 sec |
| Injecting time | 0.007 sec to 9.999 sec (with air pressure) |
| Cycle break | 0.1 sec to 9.9 sec |
| Input Pressure | 1bar to 7bar (1 bar =1.01972 kg/cm2 =14.5038 psi) |
| Output Pressure | 0.1 bar to 7 bar |
| Repeat Accuracy | 0.00005 sec |
| Minimum Droplet | 0.005 ml |
| Frequency | No fewer than 600 times per minute |
| Input Voltage | 110VAC+/-11VAC 50Hz ; 220VAC+/-22VAC 50Hz |
| Power Consumption | Less than 15 Watt |
| Size | 70 mm x 210 mm x 256 mm |
| Net Weight | Less than 4 kg |
Attention and maintenance:
1, Air pressure cant be more than 7bar(10psi), working air pressure cant be more than 5.5bar (78psi), if the working air pressurer is more than 4 bar, pls use the original parts from the manufacter.
2, The liquid material must be stired evenly before putting to the cyliner needle. It will be better if the liquid material can be stored at the stable temperature of 5 degree centigrade to make sure there is no big change in the density of the liquid material. If the density of the liquid is so high, ( it means the liquid is so viscous, it may be hard to spit out). If the liquid need to be diluted, pls compliant to the instruction of the liquid material manufacture.
3, Dont sharply increase the Vacuum, otherwise, the liquid will be pulled in the catheter by the vacuum. The qty of the vacuum pumpback rely on the air pressure level, working cycle, qty of the liquid to spit. If the qty of the vacuum is too much, the piston will be overset, disturbing the normal work.
4, Avoid to overset the liquid cylinder, otherwise, the liquid will flow to the air cylinder to destroy the internal aprt.
5, Pls clear the stuff left in the cylinder needel when needed. Otherwise the stuff will become hard, then disturbing the vacuum pumpback and stop the cylinder needle.
6, After using the machine, the cylinder needle need to be cleaned every time, otherwise, it is difficult to unload the needle when the liquid becomes hard. Normally, it is easy to remove the liquid from the inside of the cylinder needle, just dipping the parts in the hand water for 5~10minutes, all the part will be cleaned.
7, Pls disposal the used needle and cylinder needle at appropriate place to avoide some i nappropriate liquid pollution
FAQ
1.Are you a factory or a trader?
......we are factory.
2.What is your MOQ?
......MOQ 1 piece.
3.Do you provide sample services?
......Yes, we will provide samples(Samples at prices announced by chuanglixun).
4.How will you ship to me?
....... We will spend 4 to 6 days via DHL or FedEx. Properly extended based on order quantity
5.How do we pay
......Book in advance or multiple payment methods such as T / T and T / L.
6.How long is your product warranty?
......The warranty period is 1 year (the warranty period will provide free repairs, except for consumables). After the warranty period, accessories will continue to be provided and will be charged at cost.
7.Do you provide customized services?
......Yes, we provide customized services, According to customer requirements and description
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Trading Company,Seller
Year Established:
2010
Total Annual:
Three million-Four million
Employee Number:
100~120
Ecer Certification：
Verified Supplier
Shenzhen Chuanglixun Optoelectronic Equipment Limited is founded in 2010,locates in Shenzhen China. Chuanglixun is an independentand innovative high-tech enterprise integrating R&D,production and sales of optical fiber connector production equipment and services. Chuanglixun is focusing on... Shenzhen Chuanglixun Optoelectronic Equipment Limited is founded in 2010,locates in Shenzhen China. Chuanglixun is an independentand innovative high-tech enterprise integrating R&D,production and sales of optical fiber connector production equipment and services. Chuanglixun is focusing on...
Get in touch with us
Leave a Message, we will call you back quickly!