Dawnergy Technologies(Shanghai) Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T |
| Product | fiber optic cable |
| Brand | Dawnergy |
| Fiber count | 24 |
| Loose tube | 3 |
| Max. span | 150 |
| Installation sag | ≥1.0 |
| Brand Name | Dawnergy |
| Model Number | ADSS |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
G652D Aerial Fiber Optic Cable
G657A1 Direct Buried Fiber Cable
Air blowing Cable 12 to 144 CORES GCYFTY
Steel Wire Armored 12 Core OM2 Direct Burial Fiber Cable
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T | Product | fiber optic cable |
| Brand | Dawnergy | Fiber count | 24 |
| Loose tube | 3 | Max. span | 150 |
| Installation sag | ≥1.0 | Brand Name | Dawnergy |
| Model Number | ADSS | Place of Origin | CHINA |
| High Light | ADSS fiber optic cable ，outdoor fiber optic cable ，Outdoor ADSS Fiber Optic Cable | ||
Not to scale, color is only for showing, may be not exact same as real product color
Loose tube construction, tubes with jelly filled, elements (tubes and fillers if necessary) laid up around non-metallic central strength member, polyester yarns used to bind the cable core, water blocking tape, aramid yarns reinforced, 2 ripcords, and then PE outer sheath.
3.1 Fiber color code start from No.1 Blue.
| No. | 1 | 2 | 3 | 4 | 5 | 6 |
| Color | Blue | Orange | Green | Brown | Gray | White |
| No. | 7 | 8 | ||||
| Color | Red | Black | ||||
3.2 Tube color code start from No.1 Blue.
| No. | 1 | 2 | 3 |
| Color | Blue | Orange | Green |
3.3. Filler color is Natural.
| Contents | Unit | Value | |
|---|---|---|---|
| Fiber count | Number | / | 24 |
| Cable structure | / | / | 1+6 |
| Fiber No. per tube | Number | / | 8 |
| Loose tube | Number | / | 3 |
| Central strength member | Material | / | FRP |
| Cable diameter | ±0.5 | mm | 10.4 |
| Cable weight | ±10% | kg/km | 78 |
| Weather condition | / | / | NESC Light |
| Max. span | / | m | 150 |
| Installation sag | / | % | ≥1.0 |
Note: sizes and values without tolerances are nominal values.
| Item | Contents | Value |
| Max. tensile load | MAT | 4000 N |
| MOT | 3000 N | |
| Max. crush resistance | Short term | 1500 N/100mm |
| Min. bending radius | Installation | 20 x cable diameter |
| Operation | 10 x cable diameter | |
| Temperature range | Operation | -20℃ ~ +70℃ |
| Installation | -10℃ ~ +60℃ | |
| Storage/transportation | -20℃ ~ +70℃ |
| Item | Test Method | Acceptance Condition |
|---|---|---|
| Tensile Strength IEC 60794-1-21-E1 | - Load: MAT - Length of cable: ≥ 50m - Load time: 1min | - Fiber strain £ 0.33%. - Loss change £ 0.1dB@1550nm after test. - No fiber break and no sheath damage. |
| - Load: MOT - Length of cable: ≥ 50m - Load time: 10min | - Fiber strain £ 0.05%. - Loss change £ 0.1dB@1550nm. - No fiber break and no sheath damage. | |
| Crush Test IEC 60794-1-21-E3 | - Load: Short term crush - Load time: 1min | - Loss change £ 0.1dB@1550nm after test. - No fiber break and no sheath damage. |
| Torsion IEC 60794-1-21-E7 | - Length: 1m - Twist angle: ±180° - No. of cycle: 10 | - Loss change £ 0.1dB@1550nm after test. - No fiber break and no sheath damage. |
| Cable bend IEC 60794-1-21-E11A | - Diameter of mandrel:20 x OD - Number of turns:4 - Number of cycles:3 | - Loss change £ 0.1dB@1550nm after test. - No fiber break and no sheath damage. |
| Water Penetration IEC 60794-1-22-F5 | - Height of water: 1m - Sample length: 3m - Time: 24h | - No water leak from the cable core of the opposite end. |
| Temperature Cycling IEC 60794-1-22-F1 | - Temperature: -30℃~+70℃ - Time of each step: 12h - Number of cycle: 2 | - Loss change £ 0.1dB/km @1550nm. - No fiber break and no sheath damage. |
| Item | Contents | Value |
| G.652D Optical characteristics | ||
| Attenuation | @1310nm | ≤0.35dB/km |
| @1550nm | ≤0.22dB/km | |
| Dispersion | @1288nm～1339nm | ≤3.5ps/(nm·km) |
| @1550nm | ≤18ps/(nm·km) | |
| Zero-Dispersion wavelength | 1302nm～1324nm | |
| Zero-Dispersion slope | ≤0.092ps/(nm2·km) | |
| Mode field diameter (MFD) | @1310nm | 9.1±0.4μm |
| @1550nm | 10.4±0.5μm | |
| Cladding diameter | 125.0 ± 0.7mm | |
| Cladding non-circularity | £1.0% | |
| Core/cladding concentricity error | £0.6mm | |
| Coating diameter (uncolored) | 245 ± 10mm | |
| Coating/cladding concentricity error | £12mm | |
| Cable cutoff wavelength λcc(nm) | ≤1260nm | |
| Macro bending loss | @1550nm (100turns;Φ60mm) | ≤0.05dB |
| Proof stress level | ≥100 kpsi | |
| Link polarization dispersion (PMDQ) | ≤0.1ps/km1/2 | |
| Polarization mode dispersion (individual) | ≤0.2ps/km1/2 | |
Company Details
Business Type:
Manufacturer
Year Established:
2015
Total Annual:
60000000-62500000
Ecer Certification：
Verified Supplier
Dawnergy is an ISO qualified fiber optic solution provider. With solid production capacity, leading R&D strength and strong customization capabilities in the industry, we have supplied fiber optic products to over 65 countries around the world. Our main products are: Fiber Opti... Dawnergy is an ISO qualified fiber optic solution provider. With solid production capacity, leading R&D strength and strong customization capabilities in the industry, we have supplied fiber optic products to over 65 countries around the world. Our main products are: Fiber Opti...
Get in touch with us
Leave a Message, we will call you back quickly!