Shenzhen Jiangfan Communication Equipment Co., Ltd.
| Payment Terms | T/T, T/T, D/P, D/A, L/C, MoneyGram |
| Supply Ability | 10000 |
| Delivery Time | 7-10 day |
| Packaging Details | Carton,pearl cotton,bubble bag,plastic bag |
| Wavelength Range | 1260~1650SM |
| Test Wavelength | 1310/1550SM |
| Return Loss | MM≥30SM≥50 |
| Crosstalk | ≥70 |
| PDL | ≤0.05 |
| WDL | ≤0.25 |
| Brand Name | GAPHO |
| Model Number | 1xN Fiber optic switch |
| Place of Origin | China |
View Detail Information
Explore similar products
1x1 Mechanical Fiber Optic Switch 850nm 1310nm For System Monitoring
Single Mode Functional 1x64 Fiber Optic Switch With Multi Port
Low Crosstalk Fiber Optic Switch , 1x2 Optical Switch Solid State Wavelength
1X4 1X8 1X16 MEMS Optical Switch For Communication Systems
Product Specification
| Payment Terms | T/T, T/T, D/P, D/A, L/C, MoneyGram | Supply Ability | 10000 |
| Delivery Time | 7-10 day | Packaging Details | Carton,pearl cotton,bubble bag,plastic bag |
| Wavelength Range | 1260~1650SM | Test Wavelength | 1310/1550SM |
| Return Loss | MM≥30SM≥50 | Crosstalk | ≥70 |
| PDL | ≤0.05 | WDL | ≤0.25 |
| Brand Name | GAPHO | Model Number | 1xN Fiber optic switch |
| Place of Origin | China | ||
| High Light | Fiber Optic Switch 1310nm ，1xN Fiber Optic Switch ，Passive Fiber Optical Switch | ||
◇ features
◇ Application:
description
1×N Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
◇specification
| Parameters | Unit | GP-OSW1×N | |||
| Insertion Loss | dB | 1<N≤32 | 32 <N≤64 | 64 <N≤128 | |
| Type:0.8 Max:1.0 | Type:0.8Max:1.2 | Type:0.8Max:1.3 | |||
| Wavelength Range | nm | 850±40 /1300±40,1550MM | 1260~1650SM | ||
| Test Wavelength | nm | 850/ 1300,1550MM | 1310/1550SM | ||
| Return Loss | dB | MM≥30SM≥50 | |||
| Crosstalk | dB | ≥70 | |||
| PDL | dB | ≤0.05 | |||
| WDL | dB | ≤0.25 | |||
| TDL | dB | ≤0.25 | |||
| ER (PM swtich) | dB | ≥16 (PoIarization Maintaining switch) | |||
| Repeatability | dB | ≤±0.05 | |||
| Durability | Cycles | ≥10 Million | |||
| SwitchingTime | ms | ≤10(Sequence switch time of adjacent channel) | |||
| OpticalPower | mW | ≤500 | |||
| OperatingTemperature | ℃ | -5~+70 | |||
| Storage Temperature | ℃ | -40~+85 | |||
| Relative Humidity | % | 5 ~95 | |||
| Dimension | mm | 135×40×32(N≤12) | 135×60×32(N≤18) | 135×60×38(N≤32) | |
| 150×80×67(N≤64) | 165×100×100(N≤98) | 185×130×130(N≤128) | |||
◇DB-15 male connector (max.1×64)
(max.1×128)
| Pin No. | Signal Name | I / O | Description |
| 2 | D0 | Input | TTL, Channel selection bit 0 |
| 3 | D1 | Input | TTL, Channel selection bit 1 |
| 4 | D2 | Input | TTL, Channel selection bit 2 |
| 5 | D3 | Input | TTL, Channel selection bit 3 |
| 6 | D4 | Input | TTL, Channel selection bit 4 |
| 10 | D5 | Input | TTL, Channel selection bit 5 |
| 11 | /RESET | Input | TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
| 7 | /READY | Output | TTL, Ready (High=Not ready, Low=Ready) |
| 8 | ERROR | Output | TTL, Error (High=Error, Low=No error) |
| 1, 9 | GND | Input | Ground |
| 15 | +5VDC | Input | 5.0±5% VDC Digitalpower supply(max 50mA) |
| 12 | VM | Input | 5.0±5% VDC or 12±5% VDC Drive power supply(max 800mA) |
| 14 | ISP | Input | TTL, Forinternal firmware upgrade of the module, in the normal mode, please suspended thepin; In the upgrade mode, please send the pin to ground. |
| 13 | NA |
| Pin No. | Signal Name | I / O | Description |
| 2 | D0 | Input | TTL, Channel selection bit 0 |
| 3 | D1 | Input | TTL, Channel selection bit 1 |
| 4 | D2 | Input | TTL, Channel selection bit 2 |
| 5 | D3 | Input | TTL, Channel selection bit 3 |
| 6 | D4 | Input | TTL, Channel selection bit 4 |
| 10 | D5 | Input | TTL, Channel selection bit 5 |
| 13 | D6 | Input | TTL, Channel selection bit 6 |
| 11 | /RESET | Input | TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
| 7 | /READY | Output | TTL, Ready (High=Not ready, Low=Ready) |
| 8 | ERROR | Output | TTL, Error (High=Error, Low=No error) |
| 1, 9 | GND | Input | Ground |
| 15 | +5VDC | Input | 5.0±5% VDC Digitalpower supply(max 50mA) |
| 12 | VM | Input | 5.0±5% VDC or 12±5% VDC Drive power supply(max 800mA) |
| 14 | ISP | Input | TTL, Forinternal firmware upgrade of the module, in the normal mode, please suspended thepin; In the upgrade mode, please send the pin to ground |
◇optical route
| Pin No. | Signal Name | I / O | Description |
| 2 | D0 | Input | TTL, Channel selection bit 0 |
| 3 | D1 | Input | TTL, Channel selection bit 1 |
| 4 | D2 | Input | TTL, Channel selection bit 2 |
| 5 | D3 | Input | TTL, Channel selection bit 3 |
| 6 | D4 | Input | TTL, Channel selection bit 4 |
| 10 | D5 | Input | TTL, Channel selection bit 5 |
| 13 | D6 | Input | TTL, Channel selection bit 6 |
| 11 | /RESET | Input | TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
| 7 | /READY | Output | TTL, Ready (High=Not ready, Low=Ready) |
| 8 | ERROR | Output | TTL, Error (High=Error, Low=No error) |
| 1, 9 | GND | Input | Ground |
| 15 | +5VDC | Input | 5.0±5% VDC Digitalpower supply(max 50mA) |
| 12 | VM | Input | 5.0±5% VDC or 12±5% VDC Drive power supply(max 800mA) |
| 14 | ISP | Input | TTL, Forinternal firmware upgrade of the module, in the normal mode, please suspended thepin; In the upgrade mode, please send the pin to ground. |
company profile
We are specialized in providing solutions for optical cable, packaging solutions for optical devices, and manufacturing of other electronic equipment parts. Our products are widely used in optical communication, electronics, medical care, oil pipeline, audio industrial control, radio, instrumentation and other industries.We have a good design and production team to provide customers with high-quality, reliable and efficient products.
In the process of cooperation, our innovation and service awareness are well received by our customers.
The company specializes in the production of optical communication equipment, optical devices, optical jumpers, distribution boxes, distribution frame.Our company
1.Machinery department: provide precision machinery processing, sheet metal parts processing, plastic injection molding processing, processing and manufacturing supporting various parts.
2. Optical communication department: provide customized processing of optical devices such as optical jumper, optical module, optical switch, wave divider, attenuator adapter, coupler, optical splitter, circulator, isolator, collimator, optical amplifier, etc.
FAQ
Q:Can you design and customize production according to my requirements
A:Yes, you can tell us your requirements and ideas, we can design drawings, or provide samples, 2D floor plans or 3D drawings (support proe, solidwork, core, Auto CAD, DXF, DWG, step file formats).
Q: Are you trading company or manufacturer ?
A: We are factory.
Q:When our company be established?
A: We started from year 2013
Q: Can you provide samples for customers?
A: Yes, but the shipping will be charged on the customer's account.
Q:Do you offer OEM services?
A: We accept OEM, ODM. Cable sizes and materials can be customized.
Company Details
Business Type:
Manufacturer
Year Established:
2013
Total Annual:
3000000-3500000
Employee Number:
200~300
Ecer Certification：
Active Member
Shenzhen Jiangfan Communication Equipment Co., Ltd. is a comprehensive enterprise integrating R&D, production, sales and service. The company promotes production efficiency and reduces product costs through continuous technological innovation and new process applications. The company's hig... Shenzhen Jiangfan Communication Equipment Co., Ltd. is a comprehensive enterprise integrating R&D, production, sales and service. The company promotes production efficiency and reduces product costs through continuous technological innovation and new process applications. The company's hig...
Get in touch with us
Leave a Message, we will call you back quickly!